Categories - PiShop.us

Sub Categories

Acrylic Case For RPi + DigiOne in Black

$7.45 $14.95

IMPORTANT - Each acrylic case piece is covered with adhesive paper during shipping. Peel the paper off of each piece to expose the pristine glossy surfaces before assembling the case! Click here for the assembly guide. Acrylic Case for...

Notify Me

Pi-UpTime 2.0 UPS Board for Raspberry Pi

$58.50

Pi-UpTime UPS 2.0 is a new and improved version of the Pi-UpTime UPS. (See a comparison chart between the original and the updated version 2.0) The Pi-UpTime UPS 2.0 is designed to work with the Pi-4 or other SBC’s, such as Odroid, Asus, Arduino...

Add to Cart

Pi-EzConnect Terminal Block Breakout HAT

$22.50

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header Key features: Solderless or soldered connections for all...

Notify Me

Pi-BB Bread Board for Raspberry Pi

$28.00

Pi-BB is a powered half-size breadboard ideal for Raspberry Pi™, and compatible with Arduino & other development boards. Use with a Raspberry Pi or standalone for prototyping work. 300 connection points make it convenient to attach any...

Add to Cart

PiZ-EzConnect HAT Kit for Pi Zero

$21.25

PiZ-EzConnect KIT allows you to customize and build your own GPIO connector for a Raspberry Pi or a Pi-clone (e.g. Asus Tinker, PiOrange etc.) All 40 pins used by the Raspberry Pi are exposed. Soldering is required. KIT...

Add to Cart

PiZ-EzConnect Terminal Block HAT for Pi Zero

$21.50

PiZ-EzConnect allows connection to any Raspberry Pi header pins via a terminal block. Like the Pi-EzConnect board, PiZ-EzConnect conforms to the Pi Zero dimensions, making this a nice, compact, easy to use and connect...

Add to Cart

Pi-16ADC Analog-Digital Converter HAT

$38.00

Pi-16ADC is a HAT or board designed for a Raspberry Pi. Pi-16ADC adds sixteen (16) Analog to Digital Converter (ADC) ports. These ports are ideally suited to collect data from analog sensors or other analog devices several times a second. Data...

Notify Me

Pi-BB-RPS, Bread Board With Redundant Power for Pi

$37.00

Pi-BB-RPS provides Redundant Power Supply capability. Second power is the micro-USB power. Power is switched seamlessly between these two sources. Priority is given to power source with higher power Voltage. DC 5V and 3.3V is generated on the board. The...

Add to Cart

Resistor 10K OHM 1/6W 5% AXIAL – Pack of 10

$0.95

This is a 10 Pack of 10K Ω Resistors. 10k Ohm ±5%, 1/6W Through Hole Resistor Axial Flame Retardant Coating, Safety Carbon Film

Add to Cart

Resistor 1K OHM 1/4W 5% AXIAL - Pack of 10

$0.95

This is a 10 Pack of 1K Ω Resistors. 1k Ohm ±5%, 1/4W Through Hole Resistor Axial Flame Retardant Coating, Safety Carbon Film

Add to Cart

Resistor 330 OHM 1/6W 5% AXIAL - Pack of 10

$0.95

This is a 10 Pack of 330 Ω Resistors. 330 Ohm ±5%, 1/6W Through Hole Resistor Axial Carbon Film

Add to Cart

Resistor 4.7K OHM 1/4W 5% AXIAL - Pack of 10

$0.95

This is a 10 Pack of 4.7K Ω Resistors. 4.7k Ohm ±5%, 1/4W Through Hole Resistor Axial Flame Retardant Coating, Safety Carbon Film

Add to Cart

MI:power board for the BBC micro:bit - for Micro:bit V1

$3.95 $5.95

CLEARANCE: This version only works with Micro:bit V1 The MI:power board for the BBC micro:bit brings real portability to your wearable projects. The stylish, lightweight PCB is designed to fit snugly against the BBC micro:bit and...

Add to Cart

2 x AA Battery

$0.95

Features Item Name Alkaline Battery LR6 AA Nominal Voltage: 1.5 V Average Weight:23±1g Average Height: 49.2-50.5mm Average Diameter:13.5-14.5mm Discharging Time:350Minutes Jacket: Aluminum Foil Specifications LR6 1.5v alkaline...

Add to Cart

2x AA Battery Holder with JST Connector (for Micro:bit)

$1.45

For micro:bit kits, hidden for now.

Notify Me

USB-A to Micro-USB-B cable, 45cm, Black (USB 2.0)

$2.95

We think this USB-A to micro-USB B cable is the perfect length, at 45cm/1.5ft. Black in color. This cable is male USB(A) to male micro-USB(B), USB 2.0. Compatible with micro:bit, Raspberry Pi (up to Pi 3B+) and many Arduino boards.

Add to Cart

ElecFreaks Micro:bit Starter Kit (without micro:bit board)

$47.95

This product is for educational purpose in schools and other pedagogical contexts. Please use under adult supervision.Suitable for ages over 10 years old. WITHOUT micro: bit!!! ElecFreaks Micro:bit Starter Kit is designed for children who is beginning...

Choose Options

ZIP Halo for the BBC micro:bit

$14.95

Add some colour to your next coding project with our new Halo board for the BBC micro:bit. The Halo has 24 ZIP LEDs, which are individually addressable full colour LEDs. This means that each LED can display a huge spectrum of colours, allowing...

Add to Cart

SparkFun weather:bit

$15.95 $17.95

The SparkFun weather:bit is a fully loaded “carrier” board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional weather station. With the weather:bit you will have access to barometric pressure,...

Add to Cart

SparkFun moto:bit

$24.95

The SparkFun moto:bit is a fully loaded “carrier” board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional robotics platform. The moto:bit offers a simple, beginner-friendly robotics controller...

Add to Cart