A powerful digital video stick for bold audio visual adventures, with dual RP2040 chips and a conveniently HDMI-shaped output connector to boot! Use PicoVision to make and run your own homebrew games, draw digital art, recreate beloved demos,...

Waveshare 24594 - Waveshare RP2040-Matrix Development Board, Onboard 5×5 RGB LED Matrix, Based On Official RP2040 Dual Core Processor - RP2040-Matrix Specifications RP2040 microcontroller chip designed by Raspberry Pi in the...

Waveshare 24082 - Waveshare RP2040-ETH Mini Development Board, RP2040 Ethernet Port Module, Raspberry Pi Microcontroller Development Board, Based On Official RP2040 Dual Core Processor - RP2040-ETH Specifications Dual-core Arm Cortex...

The Challenger RP2040 SubGHz board is an Arduino/Circuitpython compatible Adafruit Feather format micro controller board based on the Raspberry Pico (RP2040) chip. We wanted to start playing around with ultra wide band (UWB) radios and positioning so we...

Please note that this is a kit consisting of both the Challenger RP2040 NFC board and a 13.56MHz NFC Antenna. The Challenger RP2040 NFC is a small embedded computer, equipped with an advanced on-board NFC controller (NXP PN7150), in the popular Adafruit...

The Challenger RP2040 SubGHz board is an Arduino/Circuitpython compatible Adafruit Feather format micro controller board based on the Raspberry Pico (RP2040) chip. This is a spin-off from our Challenger RP2040 LoRa board but in this case we replaced the...

The Challenger RP2040 LoRa is an Arduino/Circuitpython compatible Adafruit Feather format micro controller board based on the Raspberry Pico (RP2040) chip. This is a spin-off from our Challenger RP2040 WiFi board but we have replaced the WiFi module...

Waveshare 24023 - ESP32-S3 Microcontroller, 2.4 GHz Wi-Fi Development Board, Dual-Core Processor With Frequency Up To 240 MHz The ESP32-S3-Pico is a compact-size microcontroller development board with multiple digital interfaces. Adopts ESP32-S3R2...

A compact 4 channel motor+encoder controller, powered by RP2040. It has RGB and per-motor indicator LEDs plus built in voltage and current sensing. Motor 2040 is a standalone motor controller for driving motors with encoders attached. Encoder motors can...

Waveshare 22809 - Waveshare RP2040-One, 4MB Flash MCU Board Based On Raspberry Pi RP2040 - RP2040-One Board Specifications RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom Dual-core Arm Cortex M0+ processor,...

ESP Prog is an ESP32 Programmer board. It can be used in multiple ways like use it for programming ESP8266, ESP32, or any other microcontroller which needs boot Pin and Reset Pin control along with UART RX, and TX for flashing the MCU with a new...

A programmable 53 x 11 LED matrix / sign with wireless connectivity and oodles of extras! Galactic Unicorn is a very beautiful, all-in-one, RP2040 powered LED matrix perfect for conveying information fabulously (or for sprucing up your desktop,...

A slimline industrial/automation controller with 2.4GHz wireless, powered by Raspberry Pi Pico W. Compatible with 6V to 40V systems. Automation 2040 W Mini is a compact Pico W / RP2040 powered monitoring and automation board. It has a host of useful...

This case is designed to expose the pin headers on your GreatFET One, allowing you to protect your main board while easily stacking neighbors. It is sold separately from GreatFET One in recyclable packaging and comes with all of the hardware required to...

A wireless climate and environmental monitoring system designed to make hooking up weather sensors a breeze (or a squall, or a gale). Enviro Weather is a super slimline all in one board for keeping a (weather) eye on the great outdoors. The onboard...

A wireless environmental monitoring board to keep track of inside conditions in your home, office or other habitat. Onboard sensors can measure temperature, humidity, pressure, gas and light. The top of the range BME688 sensor on Enviro Indoor can...

An all-in-one board for making battery powered contraptions that can move, (optionally) make noise, and talk to the internet! Inventor 2040 is a multi-talented board that does (almost) everything you might want a robot, prop or other mechanical thing to...

An all-in-one, Pico W powered industrial/automation controller with 2.4GHz wireless connectivity, relays and a plethora of inputs and outputs. Compatible with 6V to 40V systems Automation 2040 W is a Pico W / RP2040 powered monitoring and automation...

A postage stamp sized RP2040 development board with a USB-C connection, perfect for portable projects, wearables, and embedding into stuff. While we love the Raspberry Pi Pico we also wanted something smaller and with a bunch more flash on board...

Enter the (LED) matrix with this all-in-one, USB-C powered controller for HUB75 panels. Interstate 75 is a RP2040-based driver board for HUB75-style LED matrices. It's designed to plug neatly into the back of a LED panel, and provides a quick and easy...