ELECFREAKS micro:bit Smart Cutebot Pro Robot Car Kit is a programming robot for STEAM education, it equips with a 4-way infrared line-following sensor, an encoder motor, the LED rainbow light, an ultrasonic sensor, and other devices. With the encoder...

Pinbetween gives you access to all of the micro:bit's pins at the same time as using an edge-connector add-on, and it's completely solderless! The 40-pin male header on Pinbetween lets you use jumper jerky to connect extra bits to your micro:bit while...

Six handy touch-sensitive buttons and LEDs for your micro:bit. Use touch:bit as a controller for games on micro:bit's LED matrix, or combine it with the radio functionality and use it as a controller for your robot. Just slot in your micro:bit, then...

Unlock the secrets of nature with code, engineering, and the Environmental Control Board for micro:bit! The Kitronik environmental control board provides a variety of sensor inputs and connection points for the BBC micro:bit (V1 & V2) and provides...

Take your robotics project to the next level with the Kitronik compact 16 servo driver board for the BBC micro:bit. This board allows up to 16 Remote Control (RC) servos to be driven simultaneously. It is based on the PCA9685 driver IC. The board...

Monitor and analyse the air you breathe with the Kitronik Air Quality Board. Great for home and the classroom. The Kitronik Air Quality Board provides a complete air monitoring and reporting solution for the BBC micro:bit. The wealth of onboard sensors...

The Terminal Breakout board for the BBC microbit does exactly what it says on the tin. It breaks out all of the signal and power pins on the microbit to user friendly terminal blocks. No more untangling M/M or M/F jumper cables from the hastily tidied...

The JST Version Klip Halo V2.0 board for the BBC micro:bit breaks out each of the 19 GPIO pins from the BBC micro:bit, with easily accessible, clearly marked connection points compatible with both crocodile clips and 4mm banana plugs. The edge connector...

The Prong soil moisture sensor for BBC microbit is a sensor board that can be directly mounted to a BBC micro:bit to monitor the moisture present in the soil. The two conductive tines are placed into the soil. Any water or moisture in the soil will...

This is the perfect cable choice for those that want to output music or general sound for the BBC micro:bit, to either headphones or speakers. At one end of the cable are the black and red crocodile clips, which connect to the microbits GND and Pin 0...

Please Note: BBC micro:bit, 2 x AAA Battery Cage and 2 x AAA Batteries are NOT included This Prototyping System for the BBC micro:bit is a great way to start making circuits and making experiments without the need to solder. This prototyping system...

The :MOVE mat line following and activity maps - A1 size is an accessory for :MOVE Motor, :MOVE mini and also the Edison V2 Robot. It can be used just for fun, or as part of a project in the classroom. The mat is double-sided, with a line...

micro:bit Retro Programming Arcade is a color screen joystick expansion board for micro:bit V2, it contains a TFT 160*128 color screen, 4 directional buttons, two A/B buttons and a reset button. micro:bit Retro Programming Arcade can be used with...

The Klip Motor Driver for the BBC micro:bit does much more than just drive motors. It also breaks out pins 0, 1, 2, 3V and GDN (just like the main pads on the BBC micro:bit itself), and there’s a ZIP LED output as well, along with the battery...

Smart Cutebot lithium battery pack. The Lithium battery pack for Smart Cutebot Car is a rechargeable battery in 3.6V, it is able to give a stable and powerful power source. The onboard power management system makes it much easier for charging. We have...

This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a hookup pigtail on the other. Alligator clips are a staple item for any workbench or makerspace, and with these cables you will be able to easily incorporate those...

If you have a standard servo and need to connect it to a board that accepts crocodile clip connections then our new servo to crocodile clip adapter cable is the accessory for you. The adapter cable features 100mm colour coded cables terminating in a...

This is a wind speed sensor with a rain-proof design. It has a standard connector for Octopus brick series products. We can use it to test wind speed. It adopts three half-sphere bowls with a 6CM diameter, presenting 120 degrees branch installation...

With this Bumper add-on for :MOVE mini for the BBC microbit MK2, everyone's favourite little programmable robot buggy just got much better. If you were looking for an add-on that allows for competitive games, then this is the add-on for you. This...

Joystick:bit V2 is a game board based on micro:bit. It contains a 4-direction joystick and 4 undefined buttons. At the same time, it enhances the game experience with its on-board buzzer and vibration motor. Joystick:bit V2 can also be used as a remote...