6 Channel ESP32C3 ADC HAT $22.95 Maximum Compatibility The RPI ADC Hat is compatible with models 2B, 3B, 4B, zero w, w2 and even the 400. All GPIO pins are free for other uses. You can even add another hat first and add the RPI ADC hat on top. What if there is no room in the... Add to Cart
Inky Impression 5.7" (7 colour ePaper/eInk HAT) $69.95 Bold, will hold! A big, beautiful, 5.7" (600 x 448 pixel) 7 colour electronic paper display for Raspberry Pi. This display is considerably bigger than Inky wHAT (check out the comparison photo!) with plenty of screen real estate for text or graphics... Add to Cart
Power over Ethernet HAT (B) for Raspberry Pi 3B+/4B and 802.3af PoE network $22.95 Waveshare 18014 - Power Over Ethernet HAT (Type B) For Raspberry Pi 3B+/4B, 802.3af Power-Sourcing Equipment Required The PoE HAT (B) is a 802.3af-compliant Power Over Ethernet accessory for the Raspberry Pi 3B+/4B. By using this small HAT and some... Add to Cart
Audio DAC SHIM (Line-Out) $12.95 A super-simple, slimline way to hook up a hi-fi amp or powered speakers to your Raspberry Pi! Output punchy digital I2S audio whilst leaving your GPIO pins conveniently accessible. SHIM is a old Yorkshire term meaning 'Shove Hardware In Middle' - we use... Add to Cart
Power over Ethernet HAT (C) for Raspberry Pi 3B+/4B, 802.3af/at-compliant $22.95 Waveshare 19445 - Power Over Ethernet HAT (Type C) For Raspberry Pi 3B+/4B, 802.3af/at Power-Sourcing Equipment Required Features The PoE HAT (C) is a 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 3B+/4B. By using this small... Add to Cart
PiKVM V3 Pre-Assembled $249.95 PiKVM V3 Pre-Assembled Edition After a successful Kickstarter campaign for the PiKVM HAT, we’re excited to offer a complete and ready-to-use PiKVM Pre-Assembled solution! Based on a Raspberry Pi 4, the PIKVM Pre-Assembled Edition is a... Choose Options
ESP8266 WiFi Module for Raspberry Pi Pico, Supports TCP/UDP Protocol $11.95 Waveshare 20182 - ESP8266 WiFi Module For Raspberry Pi Pico, Supports TCP/UDP Protocol Features The Pico-ESP8266 is a WiFi expansion module designed for Raspberry Pi Pico, which can be controlled via UART AT command, and supports TCP/UDP communication... Add to Cart
Dual-Mode Bluetooth Module for Raspberry Pi Pico, SPP / BLE, Bluetooth 5.1 $6.95 Waveshare 21474 - Dual-Mode Bluetooth Module For Raspberry Pi Pico, SPP / BLE, Bluetooth 5.1 Wireless Features The Pico-BLE is a dual-mode Bluetooth 5.1 expansion module designed for Raspberry Pi Pico, which is controlled via UART AT commands, with SPP... Add to Cart
Inky Impression 4" (7 colour ePaper/eInk HAT) $52.95 A vibrant, highly concentrated 4" (640 x 400 pixel) 7 colour electronic paper display for Raspberry Pi. New ePaper screens just keep getting better! We can't resist them with their delicious crispness, impressive low power credentials and enticing... Notify Me
Weather HAT (HAT only) $39.95 A meteorologically minded Raspberry Pi HAT designed to make hooking up weather sensors a breeze (or a squall, or a gale). Weather HAT is a tidy all-in-one solution for hooking up climate and environmental sensors to a Raspberry Pi. It has a bright 1.54"... Add to Cart
296×128, 2.9inch flexible E-Ink display HAT for Raspberry Pi $25.95 Waveshare 16565 - 296×128, 2.9inch flexible E-Ink display HAT for Raspberry Pi, black/white dual-color, SPI interface This is a flexible E-Ink display HAT for Raspberry Pi, 2.9inch, 296×128 resolution, with embedded controller,... Add to Cart
Pimoroni PiGlow $11.95 PiGlow is a spiral nebula of 18 colored, individually-controllable LEDs for your Raspberry Pi. Use it for all sorts of things. And, of course, it fits inside a Pibow case! This diminutive board is compatible with all 40-pin Raspberry Pi... Add to Cart
USB 3.2 Gen1 And Gigabit Ethernet HUB HAT for Raspberry Pi, 3x USB, 1x Gigabit ETH, Driver-Free $31.95 Waveshare 20472 - USB 3.2 Gen1 And Gigabit Ethernet HUB HAT For Raspberry Pi, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free This is a driver-free 3 ports USB 3.2 Gen1 hub HAT for Raspberry Pi, also with a Gigabit Ethernet port, provides more... Add to Cart
2-Channel Isolated CAN FD Expansion HAT for Raspberry Pi, Multi Protections $75.95 Waveshare 17075 - 2-Channel Isolated CAN FD Expansion HAT For Raspberry Pi, CAN FD Support, Multi Onboard Protection Circuits Features The 2-CH CAN FD HAT is a 2-Channel CAN bus expansion HAT designed for Raspberry Pi, supports CAN FD (CAN with... Add to Cart
GFX HAT - 128x64 LCD Display with RGB Backlight and Touch Buttons $22.95 A 128x64 pixel, 2.15" LCD display with snazzy six-zone RGB backlight and six capacitive touch buttons. GFX HAT makes an ideal display and interface for your headless Pi projects. GFX HAT riffs off Pimoroni's beloved Display-O-Tron HAT, but gives... Add to Cart
Skywriter HAT $19.95 Use this 3D interface to sense things floating in the air over it. Detect swipes and the motion of your hand with X, Y and Z positions. Skywriter HAT uses electrical near-field 3D sensing to generate positional data and detect common gestures like... Add to Cart
Display HAT Mini $22.95 A generous 2.0" (320 x 240) IPS LCD display for Raspberry Pi with lots of tasty baked in functionality. Raspberry Pi and accessories are NOT included. Display HAT Mini features a bright 18-bit capable 320x240 pixel display with vibrant colours and... Add to Cart
OnOff SHIM (micro-USB) $8.45 Add a tiny yet convenient power switch to your Pi with OnOff SHIM! Pimoroni's SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare board, not including mounted... Add to Cart
Skywriter: 3D Gesture Sensing Breakout $24.95 The big brother to the Skywriter HAT - Skywriter adds 3D gesture sensing to your project! Using Pimoroni's Python and Arduino libraries you can read off the positional data (x, y, z) and common gestures like flick left, tap,... Add to Cart