Wukong 2040 is a multifunctional Breakout Board designed for Raspberry Pi Pico. In terms of functions, it is equipped with a buzzer, A\B buttons, rainbow lights, motor interface, reset button, etc., to meet the needs of creators for IO programming and...

Raspberry Pi Pico board is NOT included! This one is for all the makers and designers who want to use terminal blocks and GPIO. The Terminal GPIO Expansion allows you to use both terminal blocks and GPIO with male & female header options. With this...

Make the RiPi Pico the hub of your next robot/buggy project with The Kitronik Simply Robotics Board for Raspberry Pi Pico. The Kitronik Simply Robotics Board for Raspberry Pi Pico features 2 Dual H-Bridge Motor Driver ICs (capable of driving 2 brushed...

A retro 2.15" (128x64) mono LCD display for Raspberry Pi Pico with RGBW backlight, buttons and a Qw/ST breakout connector. A Raspberry Pi Pico / Pico W is not included. Pico will need to have pin headers soldered to it This fun 1-bit illuminated...

Power your Pi with a wide range of (DC) input voltages from 3 to 16V! Wide Input SHIM lets you use a range of different DC power supplies with your Pi, including the ubiquitous 12V barrel jack power supplies. It's super-skinny, so you can solder it...

Keybow 2040 - Clicky Keys - PIM565 - A luxe all-in-one 16 key mini mechanical keyboard with hot swap clicky or linear switches and per key customizable RGB lighting. A USB-C cable is NOT included Keybow evolves into its final form with a 4x4 grid...

This neat little add-on board lets you drive two micro metal gearmotors from a Raspberry Pi Pico - tiny robots ahoy! Raspberry Pi Pico, headers and other components are NOT included Solder this SHIM to the back of your Pico and unlock the magical...

Quadruplicate your GPIO pins and attach up to four add-ons to a single Raspberry Pi Pico with our formidable Pico Decker expander board! A Raspberry Pi Pico is NOT included Struggling to choose between Pico add-ons? Mix and match up an epic stack of...

Make some noise with this high quality stereo I2S audio add-on board for your Raspberry Pi Pico, with amplified headphone AND unamplified line level outputs! Raspberry Pi Pico is NOT included. Your Pico will need to have male headers soldered to it...

An easy, solderless, swappable way to use breakouts with your Raspberry Pi Pico - add up to three Pimoroni breakouts (2 x I2C and 1 x SPI) to the sturdy slots and get coding and creating! A Raspberry Pi Pico is not included Pico Breakout Garden Pack...

This ATX Control Board and Wire Set is included in PiKVM V4 products, but is an accessory for PiKVM V3. To remotely manage the power of your computer using PiKVM, you will need to install an ATX adapter board inside the case of the target computer and...

Designed to hold and protect your Raspberry Pi Zero and official Raspberry Pi Camera Module, the Camera Box is great for photography and surveillance projects where a tidy, compact and convenient package is required. Now updated to accommodate the...

Pico Driver Motor HAT is a DC motor control module that is powered by one H-bridge IC L293D with the motor input supply range 6 V-12 V. It is designed to connect 2 DC motors simultaneously or 1 stepper motor that would help the user to make projects in a...

An easy, solderless, swappable way to use breakouts with your Raspberry Pi Pico - add up to six Pimoroni breakouts (4 x I2C and 2 x SPI) to the sturdy slots and get coding and creating! Pico Breakout Garden Base sits underneath your Pico and lets you...

Plug the T-Cobbler into your breadboard (it has pins on the underside), and connect it to your Pi's GPIO header using the included cable, and you're ready to prototype with ease!

4x4x4 LED Cube HAT for Raspberry Pi Pico with 5V DC operating voltage. Pico cube, a monochromatic( Red, Blue, Green) LED with 64, is a fun way to learn programming. It is designed to perform incandescent operations with low energy consumptions, robust...

An LED Bulb for use with microcontrollers. The board is designed to make it super-easy to attach a high brightness bulb to a Raspberry Pi, Pico, Arduino, ESP32 or other microcontroller board. 3V to 6V operation Built-in MOSFET for PWM and on/off...

Turn your Raspberry Pi Pico into a debug probe Raspberry Pi Pico is NOT included This PCB is designed to turn a Pico into a nice debug probe using the PicoProbe software. The kit provides everything you need to turn a Raspberry Pi Pico into a debug...

A 15cm extension cable for a microSD card. Insert your microSD card into one end and then connect the other end to your Pi / PC / anything with a microSD socket and voila, you're connected! Resources Dimensional drawing

These short standoffs will let you securely attach compatible HATs to a Pi Zero or Zero W, to make a nice, slim sandwich. The standoffs have a 3mm screw at one end, which could be used to pass through a Raspberry Pi or other PCB and have a screw...