This standoff set is what ships with the Raspberry Pi PoE HAT. It features 9mm female-female standoffs with matching screws.

Features Acrylic Case for Raspberry Pi 4B + BOSS DAC Protects your components from dust and debris Case Dimensions: 12.5cm x 9.5cm x 5cm * Please note that all acrylic cases we ship, have a protective film (which looks like brown...

A pack with seven Jumbo 10mm LEDs - Blue, white, red, orange, yellow, green & RGB (tri-color)

The Yún rev. 2, Linux powered board with the Arduino simplicity, is the perfect board for your IoT projects! The Yún rev. 2 with the power of a Linux based system that enables advanced network connections and applications...

The Electron 3G Kit is a tiny development kit for creating 3G cellular-connected electronics projects and products. It comes with a Particle SIM card with service in more than 100 countries worldwide. All Particle Hardware is designed from the ground up...

This is a bulk SKU. It includes 10 units of 3ft High Speed Gold Plated HDMI Cable. Fire resistant CL2-rated cable jacket Unbranded cable with no logos or brand markings Thinner conductors than most other passive cables at the same lengths 10...

Glucometer is a medical device for determining the approximate concentration of glucose in the blood. A small drop of blood, obtained by pricking the skin with a lancet, is placed on a disposable test strip that the meter reads and uses to calculate the...

Glucometer is a medical device for determining the approximate concentration of glucose in the blood. A small drop of blood, obtained by pricking the skin with a lancet, is placed on a disposable test strip that the meter reads and uses to calculate the...

The Finch is a robot for computer science education. Its design is the result of a four year study at Carnegie Mellon's CREATE lab. The Finch is designed to support an engaging introduction to the art of programming. It has support for over a dozen...

In 2015 SparkFun developed the BadgerStick as a fun and interactive way for people to learn about soldering and engage with SparkFun products at the multiple trade shows we appeared at. In 2016 we have refined the BadgerStick into what you see here, the...

We all live in a society obsessed by brand names and the latest gadget. Sometimes with reason sometimes with none. The RPI has one major problem with audio. The clocks coming from CPU can only output one frequency clock perfect (very close), resulting...

Network DAC Audio Streamer - 384kHz Airplay / UPNP / DLNA Play all your digital music using this audiophile DAC streamer up to 384kHz. You can use your phone / tablet to stream to it using Airplay / UPNP / DLNA. This unit comes with SD card flashed. Plug...

USB flat “noodle” cables – a standard A to micro-B USB cable, for USB 1.1 or 2.0 – but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat “noodle” cables – a standard A to micro-B USB cable, for USB 1.1 or 2.0 – but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat “noodle” cables – a standard A to micro-B USB cable, for USB 1.1 or 2.0 – but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat “noodle” cables – a standard A to micro-B USB cable, for USB 1.1 or 2.0 – but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat “noodle” cables – a standard A to micro-B USB cable, for USB 1.1 or 2.0 – but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat “noodle” cables – a standard A to micro-B USB cable, for USB 1.1 or 2.0 – but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat “noodle” cables – a standard A to micro-B USB cable, for USB 1.1 or 2.0 – but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 350mA so that it could be driven easily with an Adafruit...