When plugged into any source, the PiJuice Zero acts as an Uninterruptible Power Supply (UPS) using intelligent power management to keep your Raspberry Pi Zero going. With an onboard Real-Time Clock (RTC), programmable LEDs and switches, user-friendly...

The case features a sliding lid allowing for easy access to the PiJuice HAT and battery. Small openings on the side will give you access to the three buttons and two RGB LEDs on the PiJuice so you can stay in control of your project. Case...

The UniPiCase is a secure, feature-rich case made to the best design and fabrication standards. This is our own case design, and it is manufactured here in Canada! Please note, this case is not compatible with the Zero WH. Only Tall versions...

Looking for another way to keep your Raspberry Pi cool? Hook up this 5V Mini Cooling Fan and prevent your hard-working Pi from overheating! Of course, it's also great for use with any small computer or FPGA or motor driver or anything that...

Use this HAT to add PoE+ capability to your Raspberry Pi's Ethernet port. Compatible with Raspberry Pi 4 and Raspberry Pi 3B+. Power-sourcing equipment is required. SPECIFICATION Standard: IEEE 802.3at-2003 PoE Input voltage: 37-57 V DC,...

This is a basic, classic Adafruit Raspberry Pi Camera Board Enclosure with a black base and a clear top. The case is as minimal as it gets, coming in just two pieces of polycarbonate that snap snugly together. This case will keep...

Volume distribution of the RP2040 chip is planned, but there is currently no information on when reels of chips will be available. A microcontroller chip designed by Raspberry Pi. Specification Dual-core Arm Cortex-M0+ processor, flexible clock...

The Pi-KVM v3 HAT Board is designed to work with the Raspberry Pi 4 and provides the following features: HDMI capture device with max resolution 1080p 50Hz and audio support Keyboard & mouse emulation Mass storage emulation (i.e., virtual flash...

Cat6 Ethernet Patch Cable - Snagless RJ45, Stranded, 550Mhz, UTP, Pure Bare Copper Wire, 24AWG, 10ft, Black Save the time and hassle of building Ethernet cables by using these fixed-length UTP Cat6 Ethernet Network Cables! FEATURES Unshielded...

Audiophile-quality music playback for the wonderful Raspberry Pi family of single board computers. Moode Audio is an operating system for the Raspberry Pi that facilitates audio streaming from devices such as smart phones to the Pi. No monitor is...

The SmartiPi Touch Pro is a case for the Official Raspberry Pi display and Raspberry Pi 2,3, and 4.  There is also a mounting point below the display for the Official Raspberry Pi camera. The camera hole can be completely hidden with the included...

The SmartiPi Touch Pro is a case for the Official Raspberry Pi display and Raspberry Pi 2,3, and 4.  There is also a mounting point below the display for the Official Raspberry Pi camera. The camera hole can be completely hidden with the included...

The SmartiPi Touch Pro is a case for the Official Raspberry Pi display and Raspberry Pi 2,3, and 4.  There is also a mounting point below the display for the Official Raspberry Pi camera. The camera hole can be completely hidden with the included...

The SmartiPi Touch Pro is a case for the Official Raspberry Pi display and Raspberry Pi 2,3, and 4.  There is also a mounting point below the display for the Official Raspberry Pi camera. The camera hole can be completely hidden with the included...

Raspberry Pi OS pre-installed on a Class 10 microSD Card. Just pop-in and boot up. Currently shipping on 64GB cards, compatible with all Raspberry Pi models. Raspberry Pi OS (previously known as Raspbian) is a free operating system based on Debian...

Raspberry Pi OS pre-installed on a Class 10 microSD Card. Just pop-in and boot up. Currently shipping on 32GB cards, compatible with all Raspberry Pi models. Raspberry Pi OS (previously known as Raspbian) is a free operating system based on Debian...

FOR USE WITH GIANT BUTTERFLY PCB Hardware Kit [ OPTIONAL ] The hardware kit includes everything  you need to mount the Giant Butterfly PCB on your Raspberry Pi and then mount up to four HATs. 2xM2.5 18 mm M-F header 8xM2.5 12 mm F-F...

Description The CamJam EduKit 2 features the following components all neatly packaged in a project tin: 1 x Breadboard 1 x Immersible temperature Sensor 1 x PIR Sensor 1 x LDR 1 x Active Buzzer 1 x Red 10mm LED 1 x Blue 10mm LED 1 x 4.7K...

Description The CamJam EduKit features the following components all neatly packaged in a project tin: A 400-point breadboard 3 LEDs (Red, Yellow and Green) A button A buzzer Resistors and jumper cables The kit is accompanied by a set of...