Enables power to a USB device to be turned on/off via a USB power switch (MOSFET). Configuration Supplied with the PD (pull down) resistor set (Normally off). Connectors on top for GND / EN / 5V When the EN pin is connected to >2V (5V max) power...

Features Works with VOLT+ With Stepped Attenuator 60W, 3.15Amps DC Male Jack: 3mm x 6.5mm Audiophile low level noise / ripple Comes with the wall plug for your region (UK/US/EU) Support & Downloads CLICK HERE FOR AUDIO...

The Allo Nirvana SMPS was designed to power audio devices with the lowest noise. Two years was spent developing this product, the longest of any Allo product to date! There are 3 types of noise: 1. Differential noise (noise on power lines compared to...

The PiJuice 12 Watt Solar panel is the ideal way to charge and/or power your PiJuice HAT and Raspberry Pi for free when you’re in a sunny location. By using a solar panel and PiJuice, containing our revolutionary PiAnywhere technology,...

PowerBoost 1000C is the perfect power supply for your portable project! With a built-in load-sharing battery charger circuit, you'll be able to keep your power-hungry project running even while recharging the battery! This little DC/DC boost...

Cell Type Cylindrical LiCoO2 battery Nominal Voltage 3.7V Nominal Capacity 2200mAh Cycle Life >300times Discharge Cut-off Voltage 2.75V Charging Cut-off Voltage 4...

These big batteries are great for the UPS Pico HAT, when you're looking for long run times. Quality Lithion Ion battery packs with JST XHP-2 connectors. Specifications Model 22650 3.2V 12Ah, 38.4Wh Dimensions 68 x 54 x 54mm Weight...

USB-C Power Supply - 5.1V 3.0A - UL Listed - Black - For Raspberry Pi 4B 1GB/2GB/4GBThis is a high quality switching ‘wall wart’ AC to DC 5.1V 3.0A USB-C wall power supply manufactured specifically for projects that require a higher level of...

The MonkMakes Power for micro:bit opens up lots of ways of powering your micro:bit. This tiny board has a standard DC barrel jack socket at one end and provides a regulated 3.3V output that you can use to power your micro:bit using the JST battery...

Say goodbye to hazardous high voltage wiring and create the Internet of Things with safe, reliable power control. The IoT Power Relay from Digital Loggers is custom designed to fit your every need when developing projects...

Music and linear power supply have been always a good match. The main problems of LPS is extremely inflated pricing and no data. Using a transformer will not automatically give you a better PSU. Worst is that most of manufacturers include no testing.....

Cell Type Cylindrical LiCoO2 battery Connector Type XHP-2 Connector Lenth 55mm (2-1/8") Nominal Capacity 2200mAh Cycle Life >300times Discharge Cut-off Voltage 2.75V Charging Cut-off Voltage 4.2V Housing...

The Solar:Bit is the environmentally friendly way to power your BBC micro:bit and learn about solar power! It includes a 5W solar panel and 1500mAh rechargeable battery pack with charge controller. The battery pack can be charged in about a day using the...

Oh so adorable, this is the tiniest little lipo charger, so handy you can keep it any project box! It's also easy to use. Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into...

NOTE: This product is only designed for use with Adafruit solar panels. We cannot guarantee this will work with solar panels purchased elsewhere. A 2.1mm adapter cable is also required to adapt a solar panel to the DC power jack. Make your projects to...

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 150mAh for a total of about 0.6 Wh. If you need a larger...

5,000 mAh Lithium Ion battery that can be used with the PiJuice HAT module. The PiJuice HAT comes with a 1820mAh as standard, so this 5,000mAh will give you a massive boost! Perfect for remote projects where you want to ensure PiJuice will keep...

These big batteries are great for the UPS Pico HAT, when you’re looking for long run times. Quality Lithion Ion battery packs with JST XHP-2 connectors. Specifications Model 22650 3.2V 8Ah, 25.6Wh Dimensions 68 x 46 x...

12,000 mAh Lithium Ion battery that can be used with the PiJuice HAT module. The PiJuice HAT comes with a 1820mAh as standard, so this 12,000mAh will give you a massive boost! Perfect for remote projects where you want to ensure PiJuice will...

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of about 4.5 Wh. If you need a larger battery,...