If you're going to be adding and removing wires to a project, these 2.54 pitch headers are an ideal way to make it easy and reliable. This box has a useful selection. Includes 2x male 2.54mm 2x20 header 10x male 2.54mm 1x20 header 4x male 2.54mm...

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then...

Waveshare 18995 - Raspberry Pi 400 GPIO header adapter, header expansion, 2x 40PIN header. Features Designed for Raspberry Pi 400 Color-coded header Easy expansion Included PI400-GPIO-ADAPTER-B x 1 Screws pack x 1 Outline...

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. Raspberry Pi Zero not included If your soldering isn't quite up to scratch, or you just don't...

This is a row of 40 break away headers spaced 0.1" apart with long pins on both sides. This header is especially useful when you need to connect a PCB to a solderless breadboard. Each header can be broken apart to your preference to fit custom PCBs or...

Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made extra-tall and extra-long 2x20 female header. The female header part has extra spaces to make it 23.5 mm tall: when placed on your Pi, a PCB will clear the...

This 'shorty' 2x20 header is great for a slim connection to your Raspberry Pi model A+ or B+, it's basically the  through-hole version of the SMT GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header. This header is for super-slim...

Stack on top of your official POE HAT with this custom-made extra-tall 2 x 2 pin female header and 2 x 20 pin female header. This is a set of two headers which allows you to stack a POE HAT and another HAT on top of your Raspberry Pi This is...

PH Connector Header - S4B-PH-K-S(LF)(SN) - Through Hole - Right Angle - 4 position - 0.079" (2.00mm) This is a thin, low-profile 2.0mm pitch connector. It is designed to meet the demand for high-density connection of internal wires to...

Here's a snazzy accessory for your Raspberry Pi Zero or Zero W, a color-coded 2x20 header! This Color Coded Header takes the mystery out of your Raspberry Pi's 2x20 pinout. No longer will you stare in confusion at all 40 pins, trying to count...

GPIO Hammer Header (Solderless) – Male Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. If your soldering isn't quite up to scratch, or...

A row of 40 angled headers - break to fit. Used with custom PCBs or general custom headers. Specifications Pin pitch: 2.54 mm Length: 100mm (~4") Material: plastic, metal

Connect your own PCB to a Raspberry Pi with this normal-height female header.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3mm of pins, compared with...

A 4-Way Riser perfect to use with the Raspberry Pi PoE HAT! SPECIFICATIONS Pitch: 2.54mm Gender of Connector: Female Number of Pins: 2 x 2 Pin Type of Row: Double-Row Body Orientation: Straight DIMENSIONS Overall Height: 11.2 mm Exposed...

Connect your own PCB to a Raspberry Pi and stack on top with this normal-height female header with extra long pins.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has extra...

Connect your own PCB to a Raspberry Pi with this extra-tall female header. The female header part has extra spaces to make it 13.5 mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. This header has 3mm of pins, compared with...

If we could eat headers we’d have them for breakfast, lunch, and dinner. But we can’t : ( So we’re making the best of it and selling them! This 2×20-pin strip, right-angle female header is a perfect companion piece...

Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made 2x20 female header. The female header part has extra spaces to make it tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. The stacky pin...

Description Three rows in a right angle header!? Yes! These chunks of 0.1″ header has yet-another-row – handy for when you want to connect cables that come in sets of three, like perhaps sensors, or servos. These plug into any standard 0...

A dual row of headers – break to fit. 2x20 pins that can be cut to any size. Dimensions: Upper pin length: 6.0mm Plastic height: 2.5mm Lower pin length: 3.0mm