Transparent 5mm tri-color LEDs with separate red, green and blue LED chips inside! Nice indicator, and fun to color-swirl. 60 degree viewing angle. We like diffused RGB LEDs because they color mix inside instead of appearing as 3 distinct LEDs. These...

Round and round and round they go! 16 ultra bright smart LED NeoPixels are arranged in a circle with 1.75" (44.5mm) outer diameter. The rings are 'chainable' - connect the output pin of one to the input pin of another. Use only one microcontroller pin to...

Pimoroni has stepped up their LED game! Unicorn HAT HD crams 256 RGB LEDs, in a 16x16 matrix, onto a single HAT. High-definition rainbow goodness! You can still use it for all of the same things as the regular Unicorn HAT, but with 4 times as many...

We crammed ALL THE NEOPIXELS into this strip! An unbelievable 144 individually-controllable LED pixels on a flexible PCB. It's completely out of control and ready for you to blink. This strip has a white mask, and an extra heavy flex PCB...

Waveshare 13992 - 1.5inch OLED display Module, 128x128 pixels, 16 gray scale, SPI/I2C interface This is an OLED display module, 1.5inch diagonal, 128x128 pixels, 16 gray scale, with embedded controller, communicating via SPI or I2C interface...

A pack with seven Jumbo 10mm LEDs - Blue, white, red, orange, yellow, green & RGB (tri-color)

Need some really bright LEDs? We are big fans of these clear red LEDs, in fact we use them exclusively in our kits. They are very bright and have about 20degree LED beam. They go easily into a breadboard and will add that extra zing to your project...

RGB Pixels are digitally-controllable lights you can set to any color, or animate. Each RGB LED and controller chip is molded into a 'dot' of silicone. The dots are weatherproof and rugged. There are four flanges molded in so that you can 'push' them...

Waveshare 15868 - 0.96inch LCD display Module, IPS screen, 160x80 HD resolution, SPI interface This is a general LCD display Module, IPS screen, 0.96inch diagonal, 160x80 HD resolution, with embedded controller, communicating via SPI interface. It...

Diffused 5mm tri-color LEDs with separate red, green and blue LED chips inside! Nice indicator, and fun to color-swirl. 60 degree viewing angle. We like diffused RGB LEDs because they color mix inside instead of appearing as 3 distinct LEDs. These are...

These are our favorite general-purpose LED’s. Light up your project! Pack of 10 diffused yellow LEDs 5mm diameter 30° viewing angle 588nm wavelength 1.8V Forward Voltage, at 2mA current 50 mcd brightness rating

These are our favorite general-purpose LED’s. Light up your project! Pack of 10 diffused red LEDs 5mm diameter 30° viewing angle 631nm wavelength 1.8V Forward Voltage, at 2mA current 50 mcd brightness rating

These are our favorite general-purpose LED’s. Light up your project! Pack of 10 diffused green LEDs 5mm diameter 30° viewing angle 570nm wavelength 1.8V Forward Voltage, at 2mA current 38 mcd brightness rating

MAX7219 Dot matrix LED Display Module Product Description 1.A single module can drive an 8 * 8 common cathode lattice. 2.Module Operating voltage: 5V. 3.Module size: 5 cm long X 3.2 cm wide X 1.5 cm high. 4.With four screws hole, aperture 3mm,...

Infrared LEDs are used for remote controls (they’re the little LED in the part you point at your TV) and ‘night-vision’ cameras, and these little blue guys are high powered ones! They are 940nm wavelength, which is what nearly all...

Add some colour to your next coding project with our new Halo board for the BBC micro:bit. The Halo has 24 ZIP LEDs, which are individually addressable full colour LEDs. This means that each LED can display a huge spectrum of colours, allowing...

Need some really bright LEDs? We are big fans of these clear blue LEDs, in fact we use them exclusively in our kits. They are very bright and have about 20 degree LED beam. They go easily into a breadboard and will add that extra zing to your project...

These are very bright LEDs. They are so bright that it hurts to look directly at them. Please take a look at the pictures to get an idea of the intensity. The lense is clear, but this model is red. Features 9,000mcd brightness Standard size - T1...