Waveshare 19739 - UPS HAT (C) For Raspberry Pi Zero, 5V Uninterruptible Power Supply, Multi Battery Protection Circuits - UPS HAT (C) SAFETY CAUTIONS Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury,...

Waveshare 23884 - Uninterruptible Power Supply (UPS) Module, Supports Charging And Power Output At The Same Time, 3S & 5V 5A Output - UPS Module 3S (EN) This Uninterruptable Power Supply (UPS) module takes three 18650 lithium-ion...

Waveshare 22850 - PoE UPS Uninterruptible Power Supply Mini-Computer Designed For Raspberry Pi Compute Module 4, Gigabit Ethernet, Dual HDMI, Quad USB2.0 - CM4-POE-UPS-BOX (US) Please note that the battery length SHOULD be less than 67mm, some...

Guaranteed reboot after shutdown. After a soft shutdown, the power on a Raspberry Pi needs to be toggled to reboot. This is done by pulling the USB power source out or installing an on/off switch. This becomes an issue when a Raspberry Pi is deployed...

Waveshare 20567 - UPS HAT (B) For Raspberry Pi, 5V Uninterruptible Power Supply, 5A High Current, Pogo Pins Connector Features Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc. I2C bus communication, monitoring the...

Waveshare 19694 - UPS Module For Raspberry Pi Pico, Uninterruptible Power Supply Raspberry Pi Pico and Li-ion battery are NOT included. SAFETY CAUTIONS Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property...

When plugged into any source, the PiJuice Zero acts as an Uninterruptible Power Supply (UPS) using intelligent power management to keep your Raspberry Pi Zero going. With an onboard Real-Time Clock (RTC), programmable LEDs and switches, user-friendly...

Pi Modules PM_039 - PIco Double Li-Ion 18650 Battery Holder - Double 18650 batteries Holder for UPS Pico HV3.0A/B/B+ HATs Designed Especially for the Raspberry Pi® models B, B+ The PIco Double Li-Ion 18650 Battery Holder is...

Pi Module - PIco Fan Kit HV3.0 - PM_007 - w/ Fan, Mounting screws, Temperature sensor, Spacers & Connector Note: This kit requires assembly and soldering. Each PIco Fan Kit need to be installed on UPS PIco by soldering of few...

Pi Modules - UPS PIco HV3.0B+ HAT Stack 450 PoE - PM_073 Note: This product requires soldering. The Raspberry Pi PoE HAT is NOT included and needs to be ordered separately. The UPS PIco HV3.0B+ HAT Stack 450 PoE is an...

Pi Modules - UPS PIco HV3.0B+ HAT Top-End 450 - PM_072  The UPS PIco HV3.0B+ HAT Top-End 450 is an advanced Intelligent Mobile Power Bank and Uninterruptible Power Supply especially designed for...

External Programming Cable OR RPi Serial Console Do I need this cable? No. You can develop code, debug and program the Sleepy Pi or Sleepy Pi 2 from your Raspberry Pi quite happily… …But there are times when you...

Maximize the Battery Life on Your Raspberry Pi Key Features Daughter board for RPi Zero / ZeroW, A+ or B+,Rpi 2 or Rpi3B/3B+ ->Plugs into the RPi GPIO 5.5 – 30V – Power / Battery input Arduino – ATMEGA328P On /...

Tiny-UPS 3.0 – New & Improved - A tiny sized UPS for USB devices Tiny-UPS provides UPS for 5V USB or other power via an external Li-Polymer or Li-Ion battery (batteries are not included). Size and capacity of the battery does not matter...

Our own uninterruptible power source for the Raspberry Pi! The UPS HAT is powerful enough to continuously deliver 3 Amps of current to the Raspberry Pi, with an Ultra lower power STM32 controller to make the Raspberry Pi last longer when powered with...

A Raspberry Pi Zero and Pi Zero W (abbreviated here as PiZ) is a small size computer tethered to the wall power outlet. It needs the power via the micro-USB cable to operate. When PiZ needs to be moved from one location...

Pi-UpTime UPS 2.0 is a new and improved version of the Pi-UpTime UPS. (See a comparison chart between the original and the updated version 2.0) The Pi-UpTime UPS 2.0 is designed to work with the Pi-4 or other SBC’s, such as Odroid, Asus, Arduino...

External Arduino Programming Cable lets you use a PC or Mac to develop Sleepy Pi Apps Compatible with Sleepy Pi 1 and Sleepy Pi 2 Do I need this cable? No. You can develop code, debug and program the Sleepy Pi or Sleepy Pi 2 from...

This is the latest version of Sleepy Pi Board - Sleepy Pi 2. Maximize the Battery Life on your Raspberry Pi Raspberry Pi add-on board for Smart Power Management and additional GPIO. Run Raspberry Pi on Battery Power Extend RPi battery life from...