Features Set of 3 Aluminum heat sinks Compatible with the Raspberry Pi 4 Model B board 3M 8810 adhesive thermal tape on the back Can be used with any other devices  Reduce chip hot-spots and increase thermal dissipation surface...

Heatsink 1: Size: 14 x 14 x 6mm Baseboard thickness: 1.0mm Fin thickness: 0.7mm Fin number: 7 pieces Fin space width: 1.5mm Heatsink 2: Size: 9 x 9 x 4mm Baseboard thickness: 1.0mm Fin thickness: 0.9mm Fin number: 5 pieces Fin space...

The Active Cooler provides an alternative cooling solution for users who wish to use their Raspberry Pi 5 under sustained heavy load without a case. It combines a large metal heatsink with a variable-speed blower, again powered and controlled via the fan...

High quality aluminum heatsink for cooling the Raspberry Pi Zero's processor. Base with 3M thermal adhesive. Compact and fits into our Unipicase Zero Standard.  Technical Details Dimensions: 11 x 11 x 5.3 mm  Material: Anodized...

Looking for another way to keep your Raspberry Pi cool? Hook up this 5V Mini Cooling Fan and prevent your hard-working Pi from overheating! Of course, it's also great for use with any small computer or FPGA or motor driver or anything...

Works with Raspberry Pi 4 and the official Raspberry Pi 4 Case. Designed for overclockers and other power users, it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. Features Fits perfectly into the lid of the...

Features A fan HAT that uses a 40mm cooling fan to prevent overheating on the Raspberry Pi 3 and Raspberry Pi 4. Comes with a power button that can be used to do forced shutdowns, safe shutdowns, and reboots to the Pi. Only needs a one-line script...

If you plan on connecting a cable to the GPIO connector, you might need a GPIO Stacking Header for Pi - Extra-long 2x20 Pins An armor aluminum alloy case with dual cooling fan designed for the Raspberry Pi 4B. This heat sink casing will provide...

This large (40x30x5mm) heatsink will let you eek out some extra thermal performance from power-hungry tasks. This XL heatsink is specifically designed for the Raspberry Pi 4. It will also fit most cases. It's just 5mm tall, so it should work with...

Waveshare 19623 - Dedicated Aluminum Heatsink For Raspberry Pi Compute Module 4 CM4, Notched For Antenna CM4 and based boards are NOT included Please note that the standoffs in this kit can thread directly into the heatsink. In this case the nuts are...

Adhesive thermal layer Keep your Raspberry Pi cool with this heat sink Reduces the risk of hardware failure due to overheating Low profile, will fit into most cases Simple, passive cooling. no need for noisy fans Perfectly sized for the Pi's...

High quality aluminum heatsink for cooling the Raspberry Pi Zero 2 W's processor. Base with 3M thermal adhesive. Technical Details Dimensions: 14 x 14 x 6 mm Material: Anodized Aluminum  Thermal conductive 3M adhesive

Waveshare 21308 - Dedicated Aluminum Heatsink For Raspberry Pi Zero Series, Zero / Zero 2 W Aluminum Heatsink For Zero Series: Dedicated Aluminum Heatsink, Corrosion / Oxidation Resisting, Better Heat Dissipation Tailored For Raspberry Pi Zero...

If you plan on connecting a cable to the GPIO connector, you might need a GPIO Stacking Header for Pi - Extra-long 2x20 Pins An armor aluminum alloy case with dual cooling fan designed for the Raspberry Pi 4B. This heat sink casing will...

A set of two fans mounted on an aluminum heatsink to cool the CPU. Ideal for Raspberry Pi 4 Model B and Raspberry Pi 3 Model B+(Plus)!  Features Pre-applied thermal tape for easy installation Speed: 7500 rpm/min Designed for Raspberry Pi 3B+...

Make your Raspberry Pi 4 seriously cool with Fan SHIM! This 30mm no-solder, controllable CPU fan with RGB LED and tactile switch will give your Raspberry Pi significantly better thermal performance. It's whisper-quiet too! Fan SHIM uses...

Waveshare 22096 - Dedicated All-In-One 3007 Cooling Fan For Raspberry Pi Compute Module 4 CM4, Speed Adjustable, With Thermal Tapes Specifications General Low-profile, PWM speed adjustment Interface 4-wire PWM speed-adjustable fan...

Overview CM4 Cooler is a heatsink specially designed for Raspberry Pi Compute Module 4, which ensure Compute Module 4 to work reliably. Due to the higher performance of Compute Module 4, its power consumption gets higher than Compute Module 3+. The...

Waveshare 26044 - Active Cooler For Raspberry Pi 5, Active Cooling Fan, Aluminium Heatsink, With Thermal Pads Specifications Input voltage 5V DC (supplied via four-pin fan header on Raspberry Pi 5) Fan speed control Pulse width...

Looking for another way to keep your Raspberry Pi cool? Hook up this 5V Mini Cooling Fan and prevent your hard-working Pi from overheating! Of course, it's also great for use with any small computer or FPGA or motor driver or anything...