Waveshare 18396 - 5inch Capacitive Touch Display For Raspberry Pi, 800×480, DSI Interface Features Size: 5" Resolution: 800×480 Display Port: DSI Power Consumption: Low Power Touch Type: Capacitive Touch Points: 5-Points Touch Port:...

Waveshare 21435 - 2.8″ Touch Screen Expansion For Raspberry Pi Compute Module 4, Fully Laminated Display, Gigabit Ethernet, USB2.0, Optional Interface Expander Fully Laminated Touch Screen: 2.8″ Display With 5-Point Capacitive Touch Control,...

A hackable, programmable badge with E Ink® display, powered by Raspberry Pi RP2040. In honour of Raspberry Pi's 10th birthday, we've fused a RP2040 microcontroller with an EPD display to make a stylishly monochrome, maker friendly, e-paper badge(r)...

Crisp, high-res, with great viewing angles (IPS), this 1.3" square, 240x240 pixel, colour LCD will add some pizzazz to your Raspberry Pi or Arduino projects. The square form-factor of this display makes it great for cramming lots of information...

Bold, will hold! A big, beautiful, 5.7" (600 x 448 pixel) 7 colour electronic paper display for Raspberry Pi. This display is considerably bigger than Inky wHAT (check out the comparison photo!) with plenty of screen real estate for text or graphics...

High-res and vibrant, with sweet viewing angles (IPS), this 1.3" round LCD screen will add some stylish curves to your Raspberry Pi projects. ow … ound … round … ground - this unconventional round display is ideally shaped for...

Raspberry Pi Pico and Pico Omnibus are not included A spacious 2.0" (320 x 240) IPS LCD display for Raspberry Pi Pico, with four buttons, an RGB LED and plenty of room for your Pico projects! This 18-bit capable 320x240 pixel IPS display adheres...

A handy little cable that connects to the JST connector on the underside of HyperPixel 4.0, allowing you to use I2C devices with your Raspberry Pi at the same time as the display. Note: this cable can be used with older models of HyperPixel 4...

Waveshare 21433 - 4inch HDMI Capacitive Touch IPS LCD Display (C), 720×720, Fully Laminated Screen Features Size: 4" Resolution: 720×720 Display Port: HDMI Display Panel: IPS Viewing Angle: 170° Touch Type: Capacitive Touch...

Waveshare 21225 - 7″ Touch Screen All-In-One Kit Designed For Raspberry Pi CM4, 5MP Camera, Aluminum Case Specifications CM4 socket suitable for all variants of Compute Module 4 Networking Gigabit Ethernet RJ45 M.2 M KEY, supports...

Waveshare 17527 - 5.5inch Capacitive Touch AMOLED Display, With Protection Case, 1080×1920, HDMI, Toughened Glass Panel The display orientation is portrait by default, 1080×1920 resolution (H×V). Change the software config for...

A vibrant, highly concentrated 4" (640 x 400 pixel) 7 colour electronic paper display for Raspberry Pi. New ePaper screens just keep getting better! We can't resist them with their delicious crispness, impressive low power credentials and enticing...

Waveshare 16565 - 296×128, 2.9inch flexible E-Ink display HAT for Raspberry Pi, black/white dual-color, SPI interface This is a flexible E-Ink display HAT for Raspberry Pi, 2.9inch, 296×128 resolution, with embedded controller,...

A uniquely square, high-resolution, high-speed, 4.0" display with optional touchscreen for Raspberry Pi – it's hip to be square! HyperPixel 4.0 Square has all the great features of our standard HyperPixel 4.0—a crisp, brilliant IPS display,...

Waveshare 20716 - 2.13inch Touch E-Paper E-Ink Display For Raspberry Pi Zero, 250×122 Pixels, with ABS Protection Case Features 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels Supports waken up by user-defined...

Waveshare 20806 - 7inch Capacitive Touch Display For Raspberry Pi, With 5MP Front Camera, 800×480, DSI Interface Device & System Support Raspberry Pi Supports Raspberry Pi OS, 5-points touch, driver free Supports Ubuntu, single point...

A 128x64 pixel, 2.15" LCD display with snazzy six-zone RGB backlight and six capacitive touch buttons. GFX HAT makes an ideal display and interface for your headless Pi projects. GFX HAT riffs off Pimoroni's beloved Display-O-Tron HAT, but gives...

A perfectly round, high-resolution, high-speed 2.1" touchscreen display for Raspberry Pi. HyperPixel 2.1 Round has all the great features of our other HyperPixels - crisp, brilliant IPS display, touchscreen, and high-speed DPI interface—it's just...

A generous 2.0" (320 x 240) IPS LCD display for Raspberry Pi with lots of tasty baked in functionality. Raspberry Pi and accessories are NOT included. Display HAT Mini features a bright 18-bit capable 320x240 pixel display with vibrant colours and...

Waveshare 19750 - 2.23inch OLED Display Module For Raspberry Pi Pico, 128×32 Pixels, SPI/I2C Interface - Pico-OLED-2.23 Raspberry Pi Pico is NOT included Features Adopts both 4-wire SPI and I2C interface, better compatibility, fast data...