Power Supply 19V 3.4A, 65W - 5.5mmx2.5mmx12mm Barrel - For IQaudio DigiAMP+This high quality power adapter delivers a stable 19V @3.4A and features a 5.5 mm x 2.5 mm barrel connector making it perfect for the IQaudio DigiAMP+...

USB-C Power Supply - 5.1V 3.0A - UL Listed - Black - On/Off Switch - For Raspberry Pi 4/400This is a high quality switching ‘wall wart’ AC to DC 5.1V 3.0A USB-C wall power supply manufactured specifically for projects that require a higher...

Manufacturer:            GPType of battery:         lithiumRated voltage:            3VCell size coin:             CR1220Number of...

BATTERY CHEMISTRY LithiumBATTERY FEATURE Primary (Disposable)BATTERY FORM FACTOR CR1220BATTERY RATED VOLTAGE 3 V DIAMETER 12.5 mmDEPTH 2 mmPRODUCT WEIGHT 0.8 g

Enables power to a USB device to be turned on/off via a USB power switch (MOSFET). Configuration Supplied with the PD (pull down) resistor set (Normally off). Connectors on top for GND / EN / 5V When the EN pin is connected to >2V (5V max) power...

5V 3A USB-C International Universal Power Supply Raspberry Pi 4 and Pi 400 CompatibleSPECIFICATIONS Plug Type: Aus, Euro, US Input Voltage AC: 100V - 240V Output Voltage Nom. 5V Output Current Max: 3A Power Supply Output Type: Fixed Output...

PowerBoost 1000C is the perfect power supply for your portable project! With a built-in load-sharing battery charger circuit, you'll be able to keep your power-hungry project running even while recharging the battery! This little DC/DC boost...

Cell Type Cylindrical LiCoO2 battery Nominal Voltage 3.7V Nominal Capacity 2200mAh Cycle Life >300times Discharge Cut-off Voltage 2.75V Charging Cut-off Voltage 4...

These big batteries are great for the UPS Pico HAT, when you're looking for long run times. Quality Lithion Ion battery packs with JST XHP-2 connectors. Specifications Model 22650 3.2V 12Ah, 38.4Wh Dimensions 68 x 54 x 54mm Weight...

USB-C Power Supply - 5.1V 3.0A - UL Listed - Black - For Raspberry Pi 4B 1GB/2GB/4GBThis is a high quality switching ‘wall wart’ AC to DC 5.1V 3.0A USB-C wall power supply manufactured specifically for projects that require a higher level of...

USB-C Type-C USB Raspberry Pi Power Switch for Raspberry Pi 4 Model BOne Switch On/Off Power with Dramatically Reduces Wear and Tear on Sensitive USB-C Connectors. No need to pull the cable to restart or reboot your devices, just press the button to...

The MonkMakes Power for micro:bit opens up lots of ways of powering your micro:bit. This tiny board has a standard DC barrel jack socket at one end and provides a regulated 3.3V output that you can use to power your micro:bit using the JST battery...

DIGITAL LOGGERS - IoT Power Relay II - Enclosed High-power Power Relay for Arduino, Raspberry Pi, PIC or Wifi, Relay Shield, Automatic Say goodbye to hazardous high voltage wiring and create the Internet of Things with safe, reliable...

Cell Type Cylindrical LiCoO2 battery Connector Type XHP-2 Connector Lenth 55mm (2-1/8") Nominal Capacity 2200mAh Cycle Life >300times Discharge Cut-off Voltage 2.75V Charging Cut-off Voltage 4.2V Housing...

The official Raspberry Pi USB-C power supply for the Raspberry Pi 4B and Pi 400. This 15W power supply features the USB-C connection found on the Raspberry Pi 4. It provides 3.0A of current, the maximum that the Pi 4 can accept...

The official Raspberry Pi USB-C power supply for the Raspberry Pi 4B and Pi 400. If the white power supply is out of stock, it still might be available in Black. This 15W power supply features the USB-C connection found on the Raspberry Pi 4. It...

The Solar:Bit is the environmentally friendly way to power your BBC micro:bit and learn about solar power! It includes a 5W solar panel and 1500mAh rechargeable battery pack with charge controller. The battery pack can be charged in about a day using the...

Oh so adorable, this is the tiniest little lipo charger, so handy you can keep it any project box! It's also easy to use. Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into...

NOTE: This product is only designed for use with Adafruit solar panels. We cannot guarantee this will work with solar panels purchased elsewhere. A 2.1mm adapter cable is also required to adapt a solar panel to the DC power jack. Make your projects to...

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 150mAh for a total of about 0.6 Wh. If you need a larger...