Categories - PiShop.us

Sub Categories

PiTFT Plus 480×320 3.5″ TFT+Touchscreen for Raspberry Pi A+/B+/2/3

$39.95

Is this not the cutest, little display for the Raspberry Pi? It features a 3.5″ display with 480×320 16-bit color pixels and a resistive touch overlay just like our popular original, but this one is engineered specifically to work...

Notify Me

Full sized breadboard – 830 points

$6.45

This is a ‘full-size’ breadboard, 830 tie points. Good for small and medium projects. It’s 2.2″ x 7″ (5.5 cm x 17 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails...

Add to Cart

Assembled Pi T-Cobbler Plus – GPIO Breakout for A+/B+/Pi2/Pi3/Zero

$7.95

The Raspberry Pi B+ / Pi 2 / Pi 3 / Pi 4 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably...

Add to Cart

Nylon 12mm M2.5 Standoff Set – Pack of 4

$1.45

Nylon Standoffs - M2.5x12mm - Pack of 4 - Black

Notify Me

SNES Retro Game Controller – USB

$7.95

Play your computer games with an old-school / Retro-feel! This USB controller allows you to play your favorite PC games by just plugging in your USB control! It’s that simple! Just Plug n’ Play no extra drivers needed! The super 16-bit...

Add to Cart

Nylon 11mm Standoff Set – Pack of 4

$1.45

This pack of 4 spacers can be used to mount an add-on-board to the Raspberry Pi board. Dimensions: 2 × 0.5 × 0.5 cm Diameter: M2.5 Weight: 2 g

Notify Me

UPS PIco – Uninterruptible Power Supply & I2C Control HAT

$34.95

If it's not in stock check out this alternative product. The UPS PIco HV3.0B Stack 450 is an advanced uninterruptible power supply for the Raspberry Pi A+/B+/2/3, that adds a wealth of innovative power back-up functionality and...

Notify Me

Pimoroni Pibow Coupé for Raspberry Pi (Model 2, 3B, 3B+)

$8.95 $10.95

Pibow Coupé. The slim, hackable, and attractive case for the Raspberry Pi! FEATURES Compatible with Raspberry Pi 3 B+, 3, and 2 Extra venting, and a place for installing a heatsink if you really want to push your Pi Super-slimline...

Notify Me

Brass 12mm Standoff Set for Pi HATs – Pack of 4

$3.45

We tried several standoff kits before we chose this high quality set as our go-to. The metal hardware threads together cleanly, and the tall standoffs and nuts can be easily attached with your fingers, and then optionally tightened with tools. This 12mm...

Add to Cart

ModMyPi Modular RPi B+ Case – SD Card Cover (Black)

$1.75

The Modular Raspberry Pi Case is designed to be fully customisable by the user, and adaptable to suit a range of requirements. The streamlined look, and adaptability makes it perfect for many applications, including: the hobbyist maker, digital...

Add to Cart

RasClock – Raspberry Pi Real Time Clock Module

$15.95

RasClock is a highly accurate real-time clock that fits on a Raspberry Pi and includes a battery backup. Now available to purchase! RasClock uses one of the following chips: NXP PCF2127AT NXP PCF2127T NXP PCF2129AT NXP PCF2129T All of these...

Notify Me

Wireless-N 300Mbps USB WiFi Adapter – HX9500

$8.95

WARNING: This adapter requires installation of a third-party driver. Although it is relatively simple, PLEASE READ THE INSTALLATION INSTRUCTIONS and ensure you are comfortable following them before buying this adapter. Update the driver source from...

Add to Cart

Lithium Ion Polymer Battery – 3.7v 2000mAh

$9.95

Cylindrical lithium ion battery with JST connector. The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut out when completely dead at 2.5V. However, even...

Notify Me

Lithium Ion Polymer Battery – 3.7v 500mAh

$8.95

Lithium ion polymer (also known as ‘lipo’ or ‘lipoly’) batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 500mAh for a total of about 1.9 Wh. The batteries come pre-attached...

Notify Me

Lithium Ion Battery Pack – 3.7V 6600mAh

$24.45

Need a massive battery for your project? This lithium ion pack is made of 3 balanced 2200mAh cells for a total of 6600mA capacity! The cells are connected in parallel and spot-welded to a protection circuit that provides over-voltage, under-voltage and...

Notify Me

FLIRC – RPi USB XBMC IR Remote Receiver

$22.95

This is the NEW version of FLIRC. Learn more here. Flirc is a small USB device that plugs into your computer and pairs with your same television remote, or any remote that you want to use. It’s basically a universal IR receiver. The best part...

Add to Cart

JustBoom DAC – High Resolution Digital-to-Analogue Converter

$15.95 $35.00

Connect your JustBoom DAC to a set of powered speakers, headphones or an audio amplifier and you can be up and running quickly, enjoying flawless, crystal-clear high quality audio playback within minutes of unboxing. If you need amplification or...

Notify Me

JustBoom Amp – High Resolution Stereo Audio Amplifier

$19.95 $59.95

The JustBoom Amp provides a 2x55W (peak) amplified stereo output. Just connect your JustBoom Amp to a set of passive speakers and you can be up and running quickly. Enjoy flawless high quality audio playback within minutes of unboxing. Includes an...

Notify Me

ModMyPi Modular RPi B+/2/3 Case – Black

$9.95

New Updated Version – Compatible with both Raspberry Pi 2 and 3 with Dual Light Pipes! The ModMyPi Modular Raspberry Pi case! The new ModMyPi deluxe Raspberry Pi 2/3 Model B case is a fully customisable and adaptable modular unit aimed...

Add to Cart

MCP3008 - 8-Channel 10-Bit ADC With SPI Interface

$4.50

Need to add analog inputs? This chip will add 8 channels of 10-bit analog input to your microcontroller or microcomputer project. It's super easy to use, and uses SPI so only 4 pins are required. We chose this chip as a great accompaniment to the...

Notify Me