Categories - PiShop.us

Sub Categories

Official Raspberry Pi 3 B Case, Black, Grey

$7.95

Official Raspberry Pi 3 Case - Black/Grey The official Raspberry Pi case for the Raspberry Pi 3 Model B and the new Raspberry Pi 3 Model B+ is available in both red/white and black/grey colour combinations. Features Easy snap-fit...

Notify Me

DS18B20 Digital Temperature Sensor for Arduino

$1.95

DS18B20 sensor This is a digital temperature sensor that can be used with any Arduino board. It measures temperatures from -55°C to +125°C and outputs a digital signal that can be read using one of the digital pins on the Arduino. The...

Notify Me

Generic Super Bright Blue 5mm LED pack of 25.

Super Bright Blue 5mm LED (25 pack)

$6.95

Need some really bright LEDs? We are big fans of these clear blue LEDs, in fact, we use them exclusively in our kits. They are very bright and have about a 20-degree LED beam. They go easily into a breadboard and will add that extra zing to your project...

Add to Cart

USB audio adapter for Raspberry Pi 5 and Pi 4, compact USB sound device

USB Audio Adapter – Works with Raspberry Pi

$4.95

The USB Audio Adapter – Works with Raspberry Pi delivers cleaner, louder sound than the Pi’s onboard audio. Its compact design leaves the second USB port free. Fully compatible with Raspberry Pi 5 and earlier models. The Raspberry Pi has an...

Add to Cart

Tactile Button Switch (6mm) - 20 Pack

$2.55

Little clicky switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderless breadboard. The pins are normally open (disconnected) and when the button is pressed, they are momentarily closed. They...

Add to Cart

Passive Buzzer

$0.95

A passive buzzer emits a tone when a voltage is applied across it. It also requires a specific signal to generate a variety of tones. Specifications Rated Voltage: DC 5V; Working Voltage: 6-24VDC Resonance Frequency: 2.8 +/- 0.5KHz; Sound Pressure:...

Add to Cart

SUPER Bright Red 5mm LED

$0.95

The Super Bright Red 5 mm LED delivers a crisp, narrow beam of bright red light. With a 640 nm wavelength, 1.8–2.2 V forward voltage, and about 20 mA current draw, it produces around 1500 mcd brightness. Compact and clear-cased, this LED is ideal...

Add to Cart

Short Crust Plus – the perfect base for your Raspberry Pi Pi2/3 - White Base

$12.45

Caution! This case is NOT compatible with the newest Pi 3B+ board that was released March 2018 Short Crust Plus is the new version of the Short Crust Case designed specifically for the Raspberry Pi Model B+ (will also work with the Model A+). As with...

Notify Me

US-100 Ultrasonic Sensor With Temperature Compensation Range

$5.95

Product Name : Ultrasonic Sensor Module;Chip : US-100;Fit for : MCU Pins Number : 5;Working Voltage : 2.4-5.5V;Current : 2mA Detection Range : 2-450cm;Detection Accuracy : 0.3cm+1%;Working Temperature : -20- +70C Borad PCB Size : 45 x 20 x 1...

Add to Cart

Female to Female Jumper Cable x 40 (20cm)

$2.95

40PCS Dupont Wire Color Jumper Cable，2.54mm Female to Female For Arduino

Add to Cart

USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi

$9.95

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36" cable are four wire - red power, black ground, white...

Notify Me

Inductive Proximity Sensor Switch - LJ12A3-4-Z/BX

$3.95

DC 6-36V NPN 3-wire 8mm Inductive Proximity Sensor Switch Detector - LJ12A3-4-Z/BX Features Metal shell, DC type, 8mm detecting distance, 3 wire system. Power supply inverted connecting protection, short circuit protection, non-contact...

Notify Me

5x7cm DIY Prototype Paper PCB

$0.75

Description: High quality general purpose PCB. Material: Single Side Copper PCB. Hole Dia: about 1mm. Hole pitch: standard 2.54mm. For point to point DIY soldering. Size:5cm x 7cm - 1.97inch x 2.76inch. Quantity: 1PC Package Included : 1 X PCB Board

Add to Cart

2-Channel Relay Module for Arduino & Raspberry Pi - 5V

$4.45

This is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP,...

Add to Cart

Pro Micro Compatible Board - 5V/16MHz

$7.95 $9.95

The Pro Micro is an Arduino-compatible microcontroller. It is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface. This...

Notify Me

8-Channel Relay Module for Arduino & Raspberry Pi - 5V

$6.95

This is a 5V 8-Channel Relay interface board able to control various appliances, and other equipment with large currents. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino,etc.). Features 5V 8-Channel Relay interface board,...

Notify Me

PiTFT Plus 480×320 3.5″ TFT+Touchscreen for Raspberry Pi A+/B+/2/3

$39.95

Is this not the cutest, little display for the Raspberry Pi? It features a 3.5″ display with 480×320 16-bit color pixels and a resistive touch overlay just like our popular original, but this one is engineered specifically to work...

Notify Me

Full sized breadboard – 830 points

$6.45

This is a ‘full-size’ breadboard, 830 tie points. Good for small and medium projects. It’s 2.2″ x 7″ (5.5 cm x 17 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails...

Add to Cart

Assembled Pi T-Cobbler Plus – GPIO Breakout for A+/B+/Pi2/Pi3/Zero

$7.95

The Raspberry Pi B+ / Pi 2 / Pi 3 / Pi 4 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably...

Add to Cart