Categories - PiShop.us

Sub Categories

Half-size 400-Pin DIY Breadboard, White

$5.45

This is a cute half-size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to make the breadboard as thin as 1.4"...

Add to Cart

Mini Remote Control

$3.95 $4.95

This little remote control would be handy for controlling a robot or other project from across the room. It has 21 buttons and a layout we thought was handy: directional buttons and number entry buttons. The remote uses the NEC encoding type and sends...

Add to Cart

BitScope Blade Uno PI

$39.95 $49.95

Uno Pi is a BitScope Blade designed to power and mount one Raspberry Pi and optional HAT. Uno Pi can also power and mount the Raspberry Pi Display. It's perfect for building industrial strength stand-alone physical computing solutions...

Add to Cart

BitScope Blade Duo Pi

$49.95 $59.95

Duo Pi is a BitScope Blade which can power and mount a pair of Raspberry Pi. It can also be used to power and mount the Raspberry Pi Display. It's perfect for building small dual processing redundant servers or stand-alone client/server...

Notify Me

BitScope Blade Quattro Pi - EOL

$69.95

This model of Quattro Pi is not fully compatible with the new Pi 4 boards due to power requirements. The Uno, Duo, and Blade Rack 40 are Pi 4 compatible, and and new version of the Quattro will soon support Pi 4. Quattro Pi is a BitScope...

Notify Me

Bitscope Micro PC Based Oscilloscope, 2+16CH, 20MHZ, 40MSPS

$129.95 $144.95

Bandwidth: 20MHz Input Impedance: 1Mohm Kit Contents: One Set of 10 Test Leads with Grabber Clips, Pair of Color Coded Analog Shorting Plugs, Connection Key Card Plug Type: USB Product Range: BITSCOPE - BS Series SVHC: To Be Advised Sampling...

Notify Me

Socket To External Driver Conversion Board

$3.95 $4.95

Socket to External Drivers converter board. It plugs into a Pololu stepper driver socket and re-routs the Step,Direction,Enable,Ground pins to the stepper motor ports connector. Forum discussion on external drivers for the Raspberry Pi CNC Hat: Using...

Add to Cart

Pi Zero USB Stem

$6.95

The Zero Stem is a PCB shim that turns a Raspberry Pi Zero into a USB dongle. Once the shim is installed, your Raspberry Pi can be plugged directly into a computer or USB hub without any additional cables or power supplies. The Zero Stem is compatible...

Add to Cart

Camera Cable Joiner/Extender for Raspberry Pi

$3.50

The Raspberry Pi camera module comes with its own 30cm cable to connect to the Pi, but sometimes that’s simply not long enough. This lovely little board lets you add extension cables to your existing camera cable, giving you as much range as...

Add to Cart

Acrylic case for MiniBoss

$7.95 $14.95

Please note that due to supply shortages the acyrlic case stock for this product is now solid black instead of transparent black as shown in the product images. Acrylic Case for miniBOSS For RPi Zero! IMPORTANT - Each acrylic case piece is covered...

Notify Me

Pimoroni Picade - BYO Screen

$99.95 $154.95

Right from our attic, the legendary Pimoroni Picade - BYO Screen, Brand NEW, sealed in its packaging - ONLY COMPATIBLE WITH RPi 3 or RPi 3B+ THIS KIT CONTAINS NO SCREEN. GO HERE FOR THE KIT WITH 8" SCREEN. The Picade comes in kit form...

Add to Cart

BitScope Blade Rack

$199.95 $225.95

Make sure to check all of our cool BitScope products! The BitScope Blade Rack is a 1RU server built with Quattro Pi. It is populated with up to four Raspberry Pi and includes a built-in five port network switch. BR04A is...

Notify Me

Butterfly PCB

$2.95

Allows two HAT or pHAT (or a mix) to be attached to a single Raspberry Pi 40-pin header. All pins are connected *except* ID_SD and ID_SC (HAT EEPROM), which have solder jumpers – this allows HATs which follow the specification correctly...

Add to Cart

Raspberry Pi Camera case Black - For Pi Camera V2

$3.45 $4.45

CAUTION! This case is NOT compatible with the new Raspberry Pi Camera V3 modules.This is an elegant and innovative protective case designed specifically for the Raspberry Pi Camera. The case is a two-piece injection-moulded ABS enclosure that snaps...

Notify Me

Cluster HAT Kit (includes 4 x Raspberry Pi Zero W)

$132.95 $140.70

The Cluster HAT is the perfect tool for modelling, testing and teaching small scale clusters. The Cluster HAT is designed to interface a controller (Raspberry Pi A+/B+/2/3/4) with 4 Raspberry Pi Zero's configured to use USB gadget mode.This Kit...

Choose Options

Sleepy Pi 2 - MicroUSB

$54.95

Oops! This product has been discontinued This item is no longer available, or PiShop can’t offer it anymore. Don’t worry, there are plenty of other great tools, boards, and accessories waiting for you. If you’re looking for an...

Notify Me

BeoCreate 4-Channel Amplifier

$199.95

The Beocreate is a joint project between audio legends Bang & Olufsen and HiFiBerry. It is a very flexible 4-Channel DSP/DAC/amplifier combination board designed for high-quality music playback in combination with passive...

Add to Cart

Cluster HAT v2.5

$37.95

Cluster Hat Version 2.5 by 8086 Consultancy The Cluster HAT interfaces a (Controller) Raspberry Pi A+/B+/2/3/4 with up to 4 Raspberry Pi Zeros (1.1/1.2 or W) configured to use USB Gadget mode, and is an ideal tool for teaching or testing small-scale...

Choose Options

Brass Standoffs, M2.5 x 15mm, Package of 4

$3.45

Brass standoff kits ideal for Raspberry Pi, Arduino, and other electronics. These are ideal for Alchemy Power products such as Pi-EzConnect, Pi-16ADC, Pi-BB, and Pi-UpTime. Contents Eight brass M2.5 15mm x 6mm hex...

Add to Cart

UniPiCase - Zero Standard

$9.95

The UniPiCase is a secure, feature-rich case made to the best design and fabrication standards. This is our own case design, and it is manufactured here in Canada! Please note, this case is not compatible with the Zero WH. Only Tall versions of the case...

Add to Cart