Categories - PiShop.us

Sub Categories

Tactile Button Switch (6mm) - 20 Pack

$2.55

Little clicky switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderless breadboard. The pins are normally open (disconnected) and when the button is pressed they are momentarily closed. They...

Add to Cart

Passive Buzzer

$0.95

A passive buzzer emits a tone when a voltage is applied across it. It also requires a specific signal to generate a variety of tones. Specifications Rated Voltage: DC 5V; Working Voltage: 6-24VDC Resonance Frequency: 2.8 +/- 0.5KHz; Sound Pressure:...

Add to Cart

SUPER Bright Red 5mm LED

$0.95

These are very bright LEDs. They are so bright that it hurts to look directly at them. Please take a look at the pictures to get an idea of the intensity. The lense is clear, but this model is red. Features 9,000mcd brightness Standard size - T1...

Add to Cart

Short Crust Plus – the perfect base for your Raspberry Pi Pi2/3 - White Base

$12.45

Caution! This case is NOT compatible with the newest Pi 3B+ board that was released March 2018 Short Crust Plus is the new version of the Short Crust Case designed specifically for the Raspberry Pi Model B+ (will also work with the Model A+). As with...

Notify Me

US-100 Ultrasonic Sensor With Temperature Compensation Range

$5.95

Product Name : Ultrasonic Sensor Module;Chip : US-100;Fit for : MCU Pins Number : 5;Working Voltage : 2.4-5.5V;Current : 2mA Detection Range : 2-450cm;Detection Accuracy : 0.3cm+1%;Working Temperature : -20- +70C Borad PCB Size : 45 x 20 x 1...

Add to Cart

Female to Female Jumper Cable x 40 (20cm)

$2.95

40PCS Dupont Wire Color Jumper Cable，2.54mm Female to Female For Arduino

Add to Cart

USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi

$9.95

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36" cable are four wire - red power, black ground, white...

Notify Me

Inductive Proximity Sensor Switch - LJ12A3-4-Z/BX

$3.95

DC 6-36V NPN 3-wire 8mm Inductive Proximity Sensor Switch Detector - LJ12A3-4-Z/BX Features Metal shell, DC type, 8mm detecting distance, 3 wire system. Power supply inverted connecting protection, short circuit protection, non-contact...

Notify Me

5x7cm DIY Prototype Paper PCB

$0.75

Description: High quality general purpose PCB. Material: Single Side Copper PCB. Hole Dia: about 1mm. Hole pitch: standard 2.54mm. For point to point DIY soldering. Size:5cm x 7cm - 1.97inch x 2.76inch. Quantity: 1PC Package Included : 1 X PCB Board

Add to Cart

2-Channel Relay Module for Arduino & Raspberry Pi - 5V

$4.45

This is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP,...

Add to Cart

Pro Micro Compatible Board - 5V/16MHz

$7.95 $9.95

The Pro Micro is an Arduino-compatible microcontroller. It is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface. This...

Add to Cart

8-Channel Relay Module for Arduino & Raspberry Pi - 5V

$6.95

This is a 5V 8-Channel Relay interface board able to control various appliances, and other equipment with large currents. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino,etc.). Features 5V 8-Channel Relay interface board,...

Add to Cart

PiTFT Plus 480×320 3.5″ TFT+Touchscreen for Raspberry Pi A+/B+/2/3

$39.95

Is this not the cutest, little display for the Raspberry Pi? It features a 3.5″ display with 480×320 16-bit color pixels and a resistive touch overlay just like our popular original, but this one is engineered specifically to work...

Notify Me

Full sized breadboard – 830 points

$6.45

This is a ‘full-size’ breadboard, 830 tie points. Good for small and medium projects. It’s 2.2″ x 7″ (5.5 cm x 17 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails...

Add to Cart

Assembled Pi T-Cobbler Plus – GPIO Breakout for A+/B+/Pi2/Pi3/Zero

$7.95

The Raspberry Pi B+ / Pi 2 / Pi 3 / Pi 4 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably...

Add to Cart

Nylon 12mm M2.5 Standoff Set – Pack of 4

$1.45

Nylon Standoffs - M2.5x12mm - Pack of 4 - Black

Add to Cart

SNES Retro Game Controller – USB

$7.95

Play your computer games with an old-school / Retro-feel! This USB controller allows you to play your favorite PC games by just plugging in your USB control! It’s that simple! Just Plug n’ Play no extra drivers needed! The super 16-bit...

Add to Cart

Nylon 11mm Standoff Set – Pack of 4

$1.45

This pack of 4 spacers can be used to mount an add-on-board to the Raspberry Pi board. Dimensions: 2 × 0.5 × 0.5 cm Diameter: M2.5 Weight: 2 g

Notify Me

UPS PIco – Uninterruptible Power Supply & I2C Control HAT

$34.95

If it's not in stock check out this alternative product. The UPS PIco HV3.0B Stack 450 is an advanced uninterruptible power supply for the Raspberry Pi A+/B+/2/3, that adds a wealth of innovative power back-up functionality and...

Notify Me