other

This copper heatsink set for Raspberry Pi 5 gives strong passive cooling. The four-piece pack includes sizes tailored for CPU, RAM, I/O, and Ethernet chips. The thin profile fits in most Pi 5...

Low Voltage Labs - Pi Traffic Light for The Raspberry PiThe Pi-Traffic light provides a fun and easy way to add three 10mm LEDs to your Raspberry Pi project. The red, yellow and green LEDs give...

This economy breadboard wiring kit contains 140 pcs of cut and preformed jumper wires in a plastic reusable storage box. These wiring kits are ideal for use with any breadboard. Each jumper has...

Specifications Material: Brass + Stainless steel; rust resistant, practical, and durable  M2.5 hex Brass spacers: female to female brass spacers have 4 sizes of 6 mm, 10 mm, 15 mm, 20 mm,...

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on...

Specifications Rainbow flat cable: IDC 40pin Male to Female Ribbon Cables Kit flat GPIO Cable Length: about 20 cm / 8 inch Material: High-quantity copper soft wire material for safe and...

Raspberry Pi Dual-Band 5GHz / 2.4GHz USB Wi-Fi Adapter with Antenna If the on-board Wi-Fi on your Raspberry Pi isn't giving you enough range, this dual-band 2.4GHz/5GHz USB 2.0 Wi-Fi adapter is a...

SATA SSD to USB Adapter - Works with Raspberry Pi 5 & Pi 4 Need more gigabytes on your Pi? Connect a SATA SSD to your Raspberry Pi board with this compact, high-performance USB 3.0 to...

A complete toolkit with several components - Perfect to build, code, and play with your Raspberry Pi board! Compatibility Raspberry Pi 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero (sold...

Hey want to hear a really loud noise? Apply 3V to 5V to this buzzer module and you'll be rewarded with a loud 2KHz BEEEEEEEEEEEEEEEEEP. Unlike a plain piezo, this buzzer does not need an AC...

This large (40x30x5mm) heatsink will let you eek out some extra thermal performance from power-hungry tasks. This XL heatsink is specifically designed for the Raspberry Pi 4. It will also fit...

Features Set of 3 Aluminum heat sinks Compatible with the Raspberry Pi 4 Model B board 3M 8810 adhesive thermal tape on the back Can be used with any other devices  Reduce chip hot-spots...

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either ‘classic‘ or ‘NoIR‘ type) for a different size. Works great, just carefully...

This is a 5V 4-Channel Relay interface board. Be able to control various appliances, and other equipment with large currents. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino,...

This is a 5V 8-Channel Relay interface board able to control various appliances, and other equipment with large currents. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino,etc...

This is a cute half-size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power...

The Zero Stem is a PCB shim that turns a Raspberry Pi Zero into a USB dongle. Once the shim is installed, your Raspberry Pi can be plugged directly into a computer or USB hub without any additional...

Brass standoff kits ideal for Raspberry Pi, Arduino, and other electronics. These are ideal for Alchemy Power products such as Pi-EzConnect, Pi-16ADC, Pi-BB, and Pi-UpTime...

PRO SIGNAL-RPUSB 1M-COMPUTER CABLE, USB A PLUG TO MICRO USB B PLUG, 1M, BLACK High quality standard A-miniB USB cable, for USB 1.1 or 2.0. Approximately 1M (3ft) long from end to end.

Heatsink 1: Size: 14 x 14 x 6mm Baseboard thickness: 1.0mm Fin thickness: 0.7mm Fin number: 7 pieces Fin space width: 1.5mm Heatsink 2: Size: 9 x 9 x 4mm Baseboard thickness: 1.0mm Fin...