other

About this item Wide Compatibility: M.2 to USB adapter is compatible with various SSD types, including SATA/NGFF and NVMe/PCIe, supporting sizes 2230, 2242, 2260, and 2280 such as M.2 NVMe / SATA...

Power Cord with NEMA 5-15P to IEC 60320 C13 connectors is a versatile solution for connecting various electronic devices in North America. The cord enables you to effortlessly connect devices...

Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! M2.5 size screws fit...

Cat6 Ethernet Patch Cable - Snagless RJ45, UTP, Pure Bare Copper Wire, 24AWG, 5ft, Blue The Cat6 Ethernet Network Patch Cable RJ45, Pure Copper – 5 ft delivers dependable connectivity with...

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 470Ω Resistors. More specifically, they...

Features Convert the HDMI output port to an analog VGA DB-15 connector with this adapter Supports full-size high-definition resolution of 720p or 1080p Can be used with all HDMI output port and...

We tried several standoff kits before we chose this high quality set as our go-to. The metal hardware threads together cleanly, and the tall standoffs and nuts can be easily attached with your...

High quality aluminum heatsink for cooling the Raspberry Pi Zero 2 W's processor. Base with 3M thermal adhesive. Technical Details Dimensions: 14 x 14 x 6 mm Material: Anodized...

This adapter converts a VGA signal for display on an HDMI monitor or PIKVM v4 Support power management Open the big screen vision, high-definition picture quality USB interface provides audio +...

Large Solderless Breadboard - 2250 Tie Points Metal Base For really big projects, give yourself some room to work in, with a massive 2250-point breadboard - equivalent in size to three full-sized...

To celebrate the 30th Anniversary of the invention of MIDI we're carrying these handy 5-pin MIDI jacks. They're what you see on the back of nearly every synthesizer and drum machine. These are nice...

Plug the T-Cobbler into your breadboard (it has pins on the underside), and connect it to your Pi's GPIO header using the included cable, and you're ready to prototype with ease!

Need some indicators? We are big fans of these diffused red LEDs, as featured in the LoL shield. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a...

USB Type-C to USB 3.0 A-Male Cable - 1FT (30cm) - Black This USB-C to USB 3.0 cable lets you connect and charge your USB-C devices (hard drive, mobile, etc...) to a USB Type-A port on a computer,...

Totaling 420 pieces, this White Nylon M2.5 Screw Set is a must-have for your workstation. You'll have more than enough screws, nuts, and hex standoffs to construct your maker projects for days on...

Raspberry Pi Pico is not included! Assembly (soldering) required. Got a new Raspberry Pi Pico? Great! If you want to hook up components, sensors or any other fun stuff to the GPIO, you're going to...

Raspberry Pi Pico is not included! Assembly (soldering) required. Got a new Raspberry Pi Pico? Great! If you want to hook up components, sensors or any other fun stuff to the GPIO, you're going to...

Right Angle USB cable - A/MicroB This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0, but with a twist! Literally! Instead of the cable coming straight out from the connector,...

Need some really bright LEDs? We are big fans of these white LEDs. They are very bright and have about 20degree LED beam. They go easily into a breadboard and will add that extra zing to your project...

Lightweight, compact, and flexible. This tripod is perfect for any small camera. You can wrap it around objects or stand it up on its own. The pivoting ball head allows a good range of motion and...