other

If you plan on connecting a cable to the GPIO connector, you might need a GPIO Stacking Header for Pi - Extra-long 2x20 Pins An armor aluminum alloy case with dual cooling fan designed for...

Cell Type Cylindrical LiCoO2 battery Nominal Voltage 3.7V Nominal Capacity 2200mAh Cycle Life >300times Discharge Cut-off...

Need some really bright LEDs? We are big fans of these clear red LEDs, in fact we use them exclusively in our kits. They are very bright and have about 20degree LED beam. They go easily into a...

A complete toolkit with several components - Perfect to build, code, and play with your Raspberry Pi board! Compatibility Raspberry Pi 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero (sold...

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on...

Hey want to hear a really loud noise? Apply 3V to 5V to this buzzer module and you'll be rewarded with a loud 2KHz BEEEEEEEEEEEEEEEEEP. Unlike a plain piezo, this buzzer does not need an AC...

USB-C Type-C USB Raspberry Pi Power Switch for Raspberry Pi 4 Model BOne Switch On/Off Power with Dramatically Reduces Wear and Tear on Sensitive USB-C Connectors. No need to pull the cable to...

This large (40x30x5mm) heatsink will let you eek out some extra thermal performance from power-hungry tasks. This XL heatsink is specifically designed for the Raspberry Pi 4. It will also fit...

Dual Fan for Raspberry Pi delivers effective cooling for Raspberry Pi 4 Model B and Raspberry Pi 3 Model B+ with a compact heatsink topped with two fans. The installation is easy; thermal tape comes...

If you plan on connecting a cable to the GPIO connector, you might need a GPIO Stacking Header for Pi - Extra-long 2x20 Pins An armor aluminum alloy case with dual cooling fan designed for the...

If you plan on connecting a cable to the GPIO connector, you might need a GPIO Stacking Header for Pi - Extra-long 2x20 Pins An armor aluminum alloy case designed for the Raspberry Pi 4B...

Features Set of 3 Aluminum heat sinks Compatible with the Raspberry Pi 4 Model B board 3M 8810 adhesive thermal tape on the back Can be used with any other devices  Reduce chip hot-spots...

USB 2.0 Card Reader T18 is a high-quality micro SD reader and writer. This memory card reader/writer delivers High Speed USB 2.0 data transfer rate up to 480Mbps, supports USB 2.0 plug and play...

DIGITAL LOGGERS - IoT Power Relay II - Enclosed High-power Power Relay for Arduino, Raspberry Pi, PIC or Wifi, Relay Shield, Automatic Say goodbye to hazardous high-voltage wiring and create...

Cell Type Cylindrical LiCoO2 battery Connector Type XHP-2 Connector Lenth 55mm (2-1/8") Nominal Capacity 2200mAh Cycle Life >300times Discharge Cut-off...

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on...

VK-162 USB GPS Navigation Module The VK-162 GPS Receiver is a low-cost high-sensitivity GPS Receiver + Internal Antenna with USB connector. It is a standalone GPS receiver providing a solution with...

A row of 40 angled headers - break to fit. Used with custom PCBs or general custom headers. Specifications Pin pitch: 2.54 mm Length: 100mm (~4") Material: plastic, metal

Operating Voltage : 5V(DC) Static Current: Less than 2mA. Output Signal: Electric frequency signal, high level 5V, low level 0V. Sensor Angle: Not more than 15 degrees Detection Distance:...

High quality aluminum heatsink for cooling the Raspberry Pi Zero's processor. Base with 3M thermal adhesive. Compact and fits into our Unipicase Zero Standard.  Technical...