other

Adhesive thermal layer Keep your Raspberry Pi cool with this heat sink Reduces the risk of hardware failure due to overheating Low profile, will fit into most cases Simple, passive cooling. no...

Multicolored / comes in a 40-pin separable ribbon cable Great for microcontroller experiment

Handy for making wire harnesses or jumpering between headers on PCB's These premium jumper wires are 20cm long and come in a 'strip' of 40 0.1" male header contacts on one end and 0.1" female header...

Continuous beep - Breadboard friendly!

Working voltage: DC5V-20V Quiescent Current: 65uA Level Output Voltage: High 3V / Low 0V Delaying time: 0.3~18s (adjustable) Blockade Time: 0.2s Trigger Method: L: unrepeatable trigger / H:...

If this is out of stock, please consider this alternative product. Specifications: Chip: DS18B20; Voltage: 3.0~5.5V Temperature range: -55'C~+125'C (-67'F~+257'F) Output wires: Red(VCC),...

This is a cute half-size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power...

The Zero Stem is a PCB shim that turns a Raspberry Pi Zero into a USB dongle. Once the shim is installed, your Raspberry Pi can be plugged directly into a computer or USB hub without any additional...

Brass standoff kits ideal for Raspberry Pi, Arduino, and other electronics. These are ideal for Alchemy Power products such as Pi-EzConnect, Pi-16ADC, Pi-BB, and Pi-UpTime...

PRO SIGNAL-RPUSB 1M-COMPUTER CABLE, USB A PLUG TO MICRO USB B PLUG, 1M, BLACK High quality standard A-miniB USB cable, for USB 1.1 or 2.0. Approximately 1M (3ft) long from end to end.

Heatsink 1: Size: 14 x 14 x 6mm Baseboard thickness: 1.0mm Fin thickness: 0.7mm Fin number: 7 pieces Fin space width: 1.5mm Heatsink 2: Size: 9 x 9 x 4mm Baseboard thickness: 1.0mm Fin...

Details: Can be also used to space circuit boards, panels, doors or gears Also known as standoff separator Dimensions : Depth = 5mm Height = 18mm Width = 5mm Weight = 1.4g Thread size...

The best one we have. Offers the best coverage and high data transfer speed. Works with Raspbian/OpenELEC “out of the box”. Chipset: Realtek 8192CU (HX9700) WiFi: 2.4Ghz IEEE802...

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 900mAh for a...

Cell dimensions: 52 x 34 x 6.0mm

This inexpensive USB to RS232 cable works well for Linux and Windows 7 environments, but is not currently functioning with Windows 10. Suitable for link download Simple and easy way to give...

Please Note: The Raspberry Pi Zero is NOT included in this product! This camera cable is specifically designed to work with the Raspberry Pi Zero - Version 1.3! Just plug it into your Pi Zero's...

This USB to Micro USB Cable with switch is 1.5m long and is the perfect hard on/off power switch for your Raspberr yPi. This cable can be using in conjunction with a USB mains charger such...

A 50cm USB to Micro USB Cable.

Depending on the batch we received, this module can be DS3231 or DS3231M. The DS3231 is a low-cost, extremely accurate I2C realtime clock (RTC) with an integrated...