other

VK-162 USB GPS Navigation Module The VK-162 GPS Receiver is a low-cost high-sensitivity GPS Receiver + Internal Antenna with USB connector. It is a standalone GPS receiver providing a solution with...

A row of 40 angled headers - break to fit. Used with custom PCBs or general custom headers. Specifications Pin pitch: 2.54 mm Length: 100mm (~4") Material: plastic, metal

Operating Voltage : 5V(DC) Static Current: Less than 2mA. Output Signal: Electric frequency signal, high level 5V, low level 0V. Sensor Angle: Not more than 15 degrees Detection Distance:...

High quality aluminum heatsink for cooling the Raspberry Pi Zero's processor. Base with 3M thermal adhesive. Compact and fits into our Unipicase Zero Standard.  Technical...

USB flat “noodle” cables – a standard A to micro-B USB cable, for USB 1.1 or 2.0 – but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data...

USB flat “noodle” cables – a standard A to micro-B USB cable, for USB 1.1 or 2.0 – but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data...

USB flat “noodle” cables – a standard A to micro-B USB cable, for USB 1.1 or 2.0 – but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data...

USB flat “noodle” cables – a standard A to micro-B USB cable, for USB 1.1 or 2.0 – but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data...

USB flat “noodle” cables – a standard A to micro-B USB cable, for USB 1.1 or 2.0 – but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data...

USB flat “noodle” cables – a standard A to micro-B USB cable, for USB 1.1 or 2.0 – but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data...

A 4-Way Riser perfect to use with the Raspberry Pi PoE HAT! SPECIFICATIONS Pitch: 2.54mm Gender of Connector: Female Number of Pins: 2 x 2 Pin Type of Row: Double-Row Body Orientation:...

USB flat “noodle” cables – a standard A to micro-B USB cable, for USB 1.1 or 2.0 – but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data...

Description If the product is out of stock – please consider the alternative product. This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to...

DC 6-36V NPN 3-wire 8mm Inductive Proximity Sensor Switch Detector LJ18A3-8-Z/BY Product Description Metal shell, DC type, 8mm detecting distance, 3 wire system. Power supply inverted...

Bosch has stepped up their game with their new BMP280 sensor.An environmental sensor with temperature.This sensor is great for all sorts of weather sensing and can even be used in both I2C and...

We use these sets of 4 clear rubber feet on our HighPi case, but you'll find other uses for them too!

HDMI Male to Male Flat Cable, Nickel Plated, 0.3 meter Connect two HDMI devices together and save space with this basic flat HDMI 1.4 cable. It has nice molded grips for easy installation, and is 1...

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either ‘classic‘ or ‘NoIR‘ type) for a different size. Works great, just carefully...

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either ‘classic’ or ‘NoIR’ type) for a different size. Works great, just carefully...

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either ‘classic’ or ‘NoIR’ type) for a different size. Works great, just carefully...