Compatible with: Raspberry Pi A+/B+/2B/3B/3B+/4B+/Zero This is HiFiBerry DAC2 Pro with a pair of gold-plated RCA jacks. It can be simply plugged onto your Raspberry Pi, without any soldering. HiFiBerry DAC2 Pro is the sucessor of your popular DAC+ Pro...

What is it? APlusCam is designed in the shape of a Raspberry Pi HAT with mounting holes for a Raspberry Pi Camera and suction cups allowing the camera can look out through a window. The original version of this was a PCB, but I've now updated it to...

The ClusterCTRL Stack (controller and passive backplane) is a simple way to both power and control cooling for a stack of 5 Raspberry Pi. Controller Powered by 12-24V PSU. 20 pin header for Power (2x5V and 2xGND for each Pi). 6 pin header for...

We have two enclosures compatible with this HAT: HighPi Pro Case for IQAudio DAC+ and Raspberry Pi 3 for Raspberry Pi 3, and HighPi Pro Case for IQAudio DAC+ and Raspberry Pi 4 for Raspberry Pi 4. The Pi-DAC PRO, a new breed of...

We have two enclosures compatible with this HAT: HighPi Pro Case for IQAudio DAC+ and Raspberry Pi 3 for Raspberry Pi 3, and HighPi Pro Case for IQAudio DAC+ and Raspberry Pi 4 for Raspberry Pi 4. Raspberry Pi DAC+ is a high-performance...

IQaudio DigiAMP+ - Black PCB - Raspberry PI SC0369 IQaudio DigiAMP+ uses the Texas Instruments TAS5756M PowerDAC to deliver direct connection to PASSIVE stereo speakers at up to 2x35wpc with variable output. Ideal for a Raspberry Pi-based hi-fi...

Please note that due to supply shortages the acyrlic case stock for this product is now solid black instead of transparent black as shown in the product images. This is the VOLT+ With Stepped Attenuator. Includes VOLT+ Amp + Stepped Attenuator + Acrylic...

Waveshare 13890 - 1.3inch OLED Display HAT For Raspberry Pi, 128x64 Pixels, SPI/I2C Interface This is an OLED display HAT for Raspberry Pi, 1.3inch diagonal, 128x64 pixels, with embedded controller, communicating via SPI or I2C interface...

Over one hundred RGB LEDs, all individually-controllable, and four tactile buttons. It's the ultimate pocket-sized rainbow generator for Raspberry Pi! Unicorn HAT Mini is a 17x7 matrix of RGB LEDs that can be controlled, both in terms of...

Waveshare 17372 - 4G/3G/2G/GSM/GPRS/GNSS HAT For Raspberry Pi, Based On SIM7600G-H - SIM7600G-H 4G HAT The SIM7600G-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data...

The I2C multiplexer allows connecting multiple I2C devices with the same address onto a single I2C bus (PCB colour may vary). For each multiplexed output there are 4 pins - data ports SDAx, SCLx GND ground and V for power. The "V" output can be altered...

Waveshare 3965 - RS232 Communication Board, SP3232 On Board, 3V-5.5V, ESD Enhanced, Hardware Flow Control Supported The RS232 Board is used for establishing RS232 communication with devices powered from 3V - 5.5V. It contains SP3232 (RS-232...

Argon Fan HAT for Raspberry Pi 3B/3B+/4B  Features A fan HAT that uses a 40mm cooling fan to prevent overheating on the Raspberry Pi 3 and Raspberry Pi 4. Comes with a power button that can be used to do forced shutdowns, safe shutdowns, and...

Monitor your world with Enviro + Air Quality for Raspberry Pi! There's a whole bunch of fancy environmental sensors on these boards, and a gorgeous little full-colour LCD to display your data. They're the perfect way to get started with citizen science...

Take control of and monitor your world with our ultimate jack-of-all-trades Raspberry Pi HAT! We've pulled together a great set of features into this home monitoring and automation controller. With relays, analog channels, powered...

Our HiFiBerry DAC+ ADC combines HifiBerry's well-know DAC+ with an analogue input. Both input and output support sample rates up to 192kHz. Note that you might need to update your Linux kernel to support the audio input features (at least Raspberry...

Waveshare 14972 - 1.3inch IPS LCD display HAT for Raspberry Pi, 240x240 pixels, SPI interface - 1.3inch LCD HAT Overview This is an IPS LCD display HAT for Raspberry Pi, 1.3inch diagonal, 240x240 pixels, with embedded controller,...

Waveshare 15275 - Servo Driver HAT for Raspberry Pi, 16-Channel, 12-bit, I2C Interface, Straight Pinheader Needless to say, the Raspberry Pi is powerful enough in most cases, yet it's not that good at providing precise PWM output. You may have...

Waveshare 11179 - Raspberry Pi Expansion Board, Miscellaneous Components, All-in-One. Pioneer600 Features Supports Raspberry Pi A+/B+/2B/3B/4B <Standard I/O> dual LED, joystick, buzzer, the basic components <USB TO...

Waveshare 14882 - RS485 CAN HAT for Raspberry Pi, Allows Stable Long-distance Communication The RS485 CAN HAT will enables your Pi to communicate with other devices stably in long-distance via RS485/CAN functions. Features Standard Raspberry Pi...