other

This copper heatsink set for Raspberry Pi 5 gives strong passive cooling. The four-piece pack includes sizes tailored for CPU, RAM, I/O, and Ethernet chips. The thin profile fits in most Pi 5...

This economy breadboard wiring kit contains 140 pcs of cut and preformed jumper wires in a plastic reusable storage box. These wiring kits are ideal for use with any breadboard. Each jumper has...

Specifications Material: Brass + Stainless steel; rust resistant, practical, and durable  M2.5 hex Brass spacers: female to female brass spacers have 4 sizes of 6 mm, 10 mm, 15 mm, 20 mm,...

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on...

Specifications Rainbow flat cable: IDC 40pin Male to Female Ribbon Cables Kit flat GPIO Cable Length: about 20 cm / 8 inch Material: High-quantity copper soft wire material for safe and...

Raspberry Pi Dual-Band 5GHz / 2.4GHz USB Wi-Fi Adapter with Antenna If the on-board Wi-Fi on your Raspberry Pi isn't giving you enough range, this dual-band 2.4GHz/5GHz USB 2.0 Wi-Fi adapter is a...

SATA SSD to USB Adapter - Works with Raspberry Pi 5 & Pi 4 Need more gigabytes on your Pi? Connect a SATA SSD to your Raspberry Pi board with this compact, high-performance USB 3.0 to...

A complete toolkit with several components - Perfect to build, code, and play with your Raspberry Pi board! Compatibility Raspberry Pi 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero (sold...

Hey want to hear a really loud noise? Apply 3V to 5V to this buzzer module and you'll be rewarded with a loud 2KHz BEEEEEEEEEEEEEEEEEP. Unlike a plain piezo, this buzzer does not need an AC...

This large (40x30x5mm) heatsink will let you eek out some extra thermal performance from power-hungry tasks. This XL heatsink is specifically designed for the Raspberry Pi 4. It will also fit...

Features Set of 3 Aluminum heat sinks Compatible with the Raspberry Pi 4 Model B board 3M 8810 adhesive thermal tape on the back Can be used with any other devices  Reduce chip hot-spots...

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either ‘classic‘ or ‘NoIR‘ type) for a different size. Works great, just carefully...

This is a 5V 4-Channel Relay interface board. Be able to control various appliances, and other equipment with large currents. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino,...

This is a cute half-size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power...

The Zero Stem is a PCB shim that turns a Raspberry Pi Zero into a USB dongle. Once the shim is installed, your Raspberry Pi can be plugged directly into a computer or USB hub without any additional...

Brass standoff kits ideal for Raspberry Pi, Arduino, and other electronics. These are ideal for Alchemy Power products such as Pi-EzConnect, Pi-16ADC, Pi-BB, and Pi-UpTime...

Heatsink 1: Size: 14 x 14 x 6mm Baseboard thickness: 1.0mm Fin thickness: 0.7mm Fin number: 7 pieces Fin space width: 1.5mm Heatsink 2: Size: 9 x 9 x 4mm Baseboard thickness: 1.0mm Fin...

Details: Can be also used to space circuit boards, panels, doors or gears Also known as standoff separator Dimensions : Depth = 5mm Height = 18mm Width = 5mm Weight = 1.4g Thread size...

Please Note: The Raspberry Pi Zero is NOT included in this product! This camera cable is specifically designed to work with the Raspberry Pi Zero - Version 1.3! Just plug it into your Pi Zero's...

This USB to Micro USB Cable with switch is 1.5m long and is the perfect hard on/off power switch for your Raspberr yPi. This cable can be using in conjunction with a USB mains charger such...