Pimoroni PIM730 - Add 2.4GHz wireless and Bluetooth functionality to an existing project with this handy breakout featuring Raspberry Pi's RM2 module. RM2 uses the same two-in-one wireless and Bluetooth module that's found on Raspberry Pi Pico...

This high performing LTE Swivel antenna comes with SMA-Male connector.  It is ground plane independent. Specifications Technology: 4G LTE, 3G, 2G Antenna Frequency: 698-960/1710-2170/2500-2700 MHz MHz VSWR: 1.7 :1 Mounting...

RF Interface cable 20 cm SMA/IPEX pigtail with SMA female bulkhead and U.FL connector. For most miniPCIe WWAN modules, RF 1.13 cable. Specs Connector Type: SMA-F, IPEX MHF/U.FL Cable Specification: 1.13 mm coax Cable length: 20...

The SIMCom SIM7600G-H R2 LTE CAT-4 mPCIe is Multi-Band LTE-TDD/LTE-FDD module solution in a mPCIe form factor. SIM7600G-H R2 is a LTE CAT4 module with support of up to 150Mbps downlink data transfer. With abundant application capability like...

USB to LoRa Dongle is a powerful and versatile USB to LoRa that lets you connect beyond boundaries. With its exceptional range and easy connectivity, it allows you to seamlessly communicate with devices up to 5 km away. LoRa Dongle is the perfect...

Introducing PiBeam, the ultimate USB IR Transceiver that revolutionizes the way you control your devices. Designed with convenience and versatility in mind, PiBeam supports all common remote control protocols, making it compatible with a wide range of...

Waveshare 24654 - SX1262 LoRaWAN Node Module Expansion Board For Raspberry Pi, With Magnetic CB Antenna, GNSS Function - SX1262 868/915M LoRaWAN/GNSS HAT Features This series of products are LoRa modules using the new generation of...

These Simple RF receivers are the easiest way possible to add wireless control, painlessly! There's no programming, configuring or addressing - simply power the receiver with ~5 VDC and press the buttons on your RF keyfob remote. When the A button is...

The Challenger RP2040 SubGHz board is an Arduino/Circuitpython compatible Adafruit Feather format micro controller board based on the Raspberry Pico (RP2040) chip. We wanted to start playing around with ultra wide band (UWB) radios and positioning so we...

Please note that this is a kit consisting of both the Challenger RP2040 NFC board and a 13.56MHz NFC Antenna. The Challenger RP2040 NFC is a small embedded computer, equipped with an advanced on-board NFC controller (NXP PN7150), in the popular Adafruit...

This antenna is perfect for use together with our Lora as well as our SubGHz boards. It is a 43.5mm by 20mm flex PCB antenna with double sided tape on the backside making it perfect for mounting inside of an enclosure. It has been designed specifically...

This is a 170mm long 915MHz 50ohm antenna kit targeted for use with our LoRa and SubGHz products. The antenna can tilt and swivel making it easy to install it in various applications. The kit also comes with a RF cable assembly containing an SMA...

The Challenger RP2040 SubGHz board is an Arduino/Circuitpython compatible Adafruit Feather format micro controller board based on the Raspberry Pico (RP2040) chip. This is a spin-off from our Challenger RP2040 LoRa board but in this case we replaced the...

The Challenger RP2040 LoRa is an Arduino/Circuitpython compatible Adafruit Feather format micro controller board based on the Raspberry Pico (RP2040) chip. This is a spin-off from our Challenger RP2040 WiFi board but we have replaced the WiFi module...

Let your project know its place in the world with this tiny but ultra-sensitive global positioning breakout! This I2C breakout houses a PA1010D GPS receiver module with inbuilt ceramic antenna, which will let you extract date and time, latitude,...

Includes 2x DF13 6-pin to 2.54 mm female jumpers for UART and ADC ports 1x DF13 4-pin to 2.54 mm female jumpers for I2C port Wire length: 200 mm

Supports LiPo batteries up to 6S Max current sensing: 60 A* Switching regulator output: 5.3 V 2.25 A 6-pos DF13 cable for connection to Navio2 power port *power module can sense current up to 90A if different connectors are used (XT60 connectors...

This antenna is NOT compatible with NEO-6T USB dongle. Benefits Superior multipath signal rejection Great out-of-band signal rejection Excellent signal-to-noise ratio Consistent response in all op. temperatures Specifications Antenna type:...

Autopilot HAT for Raspberry Pi powered by ArduPilot and ROS Turn your Raspberry Pi® into a drone controller by using the might of sensors and controllers on board. Currently supported boards​ ArduPilot on Navio2 works on: Raspberry Pi 4 Model...

LoRa™ HAT, a low-power consumption data transmission module, comes with an onboard CH340 USB TO UART converter, Voltage Level Translator(74HC125V), E22-900T22S and E22-400T22S SMA antenna connector, IPEX antenna connector, LoRa™ Spread...