PiShop UPS HAT for Raspberry Pi - Our own uninterruptible power source for Raspberry Pi 3 & 4! The PiShop UPS HAT is powerful enough to continuously deliver 3 Amps of current to the Raspberry Pi, with an Ultra lower power STM32 controller to...

Waveshare 19739 - UPS HAT (C) For Raspberry Pi Zero, 5V Uninterruptible Power Supply, Multi Battery Protection Circuits - UPS HAT (C) SAFETY CAUTIONS Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury,...

Waveshare 23884 - Uninterruptible Power Supply (UPS) Module, Supports Charging And Power Output At The Same Time, 3S & 5V 5A Output - UPS Module 3S (EN) This Uninterruptable Power Supply (UPS) module takes three 18650 lithium-ion...

Tiny-UPS 3.0 – New & Improved - A tiny sized UPS for USB devices Tiny-UPS provides UPS for 5V USB or other power via an external Li-Polymer or Li-Ion battery (batteries are not included). Size and capacity of the battery does not matter...

Waveshare 20567 - UPS HAT (B) For Raspberry Pi, 5V Uninterruptible Power Supply, 5A High Current, Pogo Pins Connector Features Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc. I2C bus communication, monitoring the...

Pi-UpTime UPS 2.0 is a new and improved version of the Pi-UpTime UPS. (See a comparison chart between the original and the updated version 2.0) The Pi-UpTime UPS 2.0 is designed to work with the Pi-4 or other SBC’s, such as Odroid, Asus, Arduino...

Waveshare 19694 - UPS Module For Raspberry Pi Pico Family, Uninterruptible Power Supply - Pico-UPS-A-EN Raspberry Pi Pico and Li-ion battery are NOT included. SAFETY CAUTIONS Li-ion and Li-po batteries are quite unstable. They may cause fire,...

Guaranteed reboot after shutdown. After a soft shutdown, the power on a Raspberry Pi needs to be toggled to reboot. This is done by pulling the USB power source out or installing an on/off switch. This becomes an issue when a Raspberry Pi is deployed...

A Raspberry Pi Zero and Pi Zero W (abbreviated here as PiZ) is a small size computer tethered to the wall power outlet. It needs the power via the micro-USB cable to operate. When PiZ needs to be moved from one location...

Pi Modules PM_039 - PIco Double Li-Ion 18650 Battery Holder - Double 18650 batteries Holder for UPS Pico HV3.0A/B/B+ HATs Designed Especially for the Raspberry Pi® models B, B+ The PIco Double Li-Ion 18650 Battery Holder is...

Pi Modules - UPS PIco HV3.0B+ HAT Top-End 450 - PM_072  The UPS PIco HV3.0B+ HAT Top-End 450 is an advanced Intelligent Mobile Power Bank and Uninterruptible Power Supply especially designed for...

Pi Module - PIco Fan Kit HV3.0 - PM_007 - w/ Fan, Mounting screws, Temperature sensor, Spacers & Connector Note: This kit requires assembly and soldering. Each PIco Fan Kit need to be installed on UPS PIco by soldering of few...

External Arduino Programming Cable lets you use a PC or Mac to develop Sleepy Pi Apps Compatible with Sleepy Pi 1 and Sleepy Pi 2 Do I need this cable? No. You can develop code, debug and program the Sleepy Pi or Sleepy Pi 2 from...

External Programming Cable OR RPi Serial Console Do I need this cable? No. You can develop code, debug and program the Sleepy Pi or Sleepy Pi 2 from your Raspberry Pi quite happily… …But there are times when you...

Pi Modules - UPS PIco HV3.0B+ HAT Stack 450 PoE - PM_073 Note: This product requires soldering. The Raspberry Pi PoE HAT is NOT included and needs to be ordered separately. The UPS PIco HV3.0B+ HAT Stack 450 PoE is an...