HiFiBerry DSP Add-On Board - 4260439550743This DSP add-on board adds digital signal processing capabilities to the following HiFiBerry sound cards: DAC2 HD DAC2 Pro DAC2 ADC Pro Digi2 Pro & Digi2 Pro Rev2.2 Amp 100 Have a look...

The HiFiBerry DAC2 ADC Pro is a high-resolution digital-to-analog and analog-to-digital converter for the Raspberry Pi (newer models with 40 pin GPIO connector). This is a special sound card for the Raspberry Pi, optimised for one specific use case: the...

This new Digi2 is a revised version of the Digi+ model which is compatible with both the Pi4 rev. 1.5 and backwards. The new design features a second GPIO header that accommodates our add-on boards and has all the same features as our original model...

Power supply is not included The HiFiBerry AMP100 has been designed with more demanding speaker loads in mind. Just as with our other products, this new model features an improved signal path based on our DAC2 Pro section, but benefits from higher power...

Compatible with: Raspberry Pi A+/B+/2B/3B/3B+/4B+/Zero This is HiFiBerry DAC2 Pro with a pair of gold-plated RCA jacks. It can be simply plugged onto your Raspberry Pi, without any soldering. HiFiBerry DAC2 Pro is the sucessor of your popular DAC+ Pro...

Compatible with: Raspberry Pi A+/B+/2B/3B/3B+/4B/Zero The HiFiBerry DAC2 HD is a high-end DAC for the Raspberry Pi. It can be simply plugged onto your Raspberry Pi, without any soldering. ADDITIONAL INFORMATION Weight 30 g Dimensions 5.5...

Our HiFiBerry DAC+ ADC combines HifiBerry's well-know DAC+ with an analogue input. Both input and output support sample rates up to 192kHz. Note that you might need to update your Linux kernel to support the audio input features (at least Raspberry...

If you are looking for a case for HiFiBerry DAC+,Digi+ or AMP+ board - please check our own HighPi Case that was designed with HiFiBerry boards in mind. It's now in stock! HiFiBerry's best selling DAC with powerful onboard Digial Signal...

This is HifiBerry's smallest amplifier board, designed for the Raspberry Pi Zero. It can be used not only with the Raspberry Pi Zero, but also with the bigger Raspberry Pi B+/2 and 3.  Sometimes it just has to be small. For this use case...

Sometimes it just has to be small. For this use case HiFiBerry has build the DAC+ Zero, that fits perfectly onto a Raspberry Pi Zero. It does not have the advanced features as volume control, EEPROM, ultra-low-noise regulators, but still offers...

If you are looking for a case for HiFiBerry DAC+, Digi+ or AMP+ board - please check our own HighPi Case that was designed with HiFiBerry boards in mind. It's now in stock! HiFiBerry DAC+ Light with a pair of RCA jacks. It can be simply...

HiFiBerry DAC+ with a single 3.5mm phone jack. Includes the Nylon spacer.The HiFiBerry DAC+ is a high-resolution digital-to-analog converter for the Raspberry Pi. This is a special sound card for the Raspberry Pi, that is optimized for one specific use...

If you are looking for a case for HiFiBerry DAC+,Digi+ or AMP+ board - please check our own HighPi Case that was designed with HiFiBerry boards in mind. It's now in stock! The HiFiBerry DAC+ is a high-resolution digital-to-analog converter...

Tiny-UPS 3.0 – New & Improved - A tiny sized UPS for USB devices Tiny-UPS provides UPS for 5V USB or other power via an external Li-Polymer or Li-Ion battery (batteries are not included). Size and capacity of the battery does not matter...

A Raspberry Pi Zero and Pi Zero W (abbreviated here as PiZ) is a small size computer tethered to the wall power outlet. It needs the power via the micro-USB cable to operate. When PiZ needs to be moved from one location...

Pi-UpTime UPS 2.0 is a new and improved version of the Pi-UpTime UPS. (See a comparison chart between the original and the updated version 2.0) The Pi-UpTime UPS 2.0 is designed to work with the Pi-4 or other SBC’s, such as Odroid, Asus, Arduino...

Pi-BB is a powered half-size breadboard ideal for Raspberry Pi™, and compatible with Arduino & other development boards. Use with a Raspberry Pi or standalone for prototyping work. 300 connection points make it convenient to attach any...

PiZ-EzConnect KIT allows you to customize and build your own GPIO connector for a Raspberry Pi or a Pi-clone (e.g. Asus Tinker, PiOrange etc.) All 40 pins used by the Raspberry Pi are exposed. Soldering is required. KIT...

PiZ-EzConnect allows connection to any Raspberry Pi header pins via a terminal block. Like the Pi-EzConnect board, PiZ-EzConnect conforms to the Pi Zero dimensions, making this a nice, compact, easy to use and connect...

Pi-16ADC is a HAT or board designed for a Raspberry Pi. Pi-16ADC adds sixteen (16) Analog to Digital Converter (ADC) ports. These ports are ideally suited to collect data from analog sensors or other analog devices several times a second. Data...