This board allows you to connect up to six servomotors to a microcontroller. Breadboard-friendly, the ServoSix V3 is perfect for the Raspberry Pi Pico, but also compatible with ESP32, Arduino etc. Features Screw terminals and header pins for servo...

Arduino - Nano Screw Terminal Adapter - ASX00037  Build robust projects with secure and long lasting connection without the need of any soldering combining the Nano Screw Terminal Adapter and any of the boards from the Arduino Nano family...

Adafruit 3296 - DS1307 Real Time Clock Assembled Breakout Board This is a great battery-backed real time clock (RTC) that allows your microcontroller project to keep track of time even if it is reprogrammed, or if the power is lost. Perfect for...

Punch in your secret key into this numeric matrix keypad. This keypad has 12 buttons, arranged in a telephone-line 3x4 grid. It's made of a thin, flexible membrane material with an adhesive backing (just remove the paper) so you can attach it to nearly...

ELECFREAKS Octopus 5mm LED Brick - White - EF04065Octopus 5mmLED light Brick, and special sensors Arduino board, and an ambient light sensor extension combination can be used in interaction with the light works. When the LED light module is...

A capacitive moisture meter with temperature and relative humidity measurement. Compatible with micro:bit, Raspberry Pi, Arduino, Pico and most microcontroller boards. Monitor soil moisture, temperature and relative humidity measurement with the Plant...

Adjustable sensitivity Analog Photocell Brick allow you to adjust sensitivity of analog Photocel to get digital signal or set a trigger value. Characteristics The 3-pins ports is easy to plug and play. Specifications Item | Parameter :-: | :-:...

L3G4200D is a 3 axis gyroscope, providing you with very high resolution (16 bit) measurements at up to 2000 degrees per second (dps).   The gyroscope measures how much the device is rotating around all three axis, the range is user selectable and...

Description LCD display module with blue backlight Wide viewing angle and high contrast Built-in industry standard HD44780 equivalent LCD controller Commonly used in: copiers, fax machines, laser printers, Raspberry Pi DIY Users LCM type:...

0.91-inch White OLED Display Module (I2C Interface) The 0.91-inch White OLED Display Module (I2C Interface) is a compact screen ideal for adding clear visual output to microcontroller projects. With a 128×32 resolution and bright white pixels, it...

USB A-Male to USB Micro-B Cable - 3ftPerfect for micro:bit and some Arduino boards!

Raspberry Pi 48W Power Supply for Build HAT SC0747 - White - US Power your Raspberry Pi Build HAT projects with the Raspberry Pi Build HAT Power Supply. This 48W power supply will power the Build HAT and connected LEGO®...

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digital, analog and I2C/Uart interfaces...

Waveshare 3965 - RS232 Communication Board, SP3232 On Board, 3V-5.5V, ESD Enhanced, Hardware Flow Control Supported The RS232 Board is used for establishing RS232 communication with devices powered from 3V - 5.5V. It contains SP3232 (RS-232...

Features: On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver. On board then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring. All pins of chip have been lead to can be...

Adafruit Circuit Playground Express - Base Kit | 3517 It's the Circuit Playground Express Base Kit! It provides the few things you'll need to get started with the new Circuit Playground Express. This version of Circuit...

Waveshare 12915 - 250x122, 2.13inch E-Ink display HAT for Raspberry Pi, SPI interface This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh...

Waveshare 14542 - Speaker Module for micro:bit, makes it become a music player This product is a mini buzzer expansion board based on micro:bit, which integrates the IC NS8002 bridge audio power amplifier, a high quality speaker, and a headphone...

The Servo Six board simplifies the process of connecting up to six servo motors to a Raspberry Pi or Arduino. Resources Datasheet (PDF) Instructions (PDF) Hi Res Images (Google File Share)

Operating Voltage : 5V(DC) Static Current: Less than 2mA. Output Signal: Electric frequency signal, high level 5V, low level 0V. Sensor Angle: Not more than 15 degrees Detection Distance: 2cm-450cm High Precision: Up to 0.3cm Input Trigger...