Categories - PiShop.us

Sub Categories

Pro Mini Compatible Board – 5V

$5.95 $7.95

This is an Arduino-comptabile microcontroller ATmega328 running at 16MHz with external resonator (0.5% tolerance) 0.8mm Thin PCB USB connection off board Supports auto-reset 5V regulator Max 150mA output Over current protected Weighs less than...

Add to Cart

Arduino Compatible Ultrasonic Distance Measuring Sensor Module (HY-SRF05)

$3.95

This is an Arduino Compatible Ultrasonic sensor, it can be used to measure the distance from the sensor to other objects around it. These types of sensors are used on robots for collision avoidance and guidance or as trip sensors for alarm systems or...

Add to Cart

Mini 170 Tie Points Breadboard

$3.45

Mini 170 Tie Points Prototype Solderless Breadboard Features With self-adhesive tape Suitable for electronic circuit assembly / debugging / training A magic combination breadboard pattern of isolated tie points Dimensions 49 x 37 x 9mm

Add to Cart

Nano V3.0 R3 Microcontroller Compatible Board, ATMEGA328P-20AU

$9.95

This is Arduino-compatible nano V3.0 ATmega328P-AU microcontroller board It is Nano size, new version Bootloader all ready, just plug in USB and play. Microcontroller: ATmega328 Operating Voltage (logic level): 5 V Input Voltage (recommended):...

Notify Me

Riitek Ultra Mini Wireless Keyboard with Mouse Pad – No Laser Pointer

$12.95 $14.95

Easily the best looking and most functional Mini Wireless Mouse and Keyboard on the market, the Riitek RT-MWK01X1 Ultra Mini Keyboard is the perfect option for your Raspberry Pi XBMC or slim-line set-up! It’s been tested for full...

Notify Me

Micro Compatible Board, ATmega32u4

$6.95 $8.95

The Micro is an Arduino-compatible microcontroller board based on the ATmega32u4, developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHzcrystal...

Add to Cart

8×8 LED Dot Matrix Display

$3.95

MAX7219 Dot matrix LED Display Module Product Description 1.A single module can drive an 8 * 8 common cathode lattice. 2.Module Operating voltage: 5V. 3.Module size: 5 cm long X 3.2 cm wide X 1.5 cm high. 4.With four screws hole, aperture 3mm,...

Add to Cart

Super-bright 5mm IR LED – 940nm

$0.99

Infrared LEDs are used for remote controls (they’re the little LED in the part you point at your TV) and ‘night-vision’ cameras, and these little blue guys are high powered ones! They are 940nm wavelength, which is what nearly all...

Add to Cart

ESP8266 ESP-12E V1.0 Wifi CP2102 IoT Lua 267 for NodeMCU

$7.95

Product Description The NodeMcu is an open-source development kit based on the popular chip ESP8266 (ESP-12E), using the Lua programming language, a development environment for applications that provide fast Wi-Fi connectivity. The ESP8266 is a...

Add to Cart

Mega 2560 R3 Development Compatible Board

$15.95

This is an Arduino-compatible microcontroller featuring the ATmega2560-16U2 chip. Notes Recommended Input Voltage: 7-12V DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA 8KB of Flash Memory is used by bootloader This is an...

Notify Me

Uno Compatible Motor Control Shield (L293D Motor Driver)

$7.95

This is a motor shield for an Arduino Uno that makes it easy for your Arduino to control various types of motors! All you need to do is attach this to your Uno, run wires from your motors to the respective terminal blocks, and supply some external power...

Add to Cart

Compatible LCD Display 2.5″ (LCD 1602) (I2C communication)

$6.95

This is a very popular LCD for the Arduino or Freeduino board. It includes a 2×16 LCD display which is backlit in blue. It uses the I2C communications protocol so it is compatible with any Arduino or Raspberry Pi! Key Features: Supports I2C...

Add to Cart

LCD1602 Arduino Compatible LCD Keypad Shield

$6.95

This is a very popular LCD Keypad shield for Arduino or Freeduino board. It includes a 2×16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD. Analog Pin 0 is used to read the pushbuttons. The...

Add to Cart

4-Channel Relay Module – 5V

$5.95

This is a 5V 4-Channel Relay interface board. Be able to control various appliances, and other equipment with large currents. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino, etc.). Features 5V 4-Channel Relay interface...

Notify Me

Uno R3 Rev3 Development Compatible Board

$7.95 $12.95

This is an Arduino-compatible product Added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board Reliable RESET...

Notify Me

USB Cable with Switch

$2.95

Caution! This switch is NOT compatible with the Raspberry Pi 4B. Please see the Type-C Power Switch for Raspberry Pi 4 instead. Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This...

Add to Cart

40 Pin GPIO Connector Header

$1.95

Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made 2x20 female header. The female header part has extra spaces to make it tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. The stacky pin...

Add to Cart

:MOVE mini buggy kit (micro:bit not included)

$19.95 $34.95

CLEARANCE! Caution, this is the older model of the mini buggy. It's only compatible with Micro:Bit V1. The Kitronik :MOVE mini buggy kit for the BBC micro:bit provides a fun introduction to robotics. The :MOVE mini is a 2 wheeled robot that is suitable...

Choose Options

Helping Third Hand Magnifier W/Magnifying Glass Tool

$6.95

Type a description for this product here...

Add to Cart

Mini USB Microphone

$5.95

Hey, listen up! It’s the world’s smallest USB microphone! OK maybe it’s not in the Guinness Record Book, but it is pretty darn small! This plug-and-play Mini USB Microphone needs no driver, and its USB interface means you...

Add to Cart