Categories - PiShop.us

Sub Categories

Flex Cable for Raspberry Pi Camera - 15cm / 6"

$2.45

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.

Add to Cart

Waveshare 18396 - 5inch Capacitive Touch Display For Raspberry Pi, 800×480, DSI Interface - 5inch DSI LCD

5inch Capacitive Touch Display for Raspberry Pi, DSI Interface, 800×480

$42.95

Waveshare 18396 - 5inch Capacitive Touch Display For Raspberry Pi, 800×480, DSI Interface - 5inch DSI LCD Features Size: 5" Resolution: 800×480 Display Port: DSI Power Consumption: Low Power Touch Type: Capacitive Touch Points:...

Add to Cart

Sense HAT (B) for Raspberry Pi

$26.95

Waveshare 16864 - Sense HAT (B) For Raspberry Pi, Onboard Multi Powerful Sensors, Supports External Sensors - Sense HAT (B) Raspberry Pi and external sensors are NOT included Overview The Sense HAT (B) is specially designed for Raspberry Pi,...

Add to Cart

2.8″ Touch Screen Expansion For CM4, with Interface Expander

$69.95

Waveshare 21435 - 2.8″ Touch Screen Expansion For Raspberry Pi Compute Module 4, Fully Laminated Display, Gigabit Ethernet, USB2.0, Optional Interface Expander Fully Laminated Touch Screen: 2.8″ Display With 5-Point Capacitive Touch Control,...

Add to Cart

Nano Base Board (A) for Raspberry Pi Compute Module 4

$24.95

Waveshare 21634 - Nano Base Board (A) For Raspberry Pi Compute Module 4, Same Size As The CM4 - CM4-NANO-A Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products Same Size As The CM4: Standard CM4 Socket, With...

Add to Cart

Nano Base Board (B) for Raspberry Pi Compute Module 4

$25.95

Waveshare 21726 - Nano Base Board (B) For Raspberry Pi Compute Module 4, Same Size As The CM4 Specifications CM4 socket suitable for all variants of Compute Module 4 Networking Gigabit Ethernet RJ45 connector Connector Raspberry Pi 40PIN...

Add to Cart

Arduino Compatible Base Board For Raspberry Pi CM4

$28.95

Waveshare 21738 - Arduino Compatible Base Board For Raspberry Pi Compute Module 4, HDMI, USB, M.2 Slot Specifications CM4 socket suitable for all variants of Compute Module 4 Connector M.2 M KEY slot, for connecting communication module or...

Notify Me

Breadboard-friendly Mini PIR Motion Sensor with 3 Pin Header

$3.95

PIR sensors are used to detect motion from pets/humanoids from about 5 meters away (possibly works on zombies, not guaranteed). This sensor is much smaller than most PIR modules, which makes it great for unobtrusive projects. It's also fully-contained -...

Add to Cart

Breadboard Wiring Kit

$9.45

This economy breadboard wiring kit contains 140 pcs of cut and preformed jumper wires in a plastic reusable storage box. These wiring kits are ideal for use with any breadboard. Each jumper has stripped ends and preformed right-angled leads for easy...

Add to Cart

Pimoroni OmniVESA

$4.95

The perfect mounting solution for your Raspberry Pi! Simply remove the protective backing from the OmniVESA and follow the instructions below to mount your Raspberry Pi either bare or in any of the most popular cases. The nylon screws provided are...

Add to Cart

Servo 2040 - 18 Channel Servo Controller

$27.95

Build the hexapod/robot arm/other articulated contraption of your dreams with this all-in-one RP2040 powered servo controller with current measurement, sensor headers and RGB LEDs. Servo 2040 is a standalone servo controller for making things with lots...

Notify Me

RGB LED for micro:bit

$5.95

The MonkMakes RGB LED for micro:bit can be used to make any colour by controlling the red green and blue levels. Handily mounted on a PCB it connects to the micro:bit using alligator clips. Resources Datasheet (PDF) Instructions (PDF) Hi Res Images...

Notify Me

MonkMakes Protoboard Kit

$24.95

MonkMakes Protoboard is designed to make the creation of one-off projects and prototypes as simple to make as possible by: 1. Using the same layout as 400 point half' solderless breadboard (inspired by Adafruit's Permaproto boards) 2. Adding...

Add to Cart

Switch for micro:bit

$7.95

The MonkMakes Switch for micro:bit is a solid-state (no moving parts) switch that allows an output of a micro:bit to turn things on and off. This board can be used to switch low voltage devices such as light bulbs, a motor, a small heating element or...

Add to Cart

Kitronik Simply Servos Board for Raspberry Pi Pico

$7.95 $9.95

Make the RiPi Pico the brains of your next robotics project with the Kitronik Simply Servos for Raspberry Pi Pico. The compact Simply Servo board for Raspberry Pi Pico allows for up to 8 servos to be controlled simultaneously, making it ideal for...

Add to Cart

Kitronik Air Quality Datalogging Board for Pico

$39.95 $44.95

Monitor and analyze the air you breathe with the Kitronik Air Quality Board for the Raspberry Pi Pico. Great for home and in the classroom. The Kitronik Smart Air Quality Board for Pico provides a complete air monitoring and reporting solution for...

Add to Cart

USB LED Ambient Atmosphere Light - White - 1 Piece

$2.95

1 Piece Car USB LED Atmosphere Lights Decorative Lamp Emergency Lighting Universal PC Portable Plug and Play Red/Blue/White Features Play and plug Mini size, easy for usage Universal for cars/automobiles/PC/computer/Portable battery with USB...

Add to Cart

TOF Laser Range Sensor

$26.95

Waveshare 18301 - TOF (Time Of Flight) Laser Range Sensor, UART / CAN Bus, Cascading Support, Comes With Host Computer Assistant Software The TOF Laser Range Sensor is a TOF-based (time of flight) laser ranging sensor with embedded...

Notify Me

Uninterruptible Power Supply UPS HAT (B) for Raspberry Pi, 5V Output, up to 5A Current, Pogo Pins Connector

$25.95

Waveshare 20567 - UPS HAT (B) For Raspberry Pi, 5V Uninterruptible Power Supply, 5A High Current, Pogo Pins Connector Features Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc. I2C bus communication, monitoring the...

Notify Me