PIM485 - Pump out some mini beats with Pirate Audio Speaker! This diminutive sound system has an I2S DAC, amp, mini mono speaker, high-res display, and playback control buttons. Pirate Audio Speaker is perfect for making a...

Autopilot HAT for Raspberry Pi powered by ArduPilot and ROS Turn your Raspberry Pi® into a drone controller by using the might of sensors and controllers on board. Currently supported boards​ ArduPilot on Navio2 works on: Raspberry Pi 4 Model...

If you're looking for the most compact li'l color display for a Raspberry Pi B+, Pi 2, & Pi 3 (most likely a Pi Zero) project, this might be just the thing you need! The Adafruit Mini PiTFT - 135x240 Color TFT Add-on for...

Raspberry Pi Board not Included The PiTraffic is a low-cost hardware Shield designed to allow Raspberry Pi users to take their first steps into interfacing with the real world. Designed with the learning in mind, everyone...

Raspberry Pi Board not Included Designed to help with a Raspberry Pi based Robot project. This board can control a DC motor or stepper motor. You can connect your IR and Ultrasonic sensors to tell your robot about its environment. You can easily...

PiStack is an I/O expansion kit designed for Raspberry Pi, which provides 3 sets of 2x20 pin headers, which means a handy way to "stack" multi different HATs together, and use them as a specific combination/project. Features Standard Raspberry Pi...

Waveshare 19979 - 2-Channel RS232 Module For Raspberry Pi Pico, SP3232EEN Transceiver, UART To RS232 - Pico-2CH-RS232 Features Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series Using UART bus, easily converting UART to RS232,...

Audio Codec HAT is a low power, high quality stereo CODEC designed for portable digital audio applications which is based on WM8960 IC that have the advantages like Low leakage, excellent PSRR and pop/click suppression mechanisms which allow direct...

LoRa™ HAT, a low-power consumption data transmission module, comes with an onboard CH340 USB TO UART converter, Voltage Level Translator(74HC125V), E22-900T22S and E22-400T22S SMA antenna connector, IPEX antenna connector, LoRa™ Spread...

StackyPi is a compact and advanced board that is designed with the RP2040 Micro-controller, which provides one set of 2x20 pin headers on which you can connect Raspberry Pi HATs. It means that one can plug HAT designed for Raspberry Pi and run it via the...

A fully featured environmental monitoring / citizen science add-on for Raspberry Pi Pico and Pico W. It has a built-in colour 1.54" LCD screen and is jam-packed with sensors! Pico Enviro+ Pack measures just 61 x 31.5 mm, but we've filled it to the brim...

PiRelay V2 is developed by SB Components with the potential to control 4 appliances and loads up to 250V AC/ 7 A, 30V DC/ 10A to provide a way to control the high voltage/current devices. It helps the user to enhance the intelligence of the appliances...

Make the Raspberry Pi Pico the core of your new buggy project with the Kitronik Compact Motor Driver Board for Raspberry Pi Pico. Make the Raspberry Pi Pico the core of your new buggy project with the Kitronik Compact Motor Driver Board for Raspberry Pi...

Now with SPI! Grow your projects on Breakout Garden. It's the easiest way to use breakouts with your Raspberry Pi. There's no soldering required, just pop up to six Pimoroni breakouts (4xI2C, 2xSPI) into the slots on Breakout Garden and get started...

Pimoroni PIM532 - Breakout Garden for Raspberry Pi 400 & 500Now at right angles! An easy, solderless, swappable way to use breakouts with your Raspberry Pi 400/500 - just pop up to three Breakout Garden breakouts (2 x I2C, 1 x SPI) into the slots and...

This new Digi2 is a revised version of the Digi+ model which is compatible with both the Pi4 rev. 1.5 and backwards. The new design features a second GPIO header that accommodates our add-on boards and has all the same features as our original model...

HiFiBerry AMP100 - 100W-per-channel DAC/Amplifier - Powerful audio for Raspberry Pi The HiFiBerry Amp is a 100W-per-channel DAC/Amplifier. It combines a DAC+ Pro and a powerful 100W-per-channel Class-D amplifier. An external 12-30V power supply is...

A Raspberry Pi Pico is not included A sparkly matrix of over a hundred fantabulous RGB LEDs for all your rainbow needs and some handy buttons - sized perfectly for the Raspberry Pi Pico! Unicorn setup is resized so that it fits nicely on the back of...

Waveshare 16864 - Sense HAT (B) For Raspberry Pi, Onboard Multi Powerful Sensors, Supports External Sensors - Sense HAT (B) Raspberry Pi and external sensors are NOT included Overview The Sense HAT (B) is specially designed for Raspberry Pi,...

Monitor and analyze the air you breathe with the Kitronik Air Quality Board for the Raspberry Pi Pico. Great for home and in the classroom. The Kitronik Smart Air Quality Board for Pico provides a complete air monitoring and reporting solution for...