A sophisticated, hackable, 32x24 pixel thermal camera breakout! Use it to monitor the temperature of your CPU or coffee pot, or to build your own heat-seeking night vision camera. Works with Raspberry Pi or Arduino. It's perfect for building into...

This light and proximity sensor detects light over a wide dynamic range (0.01 lux to 64,000 lux) and proximity within a short range of ~5cm. The LTR-559 is the same sort of sensor that you'd find next to the camera in your phone to detect when it's next...

An all-singing, all-dancing time of flight distance sensor that uses PEW PEW LASERS (low-powered ones), our VL53L1X breakout is easy to use with Raspberry Pi or Arduino alike! These low-power-laser-based time of flight sensors have great accuracy and...

Measure changes in the concentration of gases including carbon monoxide (CO), nitrogen dioxide (NO2), and ammonia (NH3) with this Breakout Garden compatible I2C breakout. The MICS6814 sensor comprises three semiconductor gas sensors in a single package,...

A fast and precise environmental sensor that can measure temperature, pressure, and altitude. Our BMP280 breakout is Raspberry-Pi and Arduino-compatible. If you're looking for a simple temperature and pressure sensor, then this is the one to pick. It's...

A minimal RP2040 breakout board wrangled into a Pin Grid Array, with 8MB flash and a maximal dash of retraux style. PGA2040 is a compact RP2040 breakout intended for the most svelte and embeddable of projects. It contains only the components necessary...

Waveshare 16613 - ESP32-CAM, Camera Module Based On ESP32, OV2640 Camera And ESP32-CAM-MB Adapter Included Overview The ESP32-CAM is a small size, low power consumption camera module based on ESP32. It comes with an OV2640 camera and an...

Measure indoor air quality—total volatile organic compounds (TVOC) and equivalent CO2 (eCO2)—with this digital sensor for Raspberry Pi and Arduino. The SGP30 sensor measures two different types of gases: volatile organic compounds (like...

L3G4200D is a 3 axis gyroscope, providing you with very high resolution (16 bit) measurements at up to 2000 degrees per second (dps).   The gyroscope measures how much the device is rotating around all three axis, the range is user selectable and...

Description LCD display module with blue backlight Wide viewing angle and high contrast Built-in industry standard HD44780 equivalent LCD controller Commonly used in: copiers, fax machines, laser printers, Raspberry Pi DIY Users LCM type:...

0.91-inch White OLED Display Module (I2C Interface) The 0.91-inch White OLED Display Module (I2C Interface) is a compact screen ideal for adding clear visual output to microcontroller projects. With a 128×32 resolution and bright white pixels, it...

SparkFun BOB-09110 - Thumb Joystick Breakout This is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and includes 4 mounting holes in the corners. Size: 1" x 1.25" Documents Schematic Eagle...

By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer counter, which species rotation counts are not limited. With the buttons on the...

This DC-DC 12V to 3.3V 5V 12V Power Module Multi Output Voltage Conversion is also known as Buck Converter or also as Step-Down Voltage Converter. The module is capable of altering the output of the power source/supply before...

Features: On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver. On board then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring. All pins of chip have been lead to can be...

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2, Pi 3 & Pi 4! (Any Pi with 2x20 connector)The Raspberry Pi B+ and Pi 2 has landed on the Maker World like a 40-GPIO...

If you've ever ordered and wire up a 9-DOF sensor, chances are you've also realized the challenge of turning the sensor data from an accelerometer, gyroscope and magnetometer into actual "3D space orientation"! Orientation is a hard problem to solve. The...

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi  with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header Key features: Solderless or soldered connections for all...

ElecFreaks Micro:bit Breakout Board matches perfectly with the BBC micro:bit pins. Plug in this breakout board for instant access to micro:bit’s GPIO. Features Input voltage: 3.3V, Powered by the edge connector of the micro:bit. Extend all of...

Caution! The BBC micro:bit is NOT included. You can buy the BBC micro:bit here. Looking to do more with your BBC micro:bit? Unlock its potential with this pre-built version of Kitronik Edge Connector Breakout Board! This...