Need some really bright LEDs? We are big fans of these white LEDs. They are very bright and have about 20degree LED beam. They go easily into a breadboard and will add that extra zing to your project. Pack of 25 white LEDs 5mm diameter Cool white...

Split core current transformer are sensors that are used for measuring alternating current. They are particularly useful for measuring whole building electricity consumption (or generation for that matter). This Split core current transformer is...

PiRelay V2 is developed by SB Components with the potential to control 4 appliances and loads up to 250V AC/ 7 A, 30V DC/ 10A to provide a way to control the high voltage/current devices. It helps the user to enhance the intelligence of the appliances...

This is a 10 Pack of 100 Ω Resistors. 100 Ohm ±5%, 1/4W Through Hole Resistor Axial Flame Retardant Coating, Safety Carbon Film

A capacitive moisture meter with temperature and relative humidity measurement. Compatible with micro:bit, Raspberry Pi, Arduino, Pico and most microcontroller boards. Monitor soil moisture, temperature and relative humidity measurement with the Plant...

Now with SPI! The easiest way to use breakouts with your Raspberry Pi. There's no soldering required, just pop up to three Pimoroni breakouts (2xI2C, 1xSPI) into the slots on Breakout Garden Mini and get started coding and creating. Grow...

Now with SPI! Grow your projects on Breakout Garden. It's the easiest way to use breakouts with your Raspberry Pi. There's no soldering required, just pop up to six Pimoroni breakouts (4xI2C, 2xSPI) into the slots on Breakout Garden and get started...

Now at right angles! An easy, solderless, swappable way to use breakouts with your Raspberry Pi 400/500 - just pop up to three Breakout Garden breakouts (2 x I2C, 1 x SPI) into the slots and get coding and creating! Breakout Garden 400/500 plugs into...

We all know that you can never get too many LEDs. Don't worry, we've got you covered. This is a pack of basic red, yellow, blue and green 5mm LEDs (5 of each) all conveniently packaged in a nice reusable ESD safe bag. Includes 5x - Basic Red 5x -...

Model : LJ12A3-4-Z/BXSensor Type: InductiveOutput Type : Normally OPEN (NPN)Cable Length: 1m (approx.)Detecting Distance : 4mm (May vary slightly by material)Detecting Object : MetalSupply Voltage : DC 6-36VCurrent Output : 300mAResponse Frequency :...

Adjustable sensitivity Analog Photocell Brick allow you to adjust sensitivity of analog Photocel to get digital signal or set a trigger value. Characteristics The 3-pins ports is easy to plug and play. Specifications Item | Parameter :-: | :-:...

Waveshare 16864 - Sense HAT (B) For Raspberry Pi, Onboard Multi Powerful Sensors, Supports External Sensors - Sense HAT (B) Raspberry Pi and external sensors are NOT included Overview The Sense HAT (B) is specially designed for Raspberry Pi,...

PIR sensors are used to detect motion from pets/humanoids from about 5 meters away (possibly works on zombies, not guaranteed). This sensor is much smaller than most PIR modules, which makes it great for unobtrusive projects. It's also fully-contained -...

1 Piece Car USB LED Atmosphere Lights Decorative Lamp Emergency Lighting Universal PC Portable Plug and Play Red/Blue/White Features Play and plug Mini size, easy for usage Universal for cars/automobiles/PC/computer/Portable battery with USB...

Monitor air pollution cheaply and accurately with this matchbox-sized particulate matter (PM) sensor from Plantower! It senses particulates of various sizes (PM1, PM2.5, PM10) from sources like smoke, dust, pollen, metal and organic particles, and more...

A handy-dandy breakout that converts between the picoblade connector cable on the PMS5003 particulate matter sensor and a standard male 2.54mm pitch header. Use this breakout to connect a PMS5003 particulate matter sensor straight to your Raspberry Pi...

The super-smart BME688 air quality sensor can measure temperature, pressure and humidity precisely. It also has an upgraded, AI-enhanced gas scanner! Like its predecessor the BME680, this high quality sensor can be used to monitor every aspect of your...

A really nice environmental sensor that's ideal for indoor monitoring of temperature, pressure, and humidity, or even outdoors in a suitable enclosure. It's Raspberry Pi and Arduino-compatible. We use this sensor on our Enviro+ environmental monitoring...

A tiny, RGBW-illuminated, clickable Trackball Breakout that's perfect for adding navigation or control to your Raspberry Pi or Arduino projects. We've taken a trackball module from everyone's favourite fruit-flavoured phone and added a bunch of clever...

A sophisticated, hackable, 32x24 pixel thermal camera breakout! Use it to monitor the temperature of your CPU or coffee pot, or to build your own heat-seeking night vision camera. Works with Raspberry Pi or Arduino. It's perfect for building into...