Kitronik :MOVE mini Bumper Add on V2 $2.95 With this Bumper add-on for :MOVE mini for the BBC microbit MK2, everyone's favourite little programmable robot buggy just got much better. If you were looking for an add-on that allows for competitive games, then this is the add-on for you. This... Add to Cart
Kitronik Air Quality and Environmental Board for micro:bit $42.95 Monitor and analyse the air you breathe with the Kitronik Air Quality Board. Great for home and the classroom. The Kitronik Air Quality Board provides a complete air monitoring and reporting solution for the BBC micro:bit. The wealth of onboard sensors... Add to Cart
Kitronik Compact 16 Servo Driver Board for the BBC micro:bit $12.95 Take your robotics project to the next level with the Kitronik compact 16 servo driver board for the BBC micro:bit. This board allows up to 16 Remote Control (RC) servos to be driven simultaneously. It is based on the PCA9685 driver IC. The board... Add to Cart
:MOVE Line Following Board $5.95 $7.95 Add line following to your micro:bit buggy/robots with the compact Kitronik :Move Line Following Board for BBC micro:bit, also fully compatible with :MOVE mini. Add line following to your BBC microbit Robot/buggy projects... Add to Cart
Breadboard Breakout for BBC micro:bit $6.95 Easy way to connect breadboard from micro:bit by using all new SB Components micro:bit Breadboard Breakout it allows you to connect or plug a BBC micro:bit into a standard 2.54 mm pitch breadboard. The micro:bit Breadboard Breakout PCB is designed to... Add to Cart
CO2 Sensor for micro:bit $152.95 This board, designed for use with the Lets Talk Science Living Space Project, provides a CO2, temperature and Relative Humidity measurements to a BBC micro:bit. Getting Started Wire-up the board to your micro:bit and flash this... Notify Me
Kitronik :MOVE mat line following and activity maps - A1 size $5.95 The :MOVE mat line following and activity maps - A1 size is an accessory for :MOVE Motor, :MOVE mini and also the Edison V2 Robot. It can be used just for fun, or as part of a project in the classroom. The mat is double-sided, with a line... Notify Me
Octopus 5mm LED Brick OBLED – Red $2.45 Octopus Electronic Bricks, you can use them to build electronics projects just as easily as piling bricks. By using Octopus electronic bricks, you can connect Arduino/Freaduino compatible boards easily with various digital, analog and I2C/Uart... Add to Cart
Octopus Analog Photocell Brick Adjustable Sensitivity $2.95 Adjustable sensitivity Analog Photocell Brick allow you to adjust sensitivity of analog Photocel to get digital signal or set a trigger value. Characteristics The 3-pins ports is easy to plug and play. Specifications Item | Parameter :-: | :-:... Add to Cart
Kitronik Environmental Control Board for BBC micro:bit $28.95 Unlock the secrets of nature with code, engineering, and the Environmental Control Board for micro:bit! The Kitronik environmental control board provides a variety of sensor inputs and connection points for the BBC micro:bit (V1 & V2) and provides... Add to Cart
Kitronik Prototyping System for the BBC micro:bit $16.95 Please Note: BBC micro:bit, 2 x AAA Battery Cage and 2 x AAA Batteries are NOT included This Prototyping System for the BBC micro:bit is a great way to start making circuits and making experiments without the need to solder. This prototyping system... Add to Cart
Kitronik Terminal Block Breakout for BBC micro:bit $12.95 The Terminal Breakout board for the BBC microbit does exactly what it says on the tin. It breaks out all of the signal and power pins on the microbit to user friendly terminal blocks. No more untangling M/M or M/F jumper cables from the hastily tidied... Add to Cart
Official micro:bit USB Lead, micro-USB to USB, 30cm, Green $1.95 Official micro:bit branded USB cables that allow you to power and transfer data to your micro:bit. High quality construction with PVC cable sleeve and embossed logos. USB 2.0 data transfer rates up to 480Mb/s USB A Plug to USB Micro B Plug 0.3m... Add to Cart
Pull back motor, axle and wheels kit $2.95 Design and build your own battery-less buggy with this pull-back motor, axles, and wheels kit. Design your own chassis, add this kit, pull it backwards, let go, and let the elastic potential energy stored in the spring inside the motor propel your buggy... Add to Cart
Elecfreaks Octopus Wind Speed Sensor $26.95 This is a wind speed sensor with a rain-proof design. It has a standard connector for Octopus brick series products. We can use it to test wind speed. It adopts three half-sphere bowls with a 6CM diameter, presenting 120 degrees branch installation... Add to Cart
Kitronik Audio Cable for BBC micro:bit $3.95 This is the perfect cable choice for those that want to output music or general sound for the BBC micro:bit, to either headphones or speakers. At one end of the cable are the black and red crocodile clips, which connect to the microbits GND and Pin 0... Add to Cart
Kitronik Klip Halo V2.0 with JST $9.95 The JST Version Klip Halo V2.0 board for the BBC micro:bit breaks out each of the 19 GPIO pins from the BBC micro:bit, with easily accessible, clearly marked connection points compatible with both crocodile clips and 4mm banana plugs. The edge connector... Add to Cart
Kitronik Klip Motor Driver for BBC micro:bit $16.95 The Klip Motor Driver for the BBC micro:bit does much more than just drive motors. It also breaks out pins 0, 1, 2, 3V and GDN (just like the main pads on the BBC micro:bit itself), and there’s a ZIP LED output as well, along with the battery... Add to Cart
Kitronik LAMP:bit - Street Light for BBC micro:bit $6.95 The LAMP:bit features connections which allow the microbit to be bolted/clipped directly to it. It has been designed to replicate a streetlight, in form and function. This is a great board for use in transportation projects and has been designed to fit... Add to Cart
Klimate Board for the BBC micro:bit $20.95 Add real-time clock and environment sensing (pressure, temperature, & humidity) capabilities to the micro:bit with the Kitronik RTC Board. MakeCode compatible. This RTC & Klimate board is a Real Time Clock (RTC) and environmental sensor (BME280)... Add to Cart