The MonkMakes RGB LED for micro:bit can be used to make any colour by controlling the red green and blue levels. Handily mounted on a PCB it connects to the micro:bit using alligator clips. Resources Datasheet (PDF) Instructions (PDF) Hi Res Images...

The MonkMakes Switch for micro:bit is a solid-state (no moving parts) switch that allows an output of a micro:bit to turn things on and off. This board can be used to switch low voltage devices such as light bulbs, a motor, a small heating element or...

With the Kitronik Compact Robotics Board, the BBC micro:bit can be used to drive 4 motors (or 2 stepper motors) and 8 servos. Coupled with 17 other I/O expansion points, this means the BBC micro:bit can very easily become the core of a whole variety of...

An electronics kit for your BBC micro:bit 2. Build 7 great projects. Requires micro:bit V2 Build 7 great projects: Lighthouse Movement Alarm Color Mixer Anemometer Fan Speed Controller Clap Controller Fan Nightlight The kit...

Works with Micro:bit v1 and v2. The MonkMakes Slider for micro:bit allows you to interact with your micro:bit by sliding a control left and right. The board uses a 10kΩ linear variable resistor (pot) to output a voltage between 0 and 3V that can...

Works with Micro:bit v1 and v2. The MonkMakes Connector for micro:bit makes it super-easy to connect I2C, SPI and other devices to your micro:bit without losing the main connector rings. Unlike other connectors that are designed to break-out all the...

The MonkMakes Solar Experimenters Kit for micro:bit is a project kit that allows you to experiment with harvesting energy from the sun and other light sources. It consists of a solar panel to harvest the energy, a solar store that stores the harvested...

We got fed up with low quality, overly-long alligator clip leads, so we got some made to our specification. Our leads are supplied in a bundle of 10 leads. Two each of black, red, white, green and yellow. Each lead is 185mm (7.5 inches) long from tip to...

Click Me to Download the Instructions for this kit. The Servo Kit for micro:bit makes it easy to connect up three servomotors from your micro:bit. Not only that, but the kit also comes with three servomotors and a battery box. Just add a micro:bit and...

The MonkMakes Servo for micro:bit provides a really easy way to attach up to three servomotors to a BBC micro:bit. The board requires a power supply or battery pack to provide 5 or 6V to the servomotors. It includes a voltage regulator that will...

The MonkMakes Power for micro:bit opens up lots of ways of powering your micro:bit. This tiny board has a standard DC barrel jack socket at one end and provides a regulated 3.3V output that you can use to power your micro:bit using the JST battery...

The 7-segment for micro:bit is a four digit 7-segment display for micro:bit. You can use it to display numbers, but it can also display letters and other characters, albeit with the limits imposed by the 7 segments of each digit. Powered directly from...

The MonkMakes Sensor Board for micro:bit allows you to sense sound level, temperature and light level. Features 3V and GND connections can be made from either side and allow you to power a second board such as the MonkMakes Relay...

The MonkMakes Speaker for micro:bit is a neat little amplified speaker that connects to the micro:bit using alligator clips. Despite its small size, the speaker is pretty loud. Please note that the individual boards are packed in antistatic bubblewrap...

A rechargeable battery and acrylic case kit for your micro:bit. The Charger for micro:bit automatically charges while you are connected to USB. Make your micro:bits mobile without having to continually hunt for AAA batteries. Resources Datasheet...

CLEARANCE! Caution, this is the older model of the mini buggy. It's only compatible with Micro:Bit V1. The Kitronik :MOVE mini buggy kit for the BBC micro:bit provides a fun introduction to robotics. The :MOVE mini is a 2 wheeled robot that is suitable...

CLEARANCE: This version only works with Micro:bit V1 The MI:power board for the BBC micro:bit brings real portability to your wearable projects. The stylish, lightweight PCB is designed to fit snugly against the BBC micro:bit and...

Add some colour to your next coding project with our new Halo board for the BBC micro:bit. The Halo has 24 ZIP LEDs, which are individually addressable full colour LEDs. This means that each LED can display a huge spectrum of colours, allowing...

The MonkMakes Relay for micro:bit is a solid-state (no moving parts) relay that allows an output of a micro:bit to turn things on and off. This relay can be used to switch low voltage devices such as light bulbs, a motor, a small heating element or even...

Compatible with micro:bit V1 only!   Caution! The BBC micro:bit, and MI:power board are NOT included. This is the ORANGE version of this case. This case has been designed to protect a BBC micro:bit with...