Adafruit I2S 3W Stereo Speaker Bonnet for Raspberry Pi - Mini Kit $12.95 Hey Mr. DJ! Turn up that Raspberry Pi mix to the max with this cute 3W Stereo Amplifier Bonnet for Raspberry Pi. (It's not big enough to be an official HAT, so Adafruit called it a bonnet, you see?) It's the exact same size as a Raspberry... Notify Me
Assembled Pi T-Cobbler Plus - GPIO Breakout for A+/B+/Pi2/Pi3/Pi4/Zero $7.95 This is the assembled version of the Pi T-Cobbler Plus. It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2, Pi 3 & Pi 4! (Any Pi with 2x20 connector)The Raspberry Pi B+ and Pi 2 has landed on the Maker World like a 40-GPIO... Add to Cart
NeoPixel Ring - 16 x 5050 RGB LED with Integrated Drivers $9.95 Round and round and round they go! 16 ultra bright smart LED NeoPixels are arranged in a circle with 1.75" (44.5mm) outer diameter. The rings are 'chainable' - connect the output pin of one to the input pin of another. Use only one microcontroller pin to... Add to Cart
Circuit Playground Express - Base Kit $29.95 It's the Circuit Playground Express Base Kit! It provides the few things you'll need to get started with the new Circuit Playground Express. This version of Circuit Playground is super powered, and will work with Microsoft... Add to Cart
Small Alligator Clip Test Lead (set of 12) $3.95 Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors. Strong and grippy, these always come in handy! We often use these in... Add to Cart
Rugged Metal Pushbutton - 16mm 6V RGB Momentary $10.95 A full color RGB LED ring light! These chrome-plated metal buttons are rugged, but certainly not lacking in flair. Simply drill a 16mm hole into any material up to 1/4" thick and you can fit these in place - there's even a rubber gasket to keep... Add to Cart
Adafruit Feather nRF52 Bluefruit LE - nRF52832 $24.95 The Adafruit Feather nRF52 Bluefruit is another easy-to-use all-in-one Bluetooth Low Energy board, with a native-Bluetooth chip, the nRF52832! It's Adafruit's take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in... Notify Me
Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055 $34.95 If you've ever ordered and wire up a 9-DOF sensor, chances are you've also realized the challenge of turning the sensor data from an accelerometer, gyroscope and magnetometer into actual "3D space orientation"! Orientation is a hard problem to solve. The... Add to Cart
Flex Cable for Raspberry Pi Camera - 200mm / 8" $1.95 This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different size. Works great, just carefully open the connector on the Pi and slip this one in.This... Add to Cart
Adafruit BME280 I2C or SPI Temperature Humidity Pressure Sensor $14.95 Bosch has stepped up their game with their new BME280 sensor, an environmental sensor with temperature, barometric pressure and humidity! This sensor is great for all sorts of weather/environmental sensing and can even be used in both I2C and... Add to Cart
PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A - 1000C $19.95 PowerBoost 1000C is the perfect power supply for your portable project! With a built-in load-sharing battery charger circuit, you'll be able to keep your power-hungry project running even while recharging the battery! This little DC/DC boost... Notify Me
Adafruit BMP280 I2C or SPI Barometric Pressure & Altitude Sensor $9.95 Bosch has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can... Add to Cart
GPS Antenna - External Active Antenna - 3-5V 28dB 5 Meter SMA $14.95 Give your Ultimate GPS V3 a boost with this external active antenna. This GPS antenna draws about 10mA and will give you an additional 28 dB of gain. It's got a 5 meter long cable so it will easily reach wherever you need it to. The antenna is magnetic... Add to Cart
Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates - Version 3 $39.95 Version 3 comes with the latest module which has external antenna support and Pulse-Per-Second output Adafruit carries a few different GPS modules, but none that satisfied their every desire - that's why they designed this little GPS breakout board... Add to Cart
12mm Diffused Flat Digital RGB LED Pixels (Strand of 25) - WS2801 $34.95 $39.95 RGB Pixels are digitally-controllable lights you can set to any color, or animate. Each RGB LED and controller chip is molded into a 'dot' of silicone. The dots are weatherproof and rugged. There are four flanges molded in so that you can 'push' them... Add to Cart
Adafruit Perma-Proto HAT for Pi Mini Kit - No EEPROM $4.95 Design your own Pi HAT, attach custom circuitry and otherwise dress your Pi Zero, A+, B+, Pi 2 or Pi 3 (any Pi with a 2x20 connector) with this jaunty prototyping HAT kit. To kick off the Adafruit HAT party, we have this Perma-Proto inspired plug in... Notify Me
Flex Cable for Raspberry Pi Camera - 300mm / 12" $2.45 This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 300mm... Add to Cart
GPIO Header for Raspberry Pi - 2x20 Female Header $1.45 Connect your own PCB to a Raspberry Pi with this normal-height female header. The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3mm of pins, compared with... Add to Cart
Micro servo - SG92R $5.95 Tiny little servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to... Add to Cart
Adafruit Micro Lipo - USB LiIon/LiPoly Charger - v1 $5.95 Oh so adorable, this is the tiniest little lipo charger, so handy you can keep it any project box! It's also easy to use. Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into... Notify Me