Adafruit 997 - Plastic Water Solenoid Valve - 12V - 1/2" Nominal  Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening...

Simple but effective - this sewable breakout board has a CR2032 coin cell battery holder soldered on and 0.1" pitch breakout pins for easy connecting. Great for powering very low-current projects, or...

When working with unusual non-header-friendly surfaces, these handy cables will be your best friends! No longer will you have long, cumbersome strands of alligator clips. These compact jumper cables...

Adafruit 780 - Diffused Blue 3mm LED (25 pack) Need some indicators? We are big fans of these diffused blue LEDs, as featured in the LoL shield. They are really bright so they can be seen in...

Pimoroni PIM729 - An all-in-one, USB-C powered controller for WS2812/Neopixel and APA102/Dotstar addressable LED strips. Now with added wireless connectivity! Plasma 2350 W is powered and...

Punch in your secret key into this numeric matrix keypad. This keypad has 12 buttons, arranged in a telephone-line 3x4 grid. It's made of a thin, flexible membrane material with an adhesive backing...

These two Short Female Headers alone are, well, lonely. But pair them with any Adafruit Feather boards and you're in business! These headers are particularly cute and tiny with a body height of just...

Finally Adafruit gets their very own super sweet sixteen... 16 millimeters that is! The Black Plated M/F Brass 16mm Standoffs are engineered specifically to keep your PiTFT or other Pi accessories...

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber...

A handy extension cord for JST-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH socket, and the other end has a matching plug. Between the two, 500mm of...

Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 350mAh for...

"Is it not a strange fate that we should suffer so much fear and doubt for so small a thing? So small a thing!!" – Boromir, The Lord of the Rings That Raspberry Pi camera or display (CSI/DSI)...

If you're looking for the most compact li'l color display for a Raspberry Pi B+, Pi 2, & Pi 3 (most likely a Pi Zero) project, this might be just the thing you need! The Adafruit Mini PiTFT -...

Need some really bright LEDs? We are big fans of these white LEDs. They are very bright and have about 20degree LED beam. They go easily into a breadboard and will add that extra zing to your project...

Mini PIR Motion Sensor – Breadboard Friendly with 3-Pin Header – Compact motion detection for projects PIR sensors are used to detect motion from pets/humanoids from about 5 meters away (possibly...

This potentiometer is a two-in-one, good in a breadboard or with a panel. Its a fairly standard linear taper 10K ohm potentiometer, with a grippy shaft. Its smooth and easy to turn, but not so loose...

This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have...

These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch no matter what size...

This power jack is designed to fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project. We went for the more expensive "thin pin" type which snap into...

These are our favorite trimpots, perfect for breadboarding and prototyping. They have a long grippy adjustment knob and with 0.1" spacing they plug into breadboards or perfboards with ease. This is...