Pimoroni

A hackable, programmable badge with E Ink® display, powered by Raspberry Pi RP2040 - Badger Only In honour of Raspberry Pi's 10th birthday, we've fused a RP2040 microcontroller with an EPD...

A postage stamp sized RP2040 development board with a USB-C connection, perfect for portable projects, wearables, and embedding into stuff. While we love the Raspberry Pi Pico we also wanted...

A sophisticated, hackable, 32x24 pixel thermal camera breakout! Use it to monitor the temperature of your CPU or coffee pot, or to build your own heat-seeking night vision camera. Works with...

Enter the (LED) matrix with this all-in-one, USB-C powered controller for HUB75 panels. Interstate 75 is a RP2040-based driver board for HUB75-style LED matrices. It's designed to plug neatly into...

A top of the line Pirate-brand RP2040-powered microcontroller with lots of flash memory, USB-C, STEMMA QT/Qwiic and debug connectors... and built in LiPo charging! We adore the versatility and value...

A versatile, mid-level robot learning platform for Raspberry Pi. Trilobot is a sturdy Raspberry Pi-based robot kit, designed with educational use in mind. It's straightforward to get started with,...

Crisp, high-res, with great viewing angles (IPS), this 1.3" square, 240x240 pixel, colour LCD will add some pizzazz to your Raspberry Pi or Arduino projects. The square form-factor of this display...

A top of the line Pirate-brand RP2040-powered microcontroller with lots of flash memory, USB-C, STEMMA QT/Qwiic and debug connectors... and built in LiPo charging! We adore the versatility and value...

Bold, will hold! A big, beautiful, 5.7" (600 x 448 pixel) 7 colour electronic paper display for Raspberry Pi. This display is considerably bigger than Inky wHAT (check out the comparison photo!)...

A super-simple, slimline way to hook up a hi-fi amp or powered speakers to your Raspberry Pi! Output punchy digital I2S audio whilst leaving your GPIO pins conveniently accessible. SHIM is a old...

A minimal RP2040 breakout board wrangled into a Pin Grid Array, with 8MB flash and a maximal dash of retraux style. PGA2040 is a compact RP2040 breakout intended for the most svelte and embeddable...

Protect your Pi Zero 2 W in style with the Pibow Zero 2 W case, in calming violet waters - ocean blue, purple, and deep blue! Raspberry Pi Zero 2 W is not included Note: this case is for the...

A postage stamp sized RP2040 development board with a USB-C connection, perfect for portable projects, wearables, and embedding into stuff. While we love the Raspberry Pi Pico we also wanted...

Raspberry Pi Pico and Pico Omnibus are not included A spacious 2.0" (320 x 240) IPS LCD display for Raspberry Pi Pico, with four buttons, an RGB LED and plenty of room for your Pico projects! This...

Raspberry Pi Pico is not included A conveniently sized, labelled proto-board add-on for your Raspberry Pi Pico, perfect for permanently attaching your custom circuits! With a 6x20 grid of 2.54mm...

A handy little cable that connects to the JST connector on the underside of HyperPixel 4.0, allowing you to use I2C devices with your Raspberry Pi at the same time as the display. Note:...

A vibrant, highly concentrated 4" (640 x 400 pixel) 7 colour electronic paper display for Raspberry Pi. New ePaper screens just keep getting better! We can't resist them with their delicious...

A meteorologically minded Raspberry Pi HAT designed to make hooking up weather sensors a breeze (or a squall, or a gale). Weather HAT is a tidy all-in-one solution for hooking up climate and...

A uniquely square, high-resolution, high-speed, 4.0" display with optional touchscreen for Raspberry Pi – it's hip to be square! HyperPixel 4.0 Square has all the great features of our...

Want to use your new Official Raspberry Pi 7" Touchscreen Display but need to keep your GPIO pins free? This handy little cable is just what you need! We love the Raspberry Pi touchscreen but...