Categories - PiShop.us

Sub Categories

DRV8825 Stepper Motor Driver Carrier, High Current

$7.95

This version of the DRV8825 Stepper Motor Driver Carrier ships with 0.1″-pitch male header pins installed as shown in the main product picture, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. This...

Notify Me

Raspberry Pi GPIO Kit

$12.95 $19.95

This kit has been discontinued, but is replaced by the following two separate kits: CamJam EduKit 1 – Starter CamJam EduKit 2 – Sensors The contents of the GPIO kit and CamJam 1+2 are identical.

Notify Me

Pi Zero USB Stem

$6.95

The Zero Stem is a PCB shim that turns a Raspberry Pi Zero into a USB dongle. Once the shim is installed, your Raspberry Pi can be plugged directly into a computer or USB hub without any additional cables or power supplies. The Zero Stem is compatible...

Add to Cart

Camera Cable Joiner/Extender for Raspberry Pi

$3.50

The Raspberry Pi camera module comes with its own 30cm cable to connect to the Pi, but sometimes that’s simply not long enough. This lovely little board lets you add extension cables to your existing camera cable, giving you as much range as...

Notify Me

Acrylic case for MiniBoss

$7.95 $14.95

Please note that due to supply shortages the acyrlic case stock for this product is now solid black instead of transparent black as shown in the product images. Acrylic Case for miniBOSS For RPi Zero! IMPORTANT - Each acrylic case piece is covered...

Notify Me

Pimoroni Picade - BYO Screen

$104.95 $154.95

Right from our attic, the legendary Pimoroni Picade - BYO Screen, Brand NEW, sealed in its packaging - ONLY COMPATIBLE WITH RPi 3 or RPi 3B+ THIS KIT CONTAINS NO SCREEN. GO HERE FOR THE KIT WITH 8" SCREEN. The Picade comes in kit form...

Add to Cart

PiTFT Plus Pibow Case Only (for Pi 2, 3B, 3B+)

$19.95

Support and protect your PiTFT+ and Raspberry Pi with this stylish and unique case! Please note: if using with the 480×320 3.5″ PiTFT+ you will need to remove the mounting holes from the side of the PiTFT board (they’re designed to...

Notify Me

BitScope Blade Rack

$199.95 $225.95

Make sure to check all of our cool BitScope products! The BitScope Blade Rack is a 1RU server built with Quattro Pi. It is populated with up to four Raspberry Pi and includes a built-in five port network switch. BR04A is...

Notify Me

Raspberry Pi 3 B + (Plus) Basic Bundle

$52.95

The new Pi3B+ board features the same processor as before, however it’s configured differently in the firmware. This means that previous OS images that you ran on your Pi3B will not run on the new processor! Raspbian is the first OS to...

Notify Me

Raspberry Pi PoE HAT

$20.00

This version is no longer in production, please see the newer POE plus here. This version of the PoE HAT is unaffected by the "underachieving USB current" syndrome. Important note: Not all Pi cases are PoE HAT compatible. Please check short video...

Notify Me

Raspberry Pi 3 B+ (PLUS) Starter Kit

$68.95

If this is your first Pi or meant to be gifted, please see our Raspberry Pi Kit – Quick Start Guide. Our starter kits are ideal for those that: Want to start using a Raspberry Pi Are looking to play with and learn the Raspbian OS Enjoy...

Notify Me

Raspberry Pi 3 B + (Plus) Budget Kit

$57.95

If this is your first Pi or meant to be gifted, please see our Raspberry Pi Kit – Quick Start Guide. The Budget Kit includes the latest model Raspberry Pi - Model 3B+ (Plus), and contains most of the essentials to make a functional Raspberry...

Notify Me

Butterfly PCB

$2.95

Allows two HAT or pHAT (or a mix) to be attached to a single Raspberry Pi 40 way connector. All pins are connected *except* ID_SD and ID_SC (HAT EEPROM) which have solder jumpers – this allows HAT which follow the specification correctly...

Add to Cart

Raspberry Pi Camera case Black - For Pi Camera V2

$3.45 $4.45

CAUTION! This case is NOT compatible with the new Raspberry Pi Camera V3 modules.This is an elegant and innovative protective case designed specifically for the Raspberry Pi Camera. The case is a two-piece injection-moulded ABS enclosure that snaps...

Notify Me

Cluster HAT Kit (includes 4 x Raspberry Pi Zero W)

$132.95 $140.70

The Cluster HAT is the perfect tool for modelling, testing and teaching small scale clusters. The Cluster HAT is designed to interface a controller (Raspberry Pi A+/B+/2/3/4) with 4 Raspberry Pi Zero's configured to use USB gadget mode.This Kit...

Notify Me

Sleepy Pi 2 - MicroUSB

$54.95

This is the latest version of Sleepy Pi Board - Sleepy Pi 2. Maximize the Battery Life on your Raspberry Pi Raspberry Pi add-on board for Smart Power Management and additional GPIO. Run Raspberry Pi on Battery Power Extend RPi battery life from...

Notify Me

Pre-Assembled Female BNC

$12.35

Pre-Assembled Female BNC Connector Low profile Gold plated Brass Includes washer and nut Designed for RF applications Right angle 50ohm impedance Designed to be easily connected into a breadboard for rapid developmen Downloads: BNC...

Notify Me

Google AIY Voice Kit for Raspberry Pi

$25.95 $34.95

Need directions to your nearest dry cleaner? Or maybe you need to send a hands-free email? Perhaps you just want to know what the weather’s like in Timbuktu. Ask your new little friend – the Google AIY Voice Bot! Google AIY Projects...

Notify Me

BeoCreate 4-Channel Amplifier

$199.95

The Beocreate is a joint project between audio legends Bang & Olufsen and HiFiBerry. It is a very flexible 4-Channel DSP/DAC/amplifier combination board designed for high-quality music playback in combination with passive...

Add to Cart

Cluster HAT v2.5

$37.95

Cluster Hat Version 2.5 The Cluster HAT is also available in a Cluster Kit (comes with 4 Raspberry Pi Zero W) The cluster HAT is physically compatible with the Raspberry Pi Zero 2, but the Zero 2 can consume up to 1.1A, it is not known yet how many Pi...

Notify Me