Categories - PiShop.us

Sub Categories

2.4GHz/5.8GHz Antenna kit for Compute Module

$6.95

Raspberry Pi SC0480 | Antenna Kit for CM4/CM5 CM4 variants that include the onboard wireless module (CM41xxxxx) provide an onboard PCB antenna, and a U.FL connector which allows an optional external antenna to be used. The...

Add to Cart

Raspberry Pi Compute Module CM4 IO Board

$38.50

Raspberry Pi Compute Module CM4 IO Board - SC0326Like the IO boards for earlier Compute Module products, this breaks out all the interfaces from the Compute Module to standard connectors, providing a ready-made development platform and a starting...

Add to Cart

enviro:bit

$29.95

Sense the world around you with enviro:bit! It's loaded with sensors for air and weather, colour and light, and sound, and slots right onto your micro:bit. Just slot in your micro:bit, then code enviro:bit with the block-based Microsoft...

Notify Me

Stacking Header for Pi A+/B+/Pi 2/Pi 3 - 2x20 Extra Tall

$2.95

Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made extra-tall and extra-long 2x20 female header. The female header part has extra spaces to make it 23.5 mm tall: when placed on your Pi, a PCB will clear the...

Add to Cart

GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header

$1.95

This 'shorty' 2x20 header is great for a slim connection to your Raspberry Pi model A+ or B+, it's basically the through-hole version of the SMT GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header. This header is for super-slim...

Add to Cart

Pirate Audio: Headphone Amp for Raspberry Pi

$25.95

The ultimate hackable headphone amp for your desk! Pirate Audio Headphone Amp for Raspberry Pi has an I2S DAC, headphone amplifier, high-res display, and playback control buttons. Build your own home-brew iPod Nano with Pirate...

Add to Cart

SanDisk High Endurance MicroSDXC Card - 64GB - Class10 - BLANK

$34.95

SanDisk High Endurance microSD Card - MicroSDXC UHS-I Card 64GB Ideal for dash cams and home monitoring systems Record for thousands of hours with no worries Record in Full HD or 4K for more detail Save time with quick transfer speeds of up to...

Add to Cart

CR1220 3V Coin Cell Battery

$0.95

BATTERY CHEMISTRY LithiumBATTERY FEATURE Primary (Disposable)BATTERY FORM FACTOR CR1220BATTERY RATED VOLTAGE 3 V DIAMETER 12.5 mmDEPTH 2 mmPRODUCT WEIGHT 0.8 g

Add to Cart

SSQ-102-02-T-D

$0.69

Features Application: Single, double and triple row up to 150 pins Contact System: Tiger Buy™ Orientation: Vertical, right-angle Pitch: .100" (2.54 mm) Special Features: Standard and low insertion force contacts with .025" (0.635 mm) square...

Notify Me

Pycom LTE-M Antenna Kit

$9.45 $10.90

External LTE-M Antenna Kit for use with the FiPy and GPy development boards. Specification Frequency: 703~803/2520~2620(MHz) Antenna size: 75 x 21 (mm) PCB 0.6 mm LTE Low bands (5, 8, 12, 13, 18, 19, 20, 28) Tx...

Add to Cart

Pycom FiPy

$65.88

Five networks in one small board; the Micropython-programmable FiPy takes up the same footprint as our other boards. Featuring WiFi, Bluetooth, LoRa, Sigfox and dual LTE-M (CAT-M1 and NB-IoT), the FiPy gives access to global LPWAN networks. NOTE: The...

Notify Me

Pycom Pygate Case

$11.45 $15.45

Meet our new Pygate case. It will fit your Pygate in perfectly. It’s a translucent smokey colour, made from a polycarbonate material. Pygate is an 8-channel LoRaWAN gateway. Connect your WiPy 3...

Add to Cart

Pycom Pygate with PoE

$99.90

Pygate is an 8-channel LoRaWAN gateway. Connect your WiPy 3.0, LoPy4 and GPy and hook up any other Pycom devices and voila – a decentralised IoT network. NOTE: Just add a WiPy, LoPy4 or GPy to provide the processing...

Notify Me

Pycom Pysense 2.0 X

$32.89

Pysense 2.0 X is a new sensor shield which can be used with any Pycom multi-network modules. It fits with all Pycom boards and contains a number of sensors, such as ambient light, pressure and humidity. It’s got a ton of new features including a 6...

Notify Me

Pycom GPy

$53.68

UPGRADED CALIBRATION AND EXTENDED BANDS The GPy is our Micropython-programmable triple bearer. Different from its SiPy counterpart, the GPy offers WiFI, BLE and cellular CAT-M1/NB1. Create and connect your things everwhere. **IMPORTANT NOTE: As of...

Notify Me

Rainbow - 64

$14.95 $20.00

Light up your Raspberry Pi with Allo! Ideal for mood lighting and pixel art. Features 64 RGB LEDs LEDs are driven by PWM over DMA Compatible with: Pi 3, 2, B+, A+, Zero, and Zero W Support & Downloads GitHub Rainbow-HAT uses some special...

Notify Me

Volt+ with Stepped Attenuator

$68.95

Please note that due to supply shortages the acyrlic case stock for this product is now solid black instead of transparent black as shown in the product images. This is the VOLT+ With Stepped Attenuator. Includes VOLT+ Amp + Stepped Attenuator + Acrylic...

Add to Cart

Acrylic Case For RPi 4B + DigiOne - Black

$14.95

Please note that due to supply shortages the acyrlic case stock for this product is now solid black instead of transparent black as shown in the product images. Features Acrylic Case for Raspberry Pi + DigiOne Protects your components...

Notify Me

2.1mm to 2.5mm DC-to-DC Adapter

$1.95

This adapter allows you to use a 5.5 x 2.1mm DC power supply for a device that requires a 5.5 x 2.5mm power supply. Many of Allo's older audio boards feature the larger 2.5mm size, but their newer boards (2020) and Audio Power Supplies are all the more...

Add to Cart

Analog 2-axis Thumb Joystick with Select Button

$2.45

This thumbstick is an analog joystick - more accurate and sensitive than just 'directional' joysticks - with a 'press in to select' button. Since it's analog (potentiometers), you'll need two analog reading pins on your microcontroller to determine X...

Add to Cart