2.4GHz/5.8GHz Antenna kit for Compute Module $5.95 CM4 variants that include the onboard wireless module (CM41xxxxx) provide an onboard PCB antenna, and a U.FL connector which allows an optional external antenna to be used. The kit has been pre-certified for use with CM4. Antenna... Add to Cart
Raspberry Pi Compute Module CM4 IO Board $38.50 Raspberry Pi Compute Module CM4 IO Board - SC0326Like the IO boards for earlier Compute Module products, this breaks out all the interfaces from the Compute Module to standard connectors, providing a ready-made development platform and a starting... Add to Cart
Allo Kali Reclocker, 44/48 Mhz $64.95 Compatible with Raspberry PI B+\2\3 and with Sparky SBC. Kali will reclock your Audio signal with its high quality crystal, and provide clean power to both PI/Sparky SBC and an attached DAC. The results will blow you away! Kali The Goddess of... Notify Me
Pimoroni Pirate Radio $54.95 Build your very own internet-connected radio with the Pirate Radio Kit! Updated version! The kit now includes a Raspberry Pi Zero WH and the audio board now includes a pre-soldered header. No soldering required! This kit has everything* you'll need,... Notify Me
enviro:bit $29.95 Sense the world around you with enviro:bit! It's loaded with sensors for air and weather, colour and light, and sound, and slots right onto your micro:bit. Just slot in your micro:bit, then code enviro:bit with the block-based Microsoft... Add to Cart
Stacking Header for Pi A+/B+/Pi 2/Pi 3 - 2x20 Extra Tall $2.95 Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made extra-tall and extra-long 2x20 female header. The female header part has extra spaces to make it 23.5 mm tall: when placed on your Pi, a PCB will clear the... Add to Cart
GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header $1.95 This 'shorty' 2x20 header is great for a slim connection to your Raspberry Pi model A+ or B+, it's basically the through-hole version of the SMT GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header. This header is for super-slim... Add to Cart
Pirate Audio: Headphone Amp for Raspberry Pi $25.95 The ultimate hackable headphone amp for your desk! Pirate Audio Headphone Amp for Raspberry Pi has an I2S DAC, headphone amplifier, high-res display, and playback control buttons. Build your own home-brew iPod Nano with Pirate... Notify Me
SanDisk 64GB High Endurance MicroSDXC Card - BLANK $10.95 SanDisk High Endurance microSD Card - MicroSDXC UHS-I Card 64GB Ideal for dash cams and home monitoring systems Record for thousands of hours with no worries Record in Full HD or 4K for more detail Save time with quick transfer speeds of up to... Add to Cart
CR1220 3V Coin Cell Battery $0.95 BATTERY CHEMISTRY LithiumBATTERY FEATURE Primary (Disposable)BATTERY FORM FACTOR CR1220BATTERY RATED VOLTAGE 3 V DIAMETER 12.5 mmDEPTH 2 mmPRODUCT WEIGHT 0.8 g Add to Cart
SSQ-102-02-T-D $0.69 Features Application: Single, double and triple row up to 150 pins Contact System: Tiger Buy™ Orientation: Vertical, right-angle Pitch: .100" (2.54 mm) Special Features: Standard and low insertion force contacts with .025" (0.635 mm) square... Add to Cart
PiJuice Solar Panel - 22 Watt $125.95 The PiJuice 22 Watt Solar panel is the ideal way to charge and/or power your PiJuice HAT and Raspberry Pi for free when you’re in a sunny location. By using a solar panel and PiJuice, containing our revolutionary PiAnywhere technology,... Notify Me
Pycom LTE-M Antenna Kit $9.45 $10.90 External LTE-M Antenna Kit for use with the FiPy and GPy development boards. Specification Frequency: 703~803/2520~2620(MHz) Antenna size: 75 x 21 (mm) PCB 0.6 mm LTE Low bands (5, 8, 12, 13, 18, 19, 20, 28) Tx... Add to Cart
Pycom Expansion Board 3.1 $18.90 Expansion Board 3.0 Introducing the Expansion Board 3.0, compatible with the WiPy 3.0, LoPy4, SiPy, FiPy and GPy. NOTE: Does not include the WiPy Features USB and LiPo battery powered Custom PIC USB to serial converter... Notify Me
Pycom FiPy $58.45 $64.90 Five networks in one small board; the Micropython-programmable FiPy takes up the same footprint as our other boards. Featuring WiFi, Bluetooth, LoRa, Sigfox and dual LTE-M (CAT-M1 and NB-IoT), the FiPy gives access to global LPWAN networks. NOTE: The... Notify Me
Pycom Pygate Case $7.95 $11.90 Meet our new Pygate case. It will fit your Pygate in perfectly. It’s a translucent smokey colour, made from a polycarbonate material. Pygate is an 8-channel LoRaWAN gateway. Connect your WiPy 3... Add to Cart
Pycom Pygate with PoE $85.45 $94.90 Pygate is an 8-channel LoRaWAN gateway. Connect your WiPy 3.0, LoPy4 and GPy and hook up any other Pycom devices and voila – a decentralised IoT network. NOTE: Just add a WiPy, LoPy4 or GPy to provide the processing... Add to Cart
Pycom Pysense 2.0 X $31.45 $34.90 Pysense 2.0 X is a new sensor shield which can be used with any Pycom multi-network modules. It fits with all Pycom boards and contains a number of sensors, such as ambient light, pressure and humidity. It’s got a ton of new features including a 6... Notify Me