Categories - PiShop.us

Sub Categories

OV2710 2MP USB Camera (A), Low-light Sensitivity

$39.95

Waveshare 14121 - OV2710 2MP USB Camera, Better Sensitivity In Low-Light Condition, Driver-Free Features 2 megapixel OV2710 sensor 1920x1080 resolution USB interface, UVC protocol, driver-free, plug-and-play Supports Raspberry Pi and Jetson...

Notify Me

SparkFun Qwiic micro:bit Breakout (with Headers)

$6.45

There is no micro:bit included with this breakout; it will need to be purchased separately The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access...

Add to Cart

Raspberry Pi 4B-2GB Ultimate Kit with 64GB SD Card

$139.95

PiShop's Raspberry Pi 4B-2GB Ultimate Kit with 64GB SD Card Our Ultimate Kit is ideal for those who: Want to explore the Raspberry Pi's many GPIO (General Purpose Input-Output) capabilities! Start tinkering with buttons and lights Move onto home...

Notify Me

Inductive Proximity Sensor Switch - 3 Wires - LJ12A3-4-Z/BX

$3.95

Model : LJ12A3-4-Z/BXSensor Type: InductiveOutput Type : Normally OPEN (NPN)Cable Length: 1m (approx.)Detecting Distance : 4mm (May vary slightly by material)Detecting Object : MetalSupply Voltage : DC 6-36VCurrent Output : 300mAResponse Frequency :...

Add to Cart

DIGI2 Pro Rev 2.2

$54.95

This new Digi2 is a revised version of the Digi+ model which is compatible with both the Pi4 rev. 1.5 and backwards. The new design features a second GPIO header that accommodates our add-on boards and has all the same features as our original model...

Add to Cart

Ring:bit Car v2 Kit – Micro:bit Educational Smart Robot Kit (without micro:bit board)

$26.95

The ELECFREAKS Ring:bit Car Kit V2 is a small DIY smart car driven by the BBC micro:bit and the ELECFREAKS Ring:bit. A basic Ring:bit Car can be easily programmed to run autonomously, with a remote control, and even create rainbow beacons of light. Just...

Choose Options

Smart Coding Kit: Wearable power supply extension kit for micro:bit (without micro:bit board)

$9.85

Elecfreaks Smart Coding Kit is a wearable device based on micro:bit button cell extension board Pro, a DIY micro:bit watch can be easily made with a simple installing method. Easy Installation Only need 4 simple steps, you can easily complete the...

Choose Options

Smart Cutebot Kit : Smart Car Robot kit for micro:bit (without micro:bit board)

$29.45

ELECFREAKS Cutebot is a rear-drive smart car driven by dual high speed motors. There are many on-board equipments on the Cutebot including ultrasonic sensor and distance sensor, two RGB LED headlights and clearance lamps on the bottom, two line-tracking...

Choose Options

AMP100

$109.95

Power supply is not included The HiFiBerry AMP100 has been designed with more demanding speaker loads in mind. Just as with our other products, this new model features an improved signal path based on our DAC2 Pro section, but benefits from higher power...

Add to Cart

Pico Unicorn Pack

$25.95

A Raspberry Pi Pico is not included A sparkly matrix of over a hundred fantabulous RGB LEDs for all your rainbow needs and some handy buttons - sized perfectly for the Raspberry Pi Pico! Unicorn setup is resized so that it fits nicely on the back of...

Add to Cart

Infra-red Multimedia Remote with USB Receiver

$9.95 $12.95

This is a multimedia remote for any PC or Raspberry Pi. It works through infra-red with an infra-red receiver (up to 18 meters of range) that is plugged into one of the Pi's USB ports. What makes this remote special is that it looks like a standard TV...

Add to Cart

Octopus Analog Photocell Brick Adjustable Sensitivity

$2.95

Adjustable sensitivity Analog Photocell Brick allow you to adjust sensitivity of analog Photocel to get digital signal or set a trigger value. Characteristics The 3-pins ports is easy to plug and play. Specifications Item | Parameter :-: | :-:...

Add to Cart

SanDisk 32GB High Endurance MicroSDXC Card - BLANK

$8.95

SanDisk High Endurance microSD Card - MicroSDXC UHS-I Card 32GB Ideal for dash cams and home monitoring systems Record for thousands of hours with no worries Record in Full HD or 4K for more detail Save time with quick transfer speeds of up to...

Add to Cart

SparkFun Beginner Tool Kit

$62.95

This assortment of tools has everything you need to get started tinkering with Sparkfun products and beyond! The kit specifically caters to those of you who are new to soldering. Sparkfun has found their favorite, low-cost and easy to transport tools,...

Notify Me

Flex Cable for Raspberry Pi Camera - 15cm / 6"

$2.45

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.

Add to Cart

Waveshare 18396 - 5inch Capacitive Touch Display For Raspberry Pi, 800×480, DSI Interface - 5inch DSI LCD

5inch Capacitive Touch Display for Raspberry Pi, DSI Interface, 800×480

$42.95

Waveshare 18396 - 5inch Capacitive Touch Display For Raspberry Pi, 800×480, DSI Interface - 5inch DSI LCD Features Size: 5" Resolution: 800×480 Display Port: DSI Power Consumption: Low Power Touch Type: Capacitive Touch Points:...

Add to Cart

Sense HAT (B) for Raspberry Pi

$26.95

Waveshare 16864 - Sense HAT (B) For Raspberry Pi, Onboard Multi Powerful Sensors, Supports External Sensors - Sense HAT (B) Raspberry Pi and external sensors are NOT included Overview The Sense HAT (B) is specially designed for Raspberry Pi,...

Add to Cart

2.8″ Touch Screen Expansion For CM4, with Interface Expander

$69.95

Waveshare 21435 - 2.8″ Touch Screen Expansion For Raspberry Pi Compute Module 4, Fully Laminated Display, Gigabit Ethernet, USB2.0, Optional Interface Expander Fully Laminated Touch Screen: 2.8″ Display With 5-Point Capacitive Touch Control,...

Add to Cart

Nano Base Board (A) for Raspberry Pi Compute Module 4

$24.95

Waveshare 21634 - Nano Base Board (A) For Raspberry Pi Compute Module 4, Same Size As The CM4 - CM4-NANO-A Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products Same Size As The CM4: Standard CM4 Socket, With...

Add to Cart

Nano Base Board (B) for Raspberry Pi Compute Module 4

$25.95

Waveshare 21726 - Nano Base Board (B) For Raspberry Pi Compute Module 4, Same Size As The CM4 Specifications CM4 socket suitable for all variants of Compute Module 4 Networking Gigabit Ethernet RJ45 connector Connector Raspberry Pi 40PIN...

Add to Cart