Maker Essentials - Various Headers $8.95 If you're going to be adding and removing wires to a project, these 2.54 pitch headers are an ideal way to make it easy and reliable. This box has a useful selection. Includes 2x male 2.54mm 2x20 header 10x male 2.54mm 1x20 header 4x male 2.54mm... Add to Cart
10.4inch QLED Quantum Dot Display, Capacitive Touch, High Brightness, 1600×720, Optical Bonding Toughened Glass Panel, HDMI Interface $127.95 Waveshare 24593 - 10.4inch QLED Quantum Dot Display, Capacitive Touch, High Brightness, 1600×720, Optical Bonding Toughened Glass Panel, HDMI Interface - 10.4HP-CAPQLED Size: 10.4″ Resolution: 1600×720 Display... Add to Cart
SanDisk 256GB Max Endurance MicroSDXC Card - BLANK $43.95 Designed for home security cameras and dash cams, the 256GB MAX ENDURANCE UHS-I microSDXC Memory Card from SanDisk has been engineered with long-lasting endurance so you can record and re-record for up to 120,000 hours. This card also features a storage... Add to Cart
Sense HAT Case for Raspberry Pi 4 $11.95 Designed to protect your Raspberry Pi and Sense HAT whilst giving you a full view of the RGB LEDs, the case also includes access to the Sense HAT joystick as well as cut-outs for the Sense HAT sensors. You also maintain full access to the Raspberry Pi's... Notify Me
Challenger TFT Kit $21.95 The Challenger TFT kit contains all the building blocks you need to create beautiful display solutions with your Challenger MCU board. The main attraction of the kit is the big 2,6″ LED backlit transmissive TFT display capable of producing 262... Add to Cart
Challenger RP2040 UWB $57.95 The Challenger RP2040 SubGHz board is an Arduino/Circuitpython compatible Adafruit Feather format micro controller board based on the Raspberry Pico (RP2040) chip. We wanted to start playing around with ultra wide band (UWB) radios and positioning so we... Add to Cart
Challenger RP2040 NFC + NFC Antenna $23.95 Please note that this is a kit consisting of both the Challenger RP2040 NFC board and a 13.56MHz NFC Antenna. The Challenger RP2040 NFC is a small embedded computer, equipped with an advanced on-board NFC controller (NXP PN7150), in the popular Adafruit... Add to Cart
868/915MHz Flexible ISM Band Antenna $6.95 This antenna is perfect for use together with our Lora as well as our SubGHz boards. It is a 43.5mm by 20mm flex PCB antenna with double sided tape on the backside making it perfect for mounting inside of an enclosure. It has been designed specifically... Add to Cart
LoRa Antenna 915 MHz Black $6.95 This is a 170mm long 915MHz 50ohm antenna kit targeted for use with our LoRa and SubGHz products. The antenna can tilt and swivel making it easy to install it in various applications. The kit also comes with a RF cable assembly containing an SMA... Notify Me
Challenger RP2040 SubGHz (915MHz) $15.95 The Challenger RP2040 SubGHz board is an Arduino/Circuitpython compatible Adafruit Feather format micro controller board based on the Raspberry Pico (RP2040) chip. This is a spin-off from our Challenger RP2040 LoRa board but in this case we replaced the... Notify Me
Challenger RP2040 LoRa (915MHz) $22.95 The Challenger RP2040 LoRa is an Arduino/Circuitpython compatible Adafruit Feather format micro controller board based on the Raspberry Pico (RP2040) chip. This is a spin-off from our Challenger RP2040 WiFi board but we have replaced the WiFi module... Add to Cart
FS90 Analog Micro Servo $5.95 This is a great general purpose-actuator for tiny mechanisms. The FS90 offers positive control over a 120 degree angle. Operating angle controlled by standard servo pulses between 900us and 2100us. Has a three wire connector for the power,... Add to Cart
Breakout Garden for Raspberry Pi (I2C) $14.95 Grow your projects on Breakout Garden. It's the easiest way to use breakouts with your Raspberry Pi. There's no soldering required, just pop up to six Pimoroni breakouts (6x I2C only) into the slots on Breakout Garden and get started coding and creating... Add to Cart
MLX90640 Thermal Camera Breakout - Wide Angle $63.95 A sophisticated, hackable, 32x24 pixel thermal camera breakout! Use it to monitor the temperature of your CPU or coffee pot, or to build your own heat-seeking night vision camera. Works with Raspberry Pi or Arduino. It's perfect for building into... Add to Cart
LED SHIM $9.95 28 tiny RGB LED pixels in a single row that just slip right onto your Pi's pins, no soldering required! LED SHIM is ideal for status updates, notifications, a VU meter, or as a bar graph for sensor readings. The really nifty thing about LED SHIM is that... Notify Me
Kitronik Environmental Control Board for BBC micro:bit $28.95 Unlock the secrets of nature with code, engineering, and the Environmental Control Board for micro:bit! The Kitronik environmental control board provides a variety of sensor inputs and connection points for the BBC micro:bit (V1 & V2) and provides... Add to Cart
Kitronik Compact 16 Servo Driver Board for the BBC micro:bit $12.95 Take your robotics project to the next level with the Kitronik compact 16 servo driver board for the BBC micro:bit. This board allows up to 16 Remote Control (RC) servos to be driven simultaneously. It is based on the PCA9685 driver IC. The board... Add to Cart
Kitronik Air Quality and Environmental Board for micro:bit $42.95 Monitor and analyse the air you breathe with the Kitronik Air Quality Board. Great for home and the classroom. The Kitronik Air Quality Board provides a complete air monitoring and reporting solution for the BBC micro:bit. The wealth of onboard sensors... Add to Cart
Kitronik Terminal Block Breakout for BBC micro:bit $12.95 The Terminal Breakout board for the BBC microbit does exactly what it says on the tin. It breaks out all of the signal and power pins on the microbit to user friendly terminal blocks. No more untangling M/M or M/F jumper cables from the hastily tidied... Add to Cart