Adafruit

This massive multimeter has everything but the kitchen sink included. It's a great addition to any workbench or toolbox.  It's low cost, simple to use, and has a big clear display with all the...

Pipe audio in or out of your project with this very handy breadboard-friendly audio jack. It's a stereo jack with disconnect-switches on Left and Right channels as well as a center ground pin. You...

Its a mini panel-mountable HDMI monitor with a built-in resistive touchscreen! So small and simple, you can use this display with any computer that has HDMI output, and the shape makes it easy to...

This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but still have a nice latching...

This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a...

Adafruit 3255 - Small Alligator Clip to Male Jumper Wire Bundle - 12 Pieces For bread-boarding with unusual non-header-friendly surfaces, these cables will be your best friends! No longer will you...

Adafruit 6252 - Snap-on Enclosure for Raspberry Pi Pico,  Pico W, Pico 2, Pico 2W Here is a cute and minimal enclosure for your Pi Pico to keep it safe during use and transport. This...

Looking for an ultra-thin heat sink for your Raspberry Pi 3? Check out this nice and slim 13x13x3mm Heat Sink! This heat sink is made from high quality aluminum and will work perfectly...

A button is a button, and an LED is a LED, but this LED illuminated button is a lovely combination of both! It's a medium sized button, large enough to press easily but not too big that it gets in...

When working with unusual non-header-friendly surfaces, these handy cables will be your best friends! No longer will you have long, cumbersome strands of alligator clips. These compact jumper cables...

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared with the chunkier JST-PH these are...

Adafruit 1554 - PCB Ruler v2 - 6" The first time you soldered up a surface mount component you may have been surprised "these are really small parts!" and there's dozens of...

Adafruit 3296 - DS1307 Real Time Clock Assembled Breakout Board This is a great battery-backed real time clock (RTC) that allows your microcontroller project to keep track of time even if it is...

Adafruit 996 - Brass Liquid Solenoid Valve - 12V - 1/2 Inch G / BSP Thread Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your...

Adafruit 997 - Plastic Water Solenoid Valve - 12V - 1/2" Nominal  Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening...

Little clicky switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderless breadboard as shown in this tutorial. The pins are normally...

Simple but effective - this sewable breakout board has a CR2032 coin cell battery holder soldered on and 0.1" pitch breakout pins for easy connecting. Great for powering very low-current projects, or...

When working with unusual non-header-friendly surfaces, these handy cables will be your best friends! No longer will you have long, cumbersome strands of alligator clips. These compact jumper...

Adafruit 780 - Diffused Blue 3mm LED (25 pack) Need some indicators? We are big fans of these diffused blue LEDs, as featured in the LoL shield. They are really bright so they can be seen in...

Punch in your secret key into this numeric matrix keypad. This keypad has 12 buttons, arranged in a telephone-line 3x4 grid. It's made of a thin, flexible membrane material with an adhesive backing...