Raspberry Pi Radio Module 2 - SC1169 The Raspberry Pi Radio Module 2 is a compact wireless solution built for Raspberry Pi microcontrollers. Powered by Infineon's CYW43439 chip, it supports 2.4GHz Wi-Fi 4 (802.11n) and Bluetooth 5.2, making it...

Pimoroni PIM730 - Add 2.4GHz wireless and Bluetooth functionality to an existing project with this handy breakout featuring Raspberry Pi's RM2 module. RM2 uses the same two-in-one wireless and Bluetooth module that's found on Raspberry Pi Pico...

Techship PC201 Adapter (miniPCIe to USB-C, Dual SIM) - PC201 V1.0 (MP1)  Fast-forward the IoT transition with Techship’s PC201 adapter board. Designed to ease the integration of miniPCIe based cellular data cards in both new products and...

Techship MC201 Adapter - M.2 key B to USB-C, Dual SIM The Techship MC201 Adapter connects M.2 Key B modems (3052/3050/3042) to USB-C for fast integration. It supports 42, 50, and 52 mm cards with USB 3.1/3.0/2.0 interfaces. Dual Nano-SIM slots enable...

Adafruit 3072 - RFM95W LoRa Radio Transceiver Breakout - 868 or 915 MHz - RadioFruit "You see, wire telegraph is a kind of a very, very long cat.  You pull his tail in New York and his head is meowing in Los Angeles.  Do you...

This high performing LTE Swivel antenna comes with SMA-Male connector.  It is ground plane independent. Specifications Technology: 4G LTE, 3G, 2G Antenna Frequency: 698-960/1710-2170/2500-2700 MHz MHz VSWR: 1.7 :1 Mounting...

RF Interface cable 20 cm SMA/IPEX pigtail with SMA female bulkhead and U.FL connector. For most miniPCIe WWAN modules, RF 1.13 cable. Specs Connector Type: SMA-F, IPEX MHF/U.FL Cable Specification: 1.13 mm coax Cable length: 20...

The SIMCom SIM7600G-H R2 LTE CAT-4 mPCIe is Multi-Band LTE-TDD/LTE-FDD module solution in a mPCIe form factor. SIM7600G-H R2 is a LTE CAT4 module with support of up to 150Mbps downlink data transfer. With abundant application capability like...

USB to LoRa Dongle is a powerful and versatile USB to LoRa that lets you connect beyond boundaries. With its exceptional range and easy connectivity, it allows you to seamlessly communicate with devices up to 5 km away. LoRa Dongle is the perfect...

Introducing PiBeam, the ultimate USB IR Transceiver that revolutionizes the way you control your devices. Designed with convenience and versatility in mind, PiBeam supports all common remote control protocols, making it compatible with a wide range of...

Waveshare 24654 - SX1262 LoRaWAN Node Module Expansion Board For Raspberry Pi, With Magnetic CB Antenna, GNSS Function - SX1262 868/915M LoRaWAN/GNSS HAT Features This series of products are LoRa modules using the new generation of...

These Simple RF receivers are the easiest way possible to add wireless control, painlessly! There's no programming, configuring or addressing - simply power the receiver with ~5 VDC and press the buttons on your RF keyfob remote. When the A button is...

The Challenger RP2040 SubGHz board is an Arduino/Circuitpython compatible Adafruit Feather format micro controller board based on the Raspberry Pico (RP2040) chip. We wanted to start playing around with ultra wide band (UWB) radios and positioning so we...

Please note that this is a kit consisting of both the Challenger RP2040 NFC board and a 13.56MHz NFC Antenna. The Challenger RP2040 NFC is a small embedded computer, equipped with an advanced on-board NFC controller (NXP PN7150), in the popular Adafruit...

This antenna is perfect for use together with our Lora as well as our SubGHz boards. It is a 43.5mm by 20mm flex PCB antenna with double sided tape on the backside making it perfect for mounting inside of an enclosure. It has been designed specifically...

This is a 170mm long 915MHz 50ohm antenna kit targeted for use with our LoRa and SubGHz products. The antenna can tilt and swivel making it easy to install it in various applications. The kit also comes with a RF cable assembly containing an SMA...

The Challenger RP2040 SubGHz board is an Arduino/Circuitpython compatible Adafruit Feather format micro controller board based on the Raspberry Pico (RP2040) chip. This is a spin-off from our Challenger RP2040 LoRa board but in this case we replaced the...

The Challenger RP2040 LoRa is an Arduino/Circuitpython compatible Adafruit Feather format micro controller board based on the Raspberry Pico (RP2040) chip. This is a spin-off from our Challenger RP2040 WiFi board but we have replaced the WiFi module...

Let your project know its place in the world with this tiny but ultra-sensitive global positioning breakout! This I2C breakout houses a PA1010D GPS receiver module with inbuilt ceramic antenna, which will let you extract date and time, latitude,...

Includes 2x DF13 6-pin to 2.54 mm female jumpers for UART and ADC ports 1x DF13 4-pin to 2.54 mm female jumpers for I2C port Wire length: 200 mm