The perfect Raspberry Pi stocking filler this Christmas! The Christmas Tree solder kit is the designed for any maker or hacker and an ideal kit for people new to Raspberry Pi or even the experienced users who want to practice the art of soldering! The...

A complete toolkit with several components - Perfect to build, code, and play with your Raspberry Pi board! Compatibility Raspberry Pi 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero (sold separately) Includes 1x Solderless Prototype Breadboard...

Hey want to hear a really loud noise? Apply 3V to 5V to this buzzer module and you'll be rewarded with a loud 2KHz BEEEEEEEEEEEEEEEEEP. Unlike a plain piezo, this buzzer does not need an AC signal. Inside is a piezo plus the driver circuitry that...

The Squid Combo Pack comprises a Raspberry Squid RGB LED, two Squid buttons and a Raspberry leaf to help you identify the GPIO pins. A bright RGB (Red, Green, Blue) LED with built-in resistors and female header leads that can just plug directly into the...

The Squid Button is a momentary action push switch with trailing leads that end in female header sockets that will fit over GPIO pins on a Raspberry Pi, Node MCU or Raspberry Pi Pico. To reduce the chance of accidental short-circuits when using the...

Bright RGB LED with built-in resistors Female header leads Plug directly into the GPIO pins of a Raspberry Pi The Monk Makes Squid RGB LED for Raspberry Pi is a bright RGB (Red, Green, Blue) LED with built-in resistors and female header...

This kit includes 2 servo motors and a Monk Makes ServoSix interface board for use with Raspberry Pi. It also includes a Raspberry Leaf GPIO template, a bunch of 10 female-to-female header pins and a 4xAA battery box Resources Instructions (PDF) Hi...

MONK MAKES - PROJECT BOX 1 FOR RASPBERRY PI The Project Box for Raspberry Pi contains all the components needed, to make 10 great electronic projects with your Raspberry Pi: Blinking LED Blinking two LEDs Color display using an RGB (Red,...

We got fed up with low quality, overly-long alligator clip leads, so we got some made to our specification. Our leads are supplied in a bundle of 10 leads. Two each of black, red, white, green and yellow. Each lead is 185mm (7.5 inches) long from tip to...

Connect your own PCB to a Raspberry Pi with this normal-height female header.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3mm of pins, compared with...

A 4-Way Riser perfect to use with the Raspberry Pi PoE HAT! SPECIFICATIONS Pitch: 2.54mm Gender of Connector: Female Number of Pins: 2 x 2 Pin Type of Row: Double-Row Body Orientation: Straight DIMENSIONS Overall Height: 11.2 mm Exposed...

Connect your own PCB to a Raspberry Pi and stack on top with this normal-height female header with extra long pins.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has extra...

If we could eat headers we’d have them for breakfast, lunch, and dinner. But we can’t : ( So we’re making the best of it and selling them! This 2×20-pin strip, right-angle female header is a perfect companion piece...

This is a cute half-size clear breadboard, good for small projects. It’s 2.2″ x 3.4″ (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to make the...

The Raspberry Pi is a wonderful little computer, but one thing it isn’t very good at is controlling DC Servo Motors – these motors need very specific and repetitive timing pulses to set the position. Instead of asking the Pi Linux kernel to...

This tiny DC Motor in Micro Servo Body is an interesting motor – it’s the same size and shape as our micro servo (like the FS90, FS90R, SG92R) but it isn’t a servo. It’s more like a DC motor + plastic...

Operating Voltage: 5V With LED indicates relay status Control terminal, low level pull, high level relay release Great for DIY project

Mini 170 Tie Points Prototype Solderless Breadboard Features With self-adhesive tape Suitable for electronic circuit assembly / debugging / training A magic combination breadboard pattern of isolated tie points Dimensions 49 x 37 x 9mm

Type a description for this product here...

Whether you’re pulling-up or pulling-down, there’s no need to frown! With the PUD HAT from ModMyPi, adding multiple pull-up or pull-down resistors to your Raspberry Pi project is easy! The PUD HAT is an expanded version of the...