MONK MAKES - PROJECT BOX 1 FOR RASPBERRY PI | SKU00080 The MonkMakes Project Box 1 for Raspberry Pi is a complete electronics starter kit designed for easy hands-on learning. It replaces the original Electronic Starter Kit with updated...

We got fed up with low quality, overly-long alligator clip leads, so we got some made to our specification. Our leads are supplied in a bundle of 10 leads. Two each of black, red, white, green and yellow. Each lead is 185mm (7.5 inches) long from tip to...

Connect your own PCB to a Raspberry Pi with this normal-height female header.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3mm of pins, compared with...

A 4-Way Riser perfect to use with the Raspberry Pi PoE HAT! SPECIFICATIONS Pitch: 2.54mm Gender of Connector: Female Number of Pins: 2 x 2 Pin Type of Row: Double-Row Body Orientation: Straight DIMENSIONS Overall Height: 11.2 mm Exposed...

Connect your own PCB to a Raspberry Pi and stack on top with this normal-height female header with extra long pins.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has extra...

If we could eat headers we’d have them for breakfast, lunch, and dinner. But we can’t : ( So we’re making the best of it and selling them! This 2×20-pin strip, right-angle female header is a perfect companion piece...

This is a cute half-size clear breadboard, good for small projects. It’s 2.2″ x 3.4″ (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to make the...

The Raspberry Pi is a wonderful little computer, but one thing it isn’t very good at is controlling DC Servo Motors – these motors need very specific and repetitive timing pulses to set the position. Instead of asking the Pi Linux kernel to...

This tiny DC Motor in Micro Servo Body is an interesting motor – it’s the same size and shape as our micro servo (like the FS90, FS90R, SG92R) but it isn’t a servo. It’s more like a DC motor + plastic...

Mini 170 Tie Points Prototype Solderless Breadboard Features With self-adhesive tape Suitable for electronic circuit assembly / debugging / training A magic combination breadboard pattern of isolated tie points Dimensions 49 x 37 x 9mm

Type a description for this product here...

Whether you’re pulling-up or pulling-down, there’s no need to frown! With the PUD HAT from ModMyPi, adding multiple pull-up or pull-down resistors to your Raspberry Pi project is easy! The PUD HAT is an expanded version of the...

It’s time to grab the most terrifying Raspberry Pi board ever devised this Halloween! Ahhhhhh! The Halloween Pumpkin Solder Kit is the designed for any maker or hacker and an ideal kit for people new to Raspberry Pi or even the experienced users...

Weight : 9 g Size : 22 x 11.5 x 27 mm Operating Speed (4.8V no load): 0.12sec/60 degrees Stall Torque (4.8V): 17.5oz/in (1.2 kg/cm) Temperature Range: -30 to +60 Degree C Dead Band Width: 7usec Operating Voltage:3.0-7.2 Volts  

Pi-BB-RPS provides Redundant Power Supply capability. Second power is the micro-USB power. Power is switched seamlessly between these two sources. Priority is given to power source with higher power Voltage. DC 5V and 3.3V is generated on the board. The...

This is a ‘full-size’ breadboard, 830 tie points. Good for small and medium projects. It’s 2.2″ x 7″ (5.5 cm x 17 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails...

The Raspberry Pi B+ / Pi 2 / Pi 3 / Pi 4 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably...

5V Four Channel SSR Solid Relay Module 240V / 2A - High Level Trigger - For Arduino Specifications Max. LoadAC: 240V Input Voltage: 5V DC Trigger Current: 2mA Dimensions: 2.28 in x 2.2 in x 0.94 in (5.8 cm x 5.6 cm x 2.4 cm) Weight: 1.34 oz (38 g)

This is a cute half-size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to make the breadboard as thin as 1.4"...

Allows two HAT or pHAT (or a mix) to be attached to a single Raspberry Pi 40-pin header. All pins are connected *except* ID_SD and ID_SC (HAT EEPROM), which have solder jumpers – this allows HATs which follow the specification correctly...