Micro USB Power Adapter 5V, 3A with International Plugs – For Raspberry Pi Zero, Zero 2 W and Pi 3 Boards The Micro USB Power Adapter 5V, 3A - International Plugs is designed to power any Raspberry Pi computer with a Micro-USB connector...

Waveshare 23884 - Uninterruptible Power Supply (UPS) Module, Supports Charging And Power Output At The Same Time, 3S & 5V 5A Output - UPS Module 3S (EN) This Uninterruptable Power Supply (UPS) module takes three 18650 lithium-ion...

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and...

Power Supply 19V 3.4A, 65W - 5.5mmx2.5mmx12mm Barrel - For IQaudio DigiAMP+This high quality power adapter delivers a stable 19V @3.4A and features a 5.5 mm x 2.5 mm barrel connector making it perfect for the IQaudio DigiAMP+...

Waveshare 20567 - UPS HAT (B) For Raspberry Pi, 5V Uninterruptible Power Supply, 5A High Current, Pogo Pins Connector Features Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc. I2C bus communication, monitoring the...

Dual Supply for Raspberry Pi (A+/B+/2B/3B/3B+) Power from each Micro USB connector goes via a MOSFET "Ideal Diode" which is then connected directly to the Micro USB socket on the Raspberry Pi. Data pins are not connected from either Micro USB port (as...

Waveshare 19694 - UPS Module For Raspberry Pi Pico Family, Uninterruptible Power Supply - Pico-UPS-A-EN Raspberry Pi Pico and Li-ion battery are NOT included. SAFETY CAUTIONS Li-ion and Li-po batteries are quite unstable. They may cause fire,...

Guaranteed reboot after shutdown. After a soft shutdown, the power on a Raspberry Pi needs to be toggled to reboot. This is done by pulling the USB power source out or installing an on/off switch. This becomes an issue when a Raspberry Pi is deployed...

A Raspberry Pi Zero and Pi Zero W (abbreviated here as PiZ) is a small size computer tethered to the wall power outlet. It needs the power via the micro-USB cable to operate. When PiZ needs to be moved from one location...

Raspberry Pi PoE+ Injector - SC1677 The Raspberry Pi PoE+ Injector is a single-port 30W injector suitable for powering devices conforming to the IEEE 802.3af specifications, including all generations of Raspberry Pi PoE HAT. It supports network...

Pi Modules - UPS PIco HV3.0B+ HAT Top-End 450 - PM_072  The UPS PIco HV3.0B+ HAT Top-End 450 is an advanced Intelligent Mobile Power Bank and Uninterruptible Power Supply especially designed for...

Uno Pi is a BitScope Blade designed to power and mount one Raspberry Pi and optional HAT. Uno Pi can also power and mount the Raspberry Pi Display. It's perfect for building industrial strength stand-alone physical computing solutions...

Waveshare 27736 - Industrial Gigabit PoE Splitter, 5V 5A Type-C, Onboard MPS Control Chip, Safer And More Stable Delivers stable 25W power via USB-C with IEEE 802.3at PoE+ support. Features onboard MPS control chip for enhanced safety,...

USB-C PD Power Supply for Raspberry Pi 5, 27W, ETL Listed, Black This USB-C PD Power Supply for Raspberry Pi 5 provides up to 27W of stable power. It supports multiple USB-C PD profiles for efficient delivery across loads. Certified by UL, CSA, and...

Pi Module - PIco Fan Kit HV3.0 - PM_007 - w/ Fan, Mounting screws, Temperature sensor, Spacers & Connector Note: This kit requires assembly and soldering. Each PIco Fan Kit need to be installed on UPS PIco by soldering of few...

External Arduino Programming Cable lets you use a PC or Mac to develop Sleepy Pi Apps Compatible with Sleepy Pi 1 and Sleepy Pi 2 Do I need this cable? No. You can develop code, debug and program the Sleepy Pi or Sleepy Pi 2 from...

External Programming Cable OR RPi Serial Console Do I need this cable? No. You can develop code, debug and program the Sleepy Pi or Sleepy Pi 2 from your Raspberry Pi quite happily… …But there are times when you...

Pi Modules - UPS PIco HV3.0B+ HAT Stack 450 PoE - PM_073 Note: This product requires soldering. The Raspberry Pi PoE HAT is NOT included and needs to be ordered separately. The UPS PIco HV3.0B+ HAT Stack 450 PoE is an...

Pi4, ClusterHAT, FanSHIM, etc. NOT included. Keep the 3.3v rail alive between reboots. When rebooting a Raspberry Pi 4 the 3.3 volt rail is reset which causes problems for some HATs. 3v3 Sustain fits in between a Raspberry Pi and a HAT/pHAT and...