Raspberry Pi Store | PiShop US

* Raspberry Pi

Sub Categories

Raspberry Pi HATs and Add-On Boards

Raspberry Pi Prototyping & GPIO

Raspberry Pi Screens & Displays

Panel Mount 10K potentiometer (Breadboard Friendly) - 10K Linear

$1.25

This potentiometer is a two-in-one, good in a breadboard or with a panel. Its a fairly standard linear taper 10K ohm potentiometer, with a grippy shaft. Its smooth and easy to turn, but not so loose that it will shift on its own. We like this one because...

Add to Cart

Breadboard-friendly SPDT Slide Switch

$0.95

These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch no matter what size fingers you have, but not so easy that they'll get flipped...

Add to Cart

Breadboard-friendly 2.1mm DC barrel jack

$0.95

This power jack is designed to fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project. We went for the more expensive "thin pin" type which snap into breadboards or perfboards. They will work where "thick pin"...

Add to Cart

Breadboard trim potentiometer - 10K

$1.25

These are our favorite trimpots, perfect for breadboarding and prototyping. They have a long grippy adjustment knob and with 0.1" spacing they plug into breadboards or perfboards with ease. This is the same pot that comes with our character LCDs and...

Add to Cart

Zero Camera Cable Adaptor for Raspberry Pi

$3.95

Connect Pi Zero and standard Raspberry Pi cables/cameras. The adaptor can be used to connect Pi Zero camera with integral (with 22-pin/0.5mm pitch) cable to full sized Raspberry Pi. Or with a 22 pin 0.5mm pitch cable you can connect up a Pi Zero to a...

Add to Cart

3v3 Sustain for Raspberry Pi 4

$4.45

Pi4, ClusterHAT, FanSHIM, etc. NOT included. Keep the 3.3v rail alive between reboots. When rebooting a Raspberry Pi 4 the 3.3 volt rail is reset which causes problems for some HATs. 3v3 Sustain fits in between a Raspberry Pi and a HAT/pHAT and...

Add to Cart

Solderless Zero Micro Dongle for Raspberry Pi Zero

$5.45

Convert your Pi Zero to a Micro USB dongle (no soldering required) Connect your Raspberry Pi Zero or Pi Zero W[H] directly to peripherals with a Micro USB port such as the Official Raspberry Pi Keyboard. When used with the official Raspberry Pi...

Add to Cart

Adafruit Raspberry Pi Camera Board Case with 1/4" Tripod Mount

$2.95

This is a basic, classic Adafruit Raspberry Pi Camera Board Enclosure with a black base and a clear top. The case is as minimal as it gets, coming in just two pieces of polycarbonate that snap snugly together. This case will keep...

Add to Cart

Giant Butterfly's Full Hardware Kit

$4.95

FOR USE WITH GIANT BUTTERFLY PCB Hardware Kit [ OPTIONAL ] The hardware kit includes everything you need to mount the Giant Butterfly PCB on your Raspberry Pi and then mount up to four HATs. 2xM2.5 18 mm M-F header 8xM2.5 12 mm F-F...

Add to Cart

APlusCam

$4.95

What is it? APlusCam is designed in the shape of a Raspberry Pi HAT with mounting holes for a Raspberry Pi Camera and suction cups allowing the camera can look out through a window. The original version of this was a PCB, but I've now updated it to...

Add to Cart

USB/PWR Splitter

$2.95

The adaptor allows the Raspberry Pi 4 to be used with a Pi Micro USB power supply (or DC barrel jack) whilst allowing access to the OTG USB. USB Type-A (data and power) <> USB Data (Micro USB) and Power (Micro USB/Barrel jack). USB Type...

Add to Cart

ClusterCTRL Stack

$59.95 $99.95

The ClusterCTRL Stack (controller and passive backplane) is a simple way to both power and control cooling for a stack of 5 Raspberry Pi. Controller Powered by 12-24V PSU. 20 pin header for Power (2x5V and 2xGND for each Pi). 6 pin header for...

Add to Cart

Stacking Header for Pi A+/B+/Pi 2/Pi 3 - 2x20 Extra Tall

$2.95

Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made extra-tall and extra-long 2x20 female header. The female header part has extra spaces to make it 23.5 mm tall: when placed on your Pi, a PCB will clear the...

Add to Cart

I2C Multiplexer (8 way) pHAT for Raspberry Pi

$10.95

The I2C multiplexer allows connecting multiple I2C devices with the same address onto a single I2C bus (PCB colour may vary). For each multiplexed output there are 4 pins - data ports SDAx, SCLx GND ground and V for power. The "V" output can be altered...

Add to Cart

Giant Butterfly PCB

$3.95 $4.95

Allows four HAT or pHAT (or a mix) to be attached to a single Raspberry Pi 40 way connector. All pins are connected, ID_SD and ID_SC (HAT EEPROM) have cuttable solder jumpers. For HAT/pHAT with an EEPROM (required by the HAT specification) you will...

Choose Options

Solderless Serial to USB adapter for Raspberry Pi Zero

$9.95

Caution! This product is NOT compatible with the new Raspberry Pi Zero W 2 Using solderless pins the adapter slides onto the back of a Pi Zero GPIO (If a permanent connection is required the adapter can still be soldered to the GPIO header). The...

Notify Me

USB Console Stub - Serial adaptor for Raspberry Pi

$4.95

USB to (3.3v) Serial adaptor for use with the Raspberry Pi with a pinout designed to plug straight onto Pi GPIO pins (26 or 40 pin). Its a low cost no fuss adaptor which uses built-in USB-CDC drivers on most modern operating systems (Win10/Linux/Mac OS...

Add to Cart

PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp

$10.95

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal...

Add to Cart

GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2/Pi 3 - (40 pins)

$3.95

That new Raspberry Pi® Model B+ computer you just got has a row of 2x20 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics, they are where the real fun is. By programming...

Add to Cart

Color Coded Header for Raspberry Pi

$1.95

Color Coded Header for Raspberry Pi - Easy Pin Identification The Color Coded Header for Raspberry Pi Zero and Zero W makes GPIO pinouts easy to follow. Each of the 40 pins is marked with a color for fast identification. Red is 5V, yellow is 3V, black...

Add to Cart

* Raspberry Pi

Sub Categories

Raspberry Pi 5

Raspberry Pi Accessories

Raspberry Pi Arcade

Raspberry Pi Boards

Raspberry Pi Cables

Raspberry Pi Cameras

Raspberry Pi Cases

Raspberry Pi Cooling

Raspberry Pi HATs and Add-On Boards

Raspberry Pi Networking

Raspberry Pi Power Supplies

Raspberry Pi Prototyping & GPIO

Raspberry Pi Screens & Displays

Raspberry Pi Services

Guides & Books

Raspberry Pi SD Cards

Swag

Raspberry Pi Kits

Panel Mount 10K potentiometer (Breadboard Friendly) - 10K Linear

Breadboard-friendly SPDT Slide Switch

Breadboard-friendly 2.1mm DC barrel jack

Breadboard trim potentiometer - 10K

Zero Camera Cable Adaptor for Raspberry Pi

3v3 Sustain for Raspberry Pi 4

Solderless Zero Micro Dongle for Raspberry Pi Zero

Adafruit Raspberry Pi Camera Board Case with 1/4" Tripod Mount

Giant Butterfly's Full Hardware Kit

APlusCam

USB/PWR Splitter

ClusterCTRL Stack

Stacking Header for Pi A+/B+/Pi 2/Pi 3 - 2x20 Extra Tall

I2C Multiplexer (8 way) pHAT for Raspberry Pi

Giant Butterfly PCB

Solderless Serial to USB adapter for Raspberry Pi Zero

USB Console Stub - Serial adaptor for Raspberry Pi

PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp

GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2/Pi 3 - (40 pins)

Color Coded Header for Raspberry Pi